Saris Bones EX 803 Manuel utilisateur
28749A BonesEX.indd 2 2/7/2020 2:38:34 PM
LONG FOR THE RIDE
Just as no garage is complete without a bicycle, at Saris, we believe no car is
complete without a bike rack.
Since setting off on this journey nearly 30 years ago, Saris racks
have freed millions of bike-lovers to explore new territory and terrain,
take part in group rides, bike pool to races, and commute to and
from work.
And we continue to do so in style.
As the all-time #1 best-selling bike rack, Saris Bones® continues to set the
standard for excellence in design. Today all Saris bicycle racks are intuitive to
load and secure, and guaranteed for life.
Built by cyclists for cyclists in Madison, Wisconsin,
we strive to create the world’s best bike racks.
Because cycling is what we live for.
MADE IN USA
3-bike shown
28749A BonesEX.indd 3 2/7/2020 2:38:37 PM
Specifications: Bones EX
Max = 35 lbs/16kg
Máx.= 16kg (35 libras)
Max = 35lb/16kg
Max = 105 lbs/48kg
Máx.= 48kg (105 libras)
Max = 105lb/48kg
3
BIKE
Fit
Guide
Max = 35 lbs/16kg
Máx.= 16kg (35 libras)
Max = 35lb/16kg
2
BIKE
Max = 70 lbs | 32 kg
Máx.= 32kg (70 libras)
Max = 70 lbs | 32 kg
28749A BonesEX.indd 4 2/7/2020 2:38:38 PM
Optional Accessories:
#3037, 3040
Bike Beam
#3035
Hatch Huggers
#3033
Wheel Straps
#3050
Trunk Rack Lock
*The Bike Beam is recommended if bike wheels are not paralell to the ground or if wheels are less than 12” from the ground.
*
28749A BonesEX.indd 5 2/7/2020 2:38:38 PM
RACK ORIENTATION
Bones EX can be confi gured for different vehicle types, as shown.
28749A BonesEX.indd 6 2/7/2020 2:38:38 PM
1
OPENING RACK
Turn knob on rack arm counterclockwise to loosen rack arm. Slide arm to center of aluminum tube and open arms as shown, slide arm back over aluminum tube
spline. Tighten knob by turning clockwise.
x 2
28749A BonesEX.indd 7 2/7/2020 2:38:38 PM
2
Turn knob counterclockwise on outer leg knob to loosen leg as shown. Remove leg from spline and reinstall on spline at desired position. Refer to page 6 to
determine optimal rack orientation. Tighten knob.
SETTING LEG POSITION
x 2
2
2
2
2
2
2
28749A BonesEX.indd 8 2/7/2020 2:38:39 PM
3
Place lower rack feet on bumper. Some vehicles require the feet to be on the trunk lid, refer to website fi t guide for proper feet placement on your vehicle. Place upper feet
in center of trunk lid or center of rear window. Raise rack arms as shown. Note: bike cradles furthest from vehicle should be highest from the ground.
POSITIONING ON VEHICLE
28749A BonesEX.indd 9 2/7/2020 2:38:39 PM
4
Install rack hooks in locations as shown. Hooks are labeled upper, side and lower. Upper hook straps can route through channels in upper legs. Reference
fit guide on website for recommended upper leg strap position. Tie off all straps as shown once thoroughly tightened.
ATTACHING STRAPS
x 6
A
C
B
AA
B
C
C
B
x 2
x 2
x 2
28749A BonesEX.indd 10 2/7/2020 2:38:39 PM
Autres manuels pour Bones EX 803
1
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Saris Accessoires pour vélos
Saris
Saris 4640 Manuel utilisateur
Saris
Saris 882 Manuel utilisateur
Saris
Saris 4412F Manuel utilisateur
Saris
Saris Cycle-On Pro Manuel utilisateur
Saris
Saris 801 Manuel utilisateur
Saris
Saris ELECTRIC BIKE PUMP Manuel
Saris
Saris Bones EX Manuel utilisateur
Saris
Saris 4430 Manuel utilisateur
Saris
Saris 911 Manuel utilisateur
