SCI A2840/R Manuel utilisateur

OWNER’S MANUAL

INCLUDES:

•INSTALLATION

•OPERATION

•SPECIFICATIONS

•FEATURES

•MAINTENANCE

• 10 PURIFICATION

STEPS TOA

HEALTHY HOME IMPORTANT:

SAVE THIS BOOKLET!

Fresh Air, Surface and Fabric Regenerator

MORE THAN JUST

AIR PURIFIERS...

THEY HELP

TOSANITIZE

BOTH THE AIR

AND SURFACES

Air-Surface Sanitizer

A2840/R

I-4506 BR7580R-1 6/25/07 7:56 AM Page 2

CONTENTS

EdenPURE™ G-7 (WHOLE HOUSE MODEL)

SPECIFICATIONS.......................................................................................1

SAFETY WARNINGS..................................................................................2

FEATURES..................................................................................................3

INSPECTION & INSTALLATION.................................................................3

GENERAL OPERATION..............................................................................4

GENERAL MAINTENANCE.........................................................................5

MAINTENANCE DIAGRAMS.......................................................................6

CHANGING THE UV LAMP.........................................................................7

CHANGING THE FUSE...............................................................................8

TROUBLESHOOTING.................................................................................9

WARRANTY................................................................................................18

EdenPURE™ AREA MODEL

SPECIFICATIONS.......................................................................................1

SAFETY WARNINGS..................................................................................10

FEATURES..................................................................................................11

INSPECTION & INSTALLATION.................................................................11

ADVANCED FUNCTIONS...........................................................................12

GENERAL OPERATION..............................................................................13

FUNCTION OVERVIEW..............................................................................13

GENERAL MAINTENANCE.........................................................................14

WARRANTY................................................................................................18

10 PURIFICATION STEPS TO A HEALTHY HOME..................................15-17

Parts and Supplies: Contact the dealer you purchased your product from or visit

www.rppurchase.com to locate your closest dealer.

110v AC, 60Hz

1.6 amp slow blow fuse

5 - 70

Yes

5 Speeds

12 3/4” (H) x 8 7/8” (W) x 8 3/4” (D)

16 pounds

Up to 360 mg per hour

Up to 3000 sq. ft.

EdenPURE™ G-7

EdenPURE™ Area Model

Power

Fuse

Total Watts

Anion Ion Generator

Fan

Dimensions

Weight

Activated Oxygen Output

Coverage

Power

Total Watts

Anion Ion Generator

Fan

Dimensions

Weight

Activated Oxygen Output

Coverage

120v AC, 60Hz

30 - 45

Yes

3 Speeds

11 5/8” (H) x 12 5/8” (W) x 6 3/8” (D)

11 pounds

Up to 50 mg per hour

Up to 1000 sq. ft.

SPECIFICATIONS

I-4506 BR7580R-1 6/25/07 7:57 AM Page 3

EdenPURE™ G-7

READ AND SAVE THESE INSTRUCTIONS

VERY IMPORTANT:

•Read this manual carefully before operating.

• Do not operate unit if unfamiliar with this manual.

•Keep this manual for future reference.

SAFETY WARNINGS

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY, BASIC PRECAUTIONS SHOULD BE FOLLOWED INCLUDING:

•Disconnect power cord before performing any maintenance or service.

•The rear of the unit should always have at least one inch of open area to allow

unrestricted airflow.

• To prevent injury, be sure the power cord is not accessible to small children.

•The supplied power voltage must be uniform with the appliance’s permitted voltage

indicated on the back of the unit. Appliances with 110v/60Hz cannot be used with a

220v/50 Hz power supply.

•Only connect to a properly grounded 3 prong circuit receptacle.

•Do not alter the cord or any other part of the unit.

• Do not use with a broken ceramic plate.

•Do not look directly at the UVC bulb while it is operating.

•Do not use outdoors or on wet surfaces.

•Do not use with a damaged cord or plug.

•Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

•Do not operate the unit in areas where flammable, combustible products, or where

vapors may be present.

•Do not handle the plug or appliance with wet hands.

•Supervision is necessary when appliance is operated near children.

•Turn off all controls before unplugging unit from outlet.

•If appliance is not working as it should, has been dropped, damaged, left outdoors, or

dropped into water, contact the sales representative where you purchased the unit or

return it to your local service center.

