Schluter Systems DH E RS D Manuel utilisateur

DH E RS /BW

Smart Non Programmable

Electronic Thermostat for Heating Cable

User’s Guide

For further information or to consult this guide online,

please visit www.schluter.com

554584 01/2014

WARNING WARNING

Before installing and operating this product,

the owner and/or installer must read,

understand and follow these instructions

and keep them handy for future reference.

If these instructions are not followed, the

warranty will be considered null and void

and the manufacturer deems no further

responsibility for this product. Moreover, the

following instructions must be adhered

to in order to avoid personal injuries or

property damages, serious injuries and

potentially fatal electric shocks. All electric

connections must be made by a qualiﬁed

electrician, according to the electrical and

building codes effective in your region. Do NOT

connect this product to a supply source other

than 120 VAC, 208 VAC or 240 VAC, and do not

exceed the speciﬁed load limits. Protect the

heating system with the appropriate circuit

breaker or fuse. You must regularly clean dirt

accumulations on or in the thermostat. Do

NOT use ﬂuid to clean thermostat air vents.

Do NOT use where exposed to water.

1. Description

The DH E RS /BW non programmable electronic thermostat

can be used to control heating ﬂoors with electrical current −

with a resistive load − ranging from 0 A to 16 A at 120/208/240

VAC. It has an easy user interface. It keeps the temperature

of a room ( mode) and a ﬂoor ( mode) at a requested

set point with a high degree of accuracy.

Floor Mode (factory setting)

This control method is ideal in areas where you want a warm

ﬂoor at any time and when the temperature of the ambient

air can be high without causing discomfort. For example, in

a bathroom.

Ambient Mode / (you only have to press down the

A/F button to switch from one mode to the other)

This control method is ideal when you want a stable ambient

air temperature (without ﬂuctuation). Usually, this mode is

used in large and often occupied rooms where temperature

variations can be uncomfortable. For example, in a kitchen, a

living room or a bedroom.

Some factors cause variations in ambient air temperature.

They include large windows (heat losses or gains due to

outside temperature) and other heat sources such as a

central heating system, a ﬁreplace, etc. In all these cases,

the mode will ensure a uniform temperature.

This thermostat is not compatible with the following

installations:

• electrical current higher than 16 A with a resistive load

(3840 W @ 240 VAC, 3330 W @ 208 VAC and 1920 W @

120 VAC);

• inductive load (presence of a contactor or relay); and

• central heating system.

Parts supplied:

• one (1) thermostat;

• two (2) mounting screws;

• four (4) solderless connectors suitable for copper wires;

• one (1) ﬂoor sensor.

2. Installation

Thermostat selection and sensor location

The thermostat must be mounted on a connection box, at

around 1.5 m (5 feet) above the ﬂoor level, on a section of the

wall exempt from pipes or air ducts.

Do not install the thermostat in a location where

temperature measurements could be altered. For example:

• close to a window, on an external wall, or close to a door

leading outside;

• exposed directly to the light or heat of the sun, a lamp, a

ﬁreplace or any other heat source;

• close or in front of an air outlet;

• close to concealed ducts or a chimney;

• in a location with poor air ﬂow (e.g. behind a door), or with

frequent air drafts (e.g. head of stairs).

To install the sensor, refer to the installation guide of your

heating ﬂoor.

Thermostat mounting and connection

1. Cut off power supply on lead wires at the

electrical panel in order to avoid any risk of

electric shock. Ensure that the thermostat will

be installed on a junction box located in an

uninsulated wall.

2. Ensure that the air vents of the thermostat are clean and

clear of any obstructions.

3.Using a screwdriver, loosen the screw retaining the

mounting base and front part of the thermostat. Remove

the front part of the thermostat from the mounting base by

tilting it upward.

4. Align and secure the mounting base to the connection box

using the two screws supplied.

5. Route wires coming from the wall through the hole of the

mounting base and make the required connections using

the “Four-wire installation” ﬁgure, and using the supplied

solderless connectors. A pair of wires (black) must be

connected to the power source (120-208-240 VAC) and

another pair (yellow) must be connected to the heating

cable (refer to the drawings displayed on the back of the

thermostat). For connections with aluminum wires, you

must use CO/ALR connectors. Please note that thermostat

wires do not have polarity, meaning that any wire can be

connected to the other. Then, connect the wires of the

ﬂoor temperature sensor at the indicated location behind

the thermostat.

Four-wire installation

6. Reinstall the front part of the thermostat on the mounting

base and tighten the screw at the bottom of the unit.

7. Turn on the power.

8. Set the thermostat to the desired setting

(see the following section).

3. Operation

First start-up

At the ﬁrst start-up, the thermostat is initially in the Day

and modes. The temperature is displayed in degrees

Fahrenheit and the standard factory set point adjustment

is 25°C (77°F). The maximum ﬂoor temperature is limited to

28°C (82°F).

Maximum ﬂoor temperature limitation

At any time, the ﬂoor temperature (both in and modes)

is maintained at less than 28°C (82°F) in order to avoid

overheating caused by an excessive heating request, which

could damage some materials or be detrimental for health.

TEST

Smart mode

Security mode

Night mode

Day mode

Red Indicator

(GFCI Test)

GFCI button

(Ambient mode)

(Floor mode)

Temperature set points

The ﬁgures beside the icon indicate the temperature set

points (both in and modes). They can be displayed

in degrees Celsius or Fahrenheit (see “Display in degrees

Celsius/Fahrenheit”).

