6
• DisEqc type & Input: If we select diseqc1.0/1.1, we can press AB key to set
the port number. If select Unicable, we can press AB key to select IF Chan-
nel, and use YZ key to input Center Frequency.
• LNB Power: press AB key to switch LNB power on /o.
When all of settings are ok, press RETURN , then press OK for save the edit.
3.2 SIGNAL SCAN
Move the cursor to SAT, we can press AB key
into satellite list, then press YZ key to select
satellite you want.
Move the cursor to F, we can press AB key into
TP list, then press YZ key to select TP
you want. We can also press OK , then use
YZ key to edit TP frequency.
Move the cursor to SR, we can press OK , then use YZ key to edit Symbol
rate.
Move the cursor to POL, we can press AB key to change vertical or horizontal
of polarization.
When all of settings are ok, we can check the LNB signal.
3.3 TOOLS
Press YZ key to move the cursor, then press OK
to select the option. Press YZ key to input val-
ue, and press AB key to set east/
west or north/south. The bottom of the screen
can get the parameters of the satellite.