I-4506 BR7580R-1 6/25/07 7:57 AM Page 6

·QUIET FIVE SPEED FAN

·ADJUSTABLE 24-HOUR CLOCK

·ADJUSTABLE POWER OFF TIMER

·ADJUSTABLE PURIFIER CONTROL (USED FOR RAPID ODOR REMOVAL AND

SURFACE STERILIZATION)

·ANION - NEGATIVE ION GENERATOR (NEGATIVE IONS CAUSE THE FLOATING

PARTICULATES TO CLING TOGETHER, FORMING A MASS WHICH DROPS

THEM TO THE FLOOR TO BE SWEPT UP)

·STERILIZE (UVC LIGHT HELPS REDUCE AIRBORNE GERMS AS THEY PASS

THROUGH THE UNIT)

·HELPS REDUCE SMOKE AND ODORS FROM YOUR HOME, OFFICE, CAR, BOAT,

RV, ETC...

·REDUCES MOLD, MILDEW AND BACTERIA

·REPLACEABLE UV LAMP

·REMOTE CONTROL OR MANUAL OPERATION VIA FRONT PANEL CONTROLS

·USER INTERFACE DISPLAY

·MAINTENANCE REMINDERS

·WASHABLE PURIFICATION PLATE

·WASHABLE PHOTO-CATALYTIC PROCESS SCREEN

·WASHABLE PRIMARY FILTER

·SLEEP MODE (DISABLES MOST OF THE DISPLAY LIGHTS, BUT UNIT CONTINUES

TO OPERATE)

·IMPROVES INDOOR AIR QUALITY

·USES STANDARD HOUSEHOLD CURRENT

1. Remove unit from shipping carton.

2. Check for shipping damage and loose or broken parts.

3. Remove any protective materials from the outside of the unit.

4. Read Owner’s Manual thoroughly prior to operating or servicing the unit.

5. Insert the battery into the remote by sliding the battery compartment open and placing

the battery with the positive side (+) facing up.

6. Open the Primary Filter by removing the four corner screws and remove all protective

materials from the inside of the unit, i.e. tape used to hold the Catalytic Screen and/or

UV Lamp in place.

7. Make sure Catalytic Screen is secure. (Refer to: “GENERAL MAINTENANCE”, page 5)

8. Make sure the purification plate is secure and fully inserted in its slot. (Refer to: Page 6

Diagram B)

9. Reinstall the Primary Filter and any other temporarily removed parts before continuing.

10. Determine placement location for the unit. We recommend placing it up higher if

possible. A securely fastened wall shelf would be an ideal location.

11. Plug the unit into a 3 prong grounded circuit receptacle.

FEATURES

INSPECTION & INSTALLATION

I-4506 BR7580R-1 6/25/07 7:57 AM Page 7

The unit can be operated using either the wireless remote or the front control panel.

1. On the rear of the purifier, switch the master power to the “on” position (the front display

will light up).

2. Press the ON/OFF button on the front of purifier to power on the unit. The fan will start.

3. Press the Fan▲and Fan▼buttons to adjust the airflow speed to your desired level.

4. Press the Purify▲and Purify▼buttons to set the purifier setting from Stage 1 through

Stage 5 to accommodate your desired level.

5. Press the Sterilize button to operate the UVC and Photo Catalyst sanitize feature.

Press the Sterilize button again to stop its operation. The UVC bulb will produce a

light blue glow on the inside of the unit when this feature is on. Note: Do not look

directly at the UVC Bulb while it is operating.

6. Press the Anion button to turn on the negative ion generator. Press the Anion button

again to stop the negative ion generator function.

Sleep Button

Press the Sleep button to use the screen saving mode. This will turn most of the

display lights off. Press any button on the front panel to deactivate the sleep mode.

The working mode of Anion, Purify, Sterilize, and Fan Speed will not change while in

sleep mode. If the timer function is set to turn the power off at a set time, do not use

the sleep function. The timer will only deactivate the sleep mode instead of shutting

down the unit if the sleep mode is on.

Time/Set Button

Read these instructions thoroughly before setting the time.

*** After 8-10 seconds of inactivity, the clock will be set or you will have to start the process again. ***

The clock is a 24-hour clock; 13:00 would be 1:00 p.m.

To set the current time:

1. Press the Time/Set button twice. “Time” will blink on the display.

2. The Purify▲and Purify▼buttons adjust the hours. The Fan▲and Fan▼buttons

adjust the minutes.

To set the power off timer:

1. While the unit is operating, press the Time/Set button once. “Time/Set”will blink on

the display.

2. The Purify▲and Purify▼buttons adjust the hours. The Fan▲and Fan▼buttons

adjust the minutes.