Out of any adjustment mode, press down the + button to

increase the set point, or the - button to decrease it. Set

points can only be adjusted by increments of 1 degree. To

quickly scroll through the set point values, press and hold

down the button. Both in Manual and Smart modes, the

mode set points can range between 3 and 35°C and

can only be adjusted by increments of 1°C (from 37 to

95°F; by increments of 1°F from the Fahrenheit mode).

From mode, the set points can range between 3 and

28°C (from 37 to 82°F).

In Day mode, you can turn off the thermostat by lowering the

set point below 3°C (37°F). The set point value displayed will

be --, and heating system start up will be impossible.

Day mode and Night mode

The thermostat includes a Day mode (represented by a sun)

and a Night mode (represented by a moon), both of them

having their own independently adjustable and recorded

set point. When switching from one mode to the other, the

system will automatically use the temperature set point

corresponding to the Day/Night mode selected. The and

temperature are displayed by the ﬁgures under the

and icons, and the temperature set points are displayed

by the ﬁgures beside the icon, both in degrees Celsius or

Farenheit. The standard factory set point adjustment is 25°C

(77°F) for the Day/ mode (21°C – 70°F from the mode),

and 22°C (72°F) for the Night/ mode (18°C – 64°F from

the mode).

In order to manually switch from one mode to the other,

simultaneously press down the + and - buttons and release

them immediately.

Night mode timer

The Night mode features a timer that automatically returns

to the Day mode after a selectable time period. This timer

allows the temporary use of a temperature set point. The

standard factory adjustment of the timer is 8 hours. With

this adjustment, the thermostat automatically returns to

Day mode 8 hours after being switched to the Night mode.

You can switch from the mode to the mode without

affecting the timer adjustment.

For example, if you want a night temperature lower than the

day temperature, both Day/Night modes set points will ﬁrst

have to be set at the desired temperatures. Before bedtime,

the Night mode temperature set point will be activated by

switching manually to the Night mode. The timer is set for the

duration of the night. The thermostat will automatically return

to the Day mode at the end of the night, and the Day mode

temperature set point, which is higher, will become effective

at this time.

Night mode timer adjustment procedure

1. First, switch to the Night mode by simultaneously pressing

down the + and - buttons and releasing them immediately.

2. From the Night mode, simultaneously press down the +

and - buttons for more than 3 seconds until the icon

starts to blink, indicating that the adjustment of the Night

mode timer is effective. The ﬁgures that replace the

mode temperature indicate the current adjustment of the

timer and ‘‘hrs’’ replaces the mode temperature.

3. If needed, adjust the timer by pressing down the + button

to increase the value, or the - button to decrease it. The

adjustment range is from 1 hour to 999 hours. To quickly

scroll through timer values, press and hold down the

button.

4. When the adjustment is completed, release the buttons

and wait for 5 seconds to exit the adjustment function. The

thermostat will then return to the Night mode.

Note: The Night mode timer will be automatically reinitialized

to the latest recorded value when switching from the

Day mode to the Night mode. It is not necessary to

readjust the timer every time you switch to the Night

mode. The timer is also reinitialized when this value

is adjusted. Once the timer has completed its cycle

and when the thermostat is in the Day mode, you

must manually return to the Night mode. If you want

to automatically return to the Night mode, the Smart

mode must be selected.

Smart mode

The Smart mode, which is associated to the Night mode

timer, allows alternating between the Day/Night modes and

the two corresponding set points over a 24-hour period.

Once activated, this mode allows an automatic return to the

Night mode after 24 hours. The Smart mode allows you to

deﬁne two periods in a single day with different set points.

For example, if the Smart mode is activated and the Night

mode timer is set at 8 hours, the thermostat will be operating

in the Night mode for 8 hours at the night temperature set

point. Then, it will return to the Day mode for 16 hours

operating at the day temperature set point. At the end of the

24-hour cycle, the thermostat will return to the Night mode,

and the cycle will start again. The 24-hour cycle starts with

the Night mode as soon as the Smart mode is activated. The

Smart mode activation should be made when you want to

return to the Night mode. The normal course of a cycle in the

Smart mode is as follows:

1- Night mode: activated for the duration of the Night mode

timer cycle. It returns to the Day mode when the timer

cycle is completed.

2- Day mode: activated for the remaining time of the

24-hour cycle. It returns to the Night mode at the end of the

24-hour cycle.

Autres manuels pour DH E RS D

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Schluter Systems Thermostat

Schluter Systems

Schluter Systems DH E RT 102/BW Manuel utilisateur

Schluter Systems

Schluter Systems DH E RS D Manuel utilisateur

Schluter Systems

Schluter Systems DH E RT6 Manuel utilisateur

Schluter Systems

Schluter Systems DHERT103/BW Manuel utilisateur

Schluter Systems

Schluter Systems DH E RT2/BW Manuel utilisateur

Schluter Systems

Schluter Systems DITRA-HEAT-E-RS1 Manuel utilisateur

Schluter Systems

Schluter Systems DH E RT5 / BW Manuel utilisateur

Schluter Systems

Schluter Systems DH E RT6/BW Manuel utilisateur

Schluter Systems

Schluter Systems DITRA-HEAT-E-R Manuel utilisateur

Schluter Systems

Schluter Systems DITRA-HEAT-E-WiFi Manuel utilisateur

Schluter Systems

Schluter Systems DITRA-HEAT-E-RS1 Manuel utilisateur

Schluter Systems

Schluter Systems DH E RT2 / BW Manuel utilisateur

Schluter Systems

Schluter Systems DH E RT2 / BW Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur