SCA 611148 Manuel utilisateur
PLU 611148
4.3" INSPECTION CAMERA
Manufactured & packaged for SRGS PTY LTD ABN 23 113 230 050
6 Coulthards Avenue Strathpine QLD 4500, Australia
INSTRUCTION MANUAL
1. Open the back cover of the battery compartment, insert 4 AA batteries ,Close
the back cover; move the cable to the required length,Press and hold the power
button to turn it on.
Features
Battery
compartment
rear cover
Product User Manual Single Hook
MirrorMagnet
Installation and Use
CONTENTS
Ideal for inspection in small, hard to access spaces where viewing may
be obstructed.
USE DIAGRAM
Playback/Delete
Power on/off
Snapshot/
Record
LED Brightness
Adjustment
Zoom/Color to
Black&White Screen
Brightness
Adjustment
USB Interface
SD Card Slot
• 4.3" LCD screen for easy viewing
• High quality CMOS sensor resolution of 1280*720 pixels
• Video snapshot and recording function (requires SD card - sold separately)
• 40° camera angle
• 5.2mm IP67 waterproof camera
• 1 Meter flexible tube
• 40° Camera angle
• Operation temperature: -10-50°C
• 4 x AA Batteries included
• Hook, magnet and mirror accessories
1
21
PLU 611148
4.3" INSPECTION CAMERA
INSTRUCTION MANUAL
3. On/Off:
1. Power on: Press and hold the power button until the screen lights up.
2. Shutdown: Press and hold the power button until the screen is off.
4. Short press for snapshot. Long press to record.
Snapshot/Record
6. Short press the screen adjustment button to adjust the screen brightness.
After the screen reaches the maximum brightness, press again to restore.
Power display
Power button
Screen brightness adjustment
2. Accessory Installation
Slide an attachment over the base of the camera (see figure below).
Over the base of the camera, gently squeeze the black mounting
module at the bottom of the attachment until hooked.
Short press this key to cycle through
picture-in-picture mode, album mode,
and real-time video mode.
Tips: Before recording,
please format your TF
Card on your computer.
When formatting your
card, set the cluster size
to 64KB. The capacity of
the card only supports
2G ~ 32G.
5.Picture-in-picture function.
Long press to delete image or video file
In the picture-in-picture mode or
album mode, short press to play
the video file.
1
43
9. Flip and mirror: Long press to flip and mirror the video.
8. Zoom/Black-white: Short press to zoom 1 times, 1.5 times, 2 times. Long press
to switch to black-white mode.
7. When the light in the environment is weak, press the brightness adjustment
button to adjust the brightness of the lens LED. After the brightness reaches
the maximum , press again to turn off.
Zoom logo
Flip/mirror
Normal Mirror
Normal
Upside Down
Mirror
Upside Down
Attentions
LED brightness adjustment
Short press to zoom and long
press to switch to black-white
Diameter Of Camera Head
Image Sensor
Effective Pixel 1280*720pixels
Waterproof Level IP67
Items Specifications
CAMERA
CMOS
φ5.2mm
Display Size
Screen Resolution
Interface Micro USB
Power Supply 4AA Batteries
480(RGB)*272
4.3" TFT LCD monitor
Power consumption 360mA（MAX）
Operation Temperature –10～+50℃
Storage Temperature -20～+60℃
MONITOR
Photo Format .JPG
Video Format .AVI
Image Zoom 2x variable digital zoom
15%～85%RH
Operation Humidity
SD card support capacity 2~32G
Screen brightness adjustment
1. Pay attention to the protection of the camera lens ensuring that it does not get bent or folded with
force causing breakage.
2. Note. The camera tube is IP67 waterproof. The receiver is not and therefor should be kept free
from water and moisture.
3 Remove batteries from product when not in use.
SpecificationsItems
65
Autres manuels SCA Appareil photo numérique