GENERAL OPERATION

OFF

Power Switch Time Fan Speed Operating Display Operating Buttons

Sterilizer Feature Purifier Feature (5 Stages) Anion Feature

Remote

I-4506 BR7580R-1 6/25/07 7:57 AM Page 10

UNPLUG THE UNIT BEFORE PERFORMING ANY MAINTENANCE PROCEDURES

Recommended Monthly Maintenance

•Clean the Primary Filter

•Clean the Purifier Plate

•Clean the Catalytic Screen

PRIMARY FILTER & CATALYTIC SCREEN CLEANING

You have three options to clean the Primary filter and the Catalytic Screen:

1. When visibly dirty or after 30 days, remove the primary filter and the catalytic screen

from the unit. With a hand-held vacuum, remove the heavy particulates from both

filters. This method will extend the life of the filters and ensure proper function of the

catalytic screen.

2. If vacuuming does not clean the filter sufficiently, remove the primary filter and the

catalytic screen from the unit and wash them in warm water. Brush gently with a

toothbrush to remove particulates. Allow to dry thoroughly before re-installing.

NOTE: Do not use soap because it could damage the filters.

3. If a replacement or additional filter and/or catalytic screen are needed, contact the

dealer you purchased your product from or visit www.rppurchase.com to locate your

closest dealer.

CLEANING THE PURIFICATION PLATE

1. Remove the Purification Plate (see Purification Plate and Catalytic Screen Removal below).

2. Wash the Purification Plate with about 1 drop of mild dish soap (per side) and a toothbrush.

3. Use the toothbrush to make small circular motions over all of the metal mesh areas.

Be careful not to drop or break the Purification Plate while cleaning.

4. Rinse with water and allow it to air dry completely before reinstalling.

PRIMARY FILTER REMOVAL

1. Unplug the power to the unit.

2. Unscrew the four rear corner screws from the Primary filter and pull the filter handle

to remove. Refer to Diagram A

3. After servicing Primary filter, place it back in its original position and re-install the

four corner screws.

PURIFICATION PLATE AND CATALYTIC SCREEN REMOVAL

1. Remove Primary filter.

2. Carefully remove the Purification Plate pulling it straight out. This is an ideal time to

clean the Purification Plate. Refer to Diagram B.

3. Gently pull the Catalytic Screen handle to remove it for cleaning. Refer to Diagram C.

4. After servicing Catalytic Screen, place it back in its original position by placing the

bottom of screen in first.

5. Carefully re-insert the Purification Plate into its original position. Make sure the

Purification Plate is fully inserted.

6. Place the Primary filter back in its original position and re-install the four corner screws.

GENERAL MAINTENANCE

I-4506 BR7580R-1 6/25/07 7:57 AM Page 11

I-4506 BR7580R-1 6/25/07 7:57 AM Page 14

UNPLUG THE UNIT BEFORE PERFORMING ANY MAINTENANCE PROCEDURES

CHANGING THE UV LAMP

1. Unplug the power to the unit.

2. Remove the Primary filter by removing the 4 corner screws.

3. Remove the tape on either end of the UV Lamp if it is present.

4. Place one finger from each hand (middle or index) on the metal ends of the UV

Lamp. Very carefully, apply just enough pressure to roll the lamp (preferably

towards the back of the unit) until it is loose. Note: Be careful not to cut

yourself when removing the UV lamp.

5. Remove the old UV Lamp and insert the new one by aligning the end pins to slide

into the end sockets (just like a standard fluorescent bulb).

6. Once both sets of end pins are in their slots, place one finger from each hand

(middle or index) on the metal ends of the UV Lamp. Very carefully apply just

enough pressure to roll the lamp (preferably towards the back of the unit) until it is

secure on both ends. Note: Be careful not to cut yourself when reinstalling

the UV lamp.

7. Place the Primary filter back in its original position and re-install the four corner screws.

8. Plug the power cord back into the unit and turn it on. Confirm the new UV Lamp is

functioning properly. If it is not working properly, repeat steps 1, 2, and 6. Test the

UV Lamp again.

GENERAL MAINTENANCE CONTINUED

I-4506 BR7580R-1 6/25/07 7:57 AM Page 15

UNPLUG THE UNIT BEFORE PERFORMING ANY MAINTENANCE PROCEDURES

CHANGING THE FUSE

1. Unplug the power to the unit.

2. Remove the fuse holder by using your fingernail or a flat blade screwdriver.

3. Remove the blown fuse and use it to push out the spare fuse.

4. Place the new fuse into place and re-insert fuse holder.

5. Plug the power cord back into the unit and turn the master power on.

GENERAL MAINTENANCE CONTINUED

I-4506 BR7580R-1 6/25/07 7:57 AM Page 18

1. Ihave plugged in the unit, turned “ON” the main power switch (on the back of

unit), pressed the ON/OFF button on the remote (or the front panel) and nothing

happens. What’s wrong?

