Scantech iReal 2S Manuel utilisateur
Color 3D Scanner
iReal 2S
User Manual
V1.120
2019.12
CONTENTS
Introduction .................................................................................................................... I
Basic label ..................................................................................................................... II
Please use it correctly.................................................................................................... II
Normal Announcement ................................................................................................. II
Operation Announcement ............................................................................................ III
Accident Announcement .............................................................................................. III
Storage Announcement ................................................................................................ IV
1 Product description ..................................................................................................... 1
2 Precautions before using ............................................................................................. 2
2.1 Product Configuration ...................................................................................... 2
2.2 Product structure .............................................................................................. 5
2.3 Before you using .............................................................................................. 7
3 Software and hardware installation ............................................................................. 8
3.1 Software Installation ........................................................................................ 8
3.2 Hardware connection ..................................................................................... 10
3.3 Software operating environment settings ....................................................... 11
3.4 Device file configuration ............................................................................... 12
4 Quick start process .................................................................................................... 13
4.1 Calibration...................................................................................................... 13
4.2 Basic scan process.......................................................................................... 15
5 Software function ...................................................................................................... 19
5.1 Main Interface function .................................................................................. 19
5.2 Free Settings Function ................................................................................... 21
5.3 Scan interface function .................................................................................. 24
6 Scan Example............................................................................................................ 29
6.1 Marker splicing .............................................................................................. 29
6.1.1 Paste markers before scanning ............................................................ 29
6.1.2 Scan parameter settings....................................................................... 30
6.1.3 Marker splicing process ...................................................................... 31
6.2 Texture splicing .............................................................................................. 32
6.2.1 Scan parameter settings....................................................................... 32
6.2.2 Texture splicing process ...................................................................... 33
7 Software function introduction ................................................................................. 34
7.1 Point cloud process ........................................................................................ 34
7.1.1Outliers ................................................................................................. 34
7.1.2 Disconnected components .................................................................. 35
7.1.3 Delete overlapping .............................................................................. 35
7.2 Extended functions ......................................................................................... 36
7.2.1 Point calculation.................................................................................. 36
7.2.2 Surface selection calculation ............................................................... 37
7.2.3 Color Magic Wand .............................................................................. 38
7.3 Model splicing ............................................................................................... 38
8 Skills ......................................................................................................................... 40
8.1 Basic Scanning Techniques ............................................................................ 40
8.2 Human Body (hair) scanning techniques ....................................................... 41
9 Info ............................................................................................................................ 42
iReal 2s Handheld Color 3D Scanner User Manual
I
Introduction
Please read user manual before start.
After reading, keep it safely for next time review.
All Rights Reserved @ 2019-2020 Hangzhou SCANTECH COMPANY
(杭州思看科技有限公司 2019-2020)
Some part or all this manual can’t be copied, reproduced or transmitted in any form
without the paperwork permission of Hangzhou SCANTECH COMPANY.
Notice
The products, services or characters you have purchased will be constrained by the
commercial contract and terms of Hangzhou SCANTECH COMPANY. The range of
your purchase or use may not include some part or all the products, services or
characters described in this manual. Unless there is another permission in the contract,
Hangzhou SCANTECH COMPANY won’t make any representations, warranties or
implied, regarding the contents of this manual.
Hangzhou SCANTECH COMPANY will do the best to guarantee the accuracy and
completeness of the information in the manual, but the express statement does not
represent any commitment of Hangzhou SCANTECH COMPANY. There is no
responsibility for the errors or omissions of manual. Accepting this manual means the
customer admit that Chinese version shall prevail if there is any inconformity between
the Chinese version and the non-Chinese version.
Hangzhou SCANTECH COMPANY reserves the rights to change any information in
the manual at any time. If the information contained in this manual has been changed,
our company won’t notice customer.
All Rights Reserved, Copyright, Infringement Must Be Investigated!
iReal 2s Handheld Color 3D Scanner User Manual
II
Basic label
This manual will use the following labels to describe different significance, so please
red carefully and make sure understand all of labels.
Fail to obey the announcement will cause dangerous situation or
injuries and deaths
Fail to obey the announcement may cause dangerous situation or
injuries and deaths
Fail to obey the announcement may cause minor injury
Fail to obey the announcement may damage product or surrounding
Safety Announcement
During scanning process, must obey announcement and use product
correctly
Please use it correctly
To avoid malfunction of the KSCAN series and to ensure proper use, please
observe the following precautions.
Normal Announcement
Before starting work, please confirm the function and performance
of this product, and the equipment can operate normally.
