NAS-20 Quick Installation Guide
m”.
8) Step 6/6: Confirm the settings
Check the setting information and click [Complete].
Click [Back] to revise setting.
5. Add a new user
Basically there is Admin user account. Refer to Chapter 1 in user manual for adding a new user.
6. Add a shared folder
Basically there is a shared folder “public”.
In the folder “public”, there are “music” folder (comes to seem from iTunes) and “btdownload” folder (used for
BitTorrent client). Refer to Chapter 3 in user manual for adding a shared folder.
7. How to access NAS
If the rebooting is completed ([[READY] LED will turn on or blink.), run Start->All Programs->Sarotech NAS
Navigator-> Sarotech NAS Navigator. You can find your NAS. (IP address is the one that you found in NAS list.)
1) Via Web: Select [Web Admin] or type “http://IP address” at the address window in the web browser. You can
find the web page.
2) Via Windows Explorer: Select [Shared Folder]. Or type “http://IP address” at the address window in the window
explorer. You can find the shared folder list.
3) Via FTP: Select [FTP Connection]. Enter User ID and Password to connect in the logon window. ( But Internet
Explorer is not a FTP program basically. You can connect to only user account folder. )
We recommend you to use general FTP program. Please refer to User manual for details.
※ Notice : Please follow NAS turn off steps.
To turn off your NAS, connect to admin account in web browser and click [Control Panel]->[System]->[Turn off
Server]. Turn power off after 10secs.
Do not turn off a NAS while using your NAS through the Network. If the user turn power switch off or remove
power cable while using a NAS through the Network, it may cause loss of data or malfunction of hard disk drive.
Please follow above steps.
FAQ
1. How to install in the MAC OS or Linux:
After rebooting is completed([READY] LED will turn on or blink.), you can access NAS by following these methods.
a. Via Web: Enter “http://nas20” in web-browser address bar.
b. Via FTP: Enter “nas20” in FTP client program.
c. Via Windows Explorer: Enter “\\nas20” in address bar.
If the Log-In window does not come out, connect both your NAS and your computer directly and reboot them
respectively. After 3 minutes when READY LED is ON, enter http://169.254.1.1 in web-browser address bar.
Sarotech Co., Ltd.
- 7 -
