SC&T HE01SI Manuel utilisateur

Smart Cabling & Transmission Corp.

V1.0_1604120

HDMI Extender

User Manual

Model : HE01SI

HDMI & IR CAT5e Extender 1080p 40M

User Manual

HE01SI

Introduction

HE01SI is an HDMI extender that uses an Ethernet cable to extend HDMI signal with transmission distance

up to 70 meters and resolution up to 1080p. The extender transmits a 2-way IR signal from either TX or RX

side. The Tx unit has a built-in EDID auto backup function that can save desired resolution and restore it

whenever.

Features

Resolution up to 1080p@60Hz.

Signal extension up to 70M over CAT5e cable.

Supports IR extension, the signal from either TX or RX side.

Built-in EDID auto backup function at RX unit.

Installation view

Panel View & Function

HE01SIT

EDID Setup

Use default EDID:

Move DIP switch 1 off ↑

Move DIP switch 2 off ↑Select the first default EDID: support 1080i / LPCM 2 Channel.

Move DIP switch 2 on ↓Select the second default EDID: support 1080p / LPCM 5.1 Channel.

User Manual

HE01SI

Use External EDID

1. Move DIP switch 1 on↓, HE01SIT unplug the power.

2. HE01SIT connect to HDMI connector of TV for auto backup.

3. Plug the power for HE01SIT, TV EDID back up completed (Blue Power LED keep flash)

4. After complete TV EDID backup, HE01SIT power must be reset (unplug and plug) to activate the

new EDID.

HE01SIT Transmitter Unit LED Indication

BLUE ON Power on

Flash TV EDID backup completed

RJ45 Connector LED

GREEN ON Sending power or video to receiver unit

YELLOW ON No data input or unsupported video format

Dip Switch function

1. ↑Use the default EDID.

↓Use the backup TV EDID.

2. ↑Select the first default EDID: Support 1080i / LPCM 2 Channel.

↓Select the second default EDID: Support 1080p / LPCM 5.1 Channel.

After complete Dip Switch setting, power must be reset (Unplug and plug) to activate the new EDID.

HE01SIR

HE01SIR Receiver unit LED Indication

BLUE ON Using external power adapter

GREEN ON Power and HDMI signal received from transmitter unit

YELLOW ON No data input or signal too weak

User Manual

HE01SI

IR Switch Setting

1. When use BD/DVD remote controller (DVD at remote side)，HE01SIR IR switch move to RX and connect

with Receiver cable; HE01SIT IR switch move to TX and connect with Emitter cable.

2. When use TV remote controller (TV at remote side), HE01SIT IR switch move to RX and connect with

Receiver cable; HE01SIR IR switch move to TX and connect with Emitter cable.

Cable

Link cable use high quality CAT5e UTP or CAT6 UTP cable.

CAT6 cable is recommend based on distance over 30 meters.

Do not use STP cable which caused no picture.

Transmission Distance

The transmission distance will be affected from different HDMI equipment and cable quality.

HE01SIT to HE01SIR

Resolution/Cable

Distance(Meter)

1080p/CAT5e

1080p/CAT6

1080i,720p/CAT5e

RJ45 Define

Video Link (use TIA/EIA-568-B)

1. Orange-white

TMDS DATA2 +

2. Orange

TMDS DATA2 -

3. Green-white

TMDS CLOCK + / HDMI 5V

4. Blue

TMDS DATA1 +

5. Blue-white

TMDS DATA1 -

6. Green

TMDS CLOCK - / HDMI 0V

7. Brown-white

TMDS DATA0 +

8. Brown

TMDS DATA0 -

User Manual

HE01SI

Caution

1. The wiring must away from any equipment with electromagnetic wave, i.e.:

Mobile phone, microwave, radio equipment, fluorescent lamp, power lines.

2. If distance less 20meters and not using IR function, HE01SIR do not need external power adapter.

3. This device is not network device, do not connect with Network to avoid damage.

Specification

ITEM NO.

HE01SIT

HE01SIR

Support

Compliance

HDMI 1.3, HDCP, 3D

Max. Video Resolution

1080p@60Hz

Max. Transmission Distance

60M at 1080i, 40M at 1080p

IR Support

30-60KHz, ±30°, 5M

30-60KHz, ±55°, 5M

Ports & Interfaces

Video Input

1 x HDMI Type A

1 x RJ45

Video Output

1 x RJ45

1 x HDMI Type A

IR Interface

1 x 3.5mm Phone Jack

Switch

1 x 2 Pin Dip Switch, 1 x Slide

Switch

1 x Slide Switch

Power

Power Supply

DC 5V 1A

Power Consumption

420mA

180mA

Ambient Temperature

Operation

0 to 55℃

Storage

-20 to 85℃

Humidity

up to 95%

Physical Characteristics

Dimensions

67 x 102 x 27mm

67 x 91 x 27mm

Weight

150g

140g

Table des matières

Autres manuels SC&T Extenseur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manuel utilisateur