If the product malfunction, please turn off the power immediately
for preventing other damage.
Please don’t change temperature suddenly during product use,
otherwise condensation will cause equipment failure.
For out of the working range, and modified products, the company
does not guarantee its function and performance.
When this product is combined with other equipment, it may not be
able to satisfy the function and performance depending on the
Attention
Danger
Caution
Warning
Caution
Attention
Notice
iReal 2s Handheld Color 3D Scanner User Manual
III
conditions of use and the environment. Therefore, please pay
attention to it before use.
Operation Announcement
Please choose the correct power supply voltage. Otherwise
malfunction will cause failure or fire.
Please do not disassemble or modify the unit. Otherwise
malfunction will cause failure or fire.
In order to use this product properly and safely, please try to
avoid the following places, otherwise it may cause malfunction.
high humidity or dust；
Corrosive or flammable gas；
Splashes of water, oil, chemicals；
static electricity.
Dirty dirt, water or oil stains may affect the use of the product and
cause measurement deviations；
When it is attached to the surface of the product glass: blow off
the dirt with clean air. When the soil is dirty, wipe it off with a
soft cloth dampened with alcohol.
When it is attached to the surface of the object: please blow off
the dirt with clean air or wipe off the dirt with a clean soft cloth.
If the measuring object vibrates, it may cause a deviation in the
measured value.
After turning on the power, wait about 5-10 minutes before use.
Since the circuit will not stabilize immediately after the power is
turned on, the measured value may be deviated.
Accident Announcement
Turn off the power immediately when the following phenomenon
occurs. If you continue to use it, it may cause equipment failure.
Water or foreign matter inside the device；
The device is dropped, or the casing is damaged;
The device emits smoke or an unusual smell.
Warning
Attention
Attention
iReal 2s Handheld Color 3D Scanner User Manual
IV
Storage Announcement
Do not wipe the product with a damp cloth, volatile oil, thinner,
etc. Otherwise, the product may be discolored or deformed.
When the soil is dirty, use a cotton cloth to remove the diluted
neutral detergent, wring it out, wipe it, and then wipe it off with a
soft cloth.
Please try to avoid the following places for storage；
high humidity or dust；
Corrosive or flammable gas.
Attention
iReal 2s Handheld Color 3D Scanner User Manual
1
1 Product description
Handheld 3D scanners usually include a light source (laser or white light, etc.), a
structured light projector, two (or more) industrial cameras, a computing unit for 3D
digital image processing, and a calibration board for calibrating the above equipment
and Markers and other attachments. IReal 2S is a cost-effective handheld color 3D
scanner carefully upgraded by Hangzhou Scantech. It can scan without sticking points,
and can obtain high-definition delicate color textures, which fully meets the user's
scanning needs for large and medium-sized objects and human body parts. Lightweight
and portable design, easy-to-use software, ideal for handheld scanning users in non-
industrial fields.
This manual mainly introduces the use of iReal 2S series handheld color 3D
scanners (hereinafter referred to as iReal 2S scanner, iReal 2S or scanner).
iReal 2s Handheld Color 3D Scanner User Manual
2
2 Precautions before using
This chapter mainly introduces the product configuration, product structure, and
device connection of the scanner.
2.1 Product Configuration
Please take out the security box with the scanner from the outer paper box, and
check whether the box contains the following standard items.
Standard configuration:
(1) Main body of iReal 2S handheld color 3D scanner: its shape is shown in Figure
2-1.
Figure2- 1 Handheld color 3D scanner
(2) Calibration plate: Referred to as the calibration plate, the shape of the
calibration plate is shown in Figure 2-2.
Figure2- 2 Calibration plate
iReal 2s Handheld Color 3D Scanner User Manual
3
(3) Power data cable: Shape shown as Figure 2-3
Figure2- 3 Power data cable
(4) Power adapter: Figure 2-4 shows the shape of the power adapter.
Figure2- 4 Power adapter
(5) Marking points: Figure 2-5 shows the shape.
Figure2- 5 Marking points
It is mainly used to calibrate camera parameters. In order to ensure
good data quality, the camera needs to be calibrated with a quick
target plate before the scanner is started or when temperature changes
or scan data quality is not good.
The DC interface is connected to the power adapter to power the
scanner; the Type A interface is connected to the computer and the
scan data is transmitted to the computer; the Type B interface is
connected to the scanner.
Connect to the device through a power data cable to provide external
power.
Notice
Notice
Notice
Table des matières
Autres manuels Scantech Scanner