•Make sure the power cord is inserted completely into the receptacle on the back of the unit.

•Make sure the electrical outlet is capable of providing power to the unit.

•Check the primary filter located on the back of the unit to ensure that the safety switch

activator clip depresses the safety switch.

•Check to see if the proper fuse is installed and that it is operational.

2. The fan is operating but the purifier plate is not working or the purifier lights are

blinking. What’s wrong?

•Check the purifier plate to see if it is cracked or broken. If so, the purifier plate will

need replaced.

•Ensure maintenance procedures required for the purifier plate have been performed

according to the “General Maintenance” section of this Owners Manual. Order new

plates from your dealer if needed.

•Electrical contacts are not contacting the screen portion of the purifier plate. Unplug

and inspect the unit for any loose connections.

•Make sure the purification plate is fully depressed into slot.

•Do not attempt to disassemble or service the unit or you will void the warranty.

3. The purifier plate is making a noise, has a burning smell, and/or appears to

arc/spark. What is the problem?

•The purifier plate is most likely cracked. Refer to the answers for question # 2.

4. The UV lamp is not functioning or the sterilize display light is blinking.

•Check lamp for proper installation. See General Maintenance section of this Owners Manual.

•Replace UV Lamp. Order a new UV bulb from your dealer if needed.

5. What are the most typical application problems?

•Symptom: Abelief that the equipment is placed in the proper environment, but

its operation appears unsuccessful.

Problem: Lack of air movement, improper placement of the unit.

•Symptom: Strong odors still remain within the environment after operating the unit.

Problem: Purifier setting is too low or improper placement of the unit.

•Symptom: Astrong odor of activated oxygen is present within the environment.

Problem: Purifier setting is too high and/or a lack of air movement.

•Symptom: Visible haze of smoke and/or particulate remains within the environment.

Problem: Lack of air movement, Anion feature is not turned on, or improper

placement of the unit.

6. How can I tell if the UV lamp is functioning?

•The UV lamp will produce a glow that is visible through the front grill under low light

conditions.

•CAUTION: Do not look directly at the glowing lamp.

7. The unit does not operate.

•Is the unit plugged in?

•Are you sure the outlet is active?

•Is the main power switch turned on?

•Is the rear primary filter installed properly and depressing the safety switch inward?

•Does the fuse need to be replaced?

•Is the unit properly placed away from objects that may obstruct airflow?

•Is the primary filter clean?

•Is the catalytic screen clean?

•Is the purifier plate clean?

If your unit fails to operate properly after performing troubleshooting, contact your Sales

Representative or Service Center for further assistance.

Alist of available Sales Representatives and Service Centers can be located by visiting

our website at www.rppurchase.com or by calling 866-786-8946.

TROUBLESHOOTING

I-4506 BR7580R-1 6/25/07 7:57 AM Page 19

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SCI Purificateur d'air

SCI

SCI EdenPURE G-7 Manuel utilisateur

Manuels Purificateur d'air populaires d'autres marques

IKEA

IKEA UPPÅTVIND Manuel utilisateur

Nash

Nash AP-1 PureSmart Manuel utilisateur

LG PH-U450 Series Manuel utilisateur

DeLonghi

DeLonghi DDSX 220WFA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manuel utilisateur

Sharp

Sharp FU-40SE Manuel utilisateur

Philips

Philips AC2721 Manuel utilisateur

Hitachi

Hitachi EP-A3000 Manuel utilisateur

TruSens

TruSens Z-2000 Manuel utilisateur

Motorola

Motorola MBP87SN Manuel utilisateur

Beko

Beko ATP 7100I Manuel utilisateur

Carrier

Carrier INFINITY 1620 Manuel utilisateur

AtmosAir

AtmosAir P2002 Manuel utilisateur

Winix

Winix NK300 Manuel utilisateur

Friedrich

Friedrich C-90A Instructions d'utilisation et d'installation

Surgically Clean Air

Surgically Clean Air JADE2.0 Manuel utilisateur

Base aire

Base aire 555 Pro Manuel utilisateur

Champion

Champion CP25 Manuel utilisateur