Sargent ASSA ABLOY Simpli R8200 Series Manuel utilisateur
1-800-727-5477 • www.sargentlock.com A8030D 02/20
Copyright © 2010, 2020, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information
go to www.P65warnings.ca.gov.
Installation Instructions
Warnings & Notes
All trim components shown will vary by function
number Trim one-side functions - refer to instruction
sheet A8031
Screw Pack with screws for lockbody, fronts and strike
screws (part #77-4236)
Trim both side pack includes inside mounting plate
assembly, spindle, through-bolt screws and set screw
Trim one side pack includes inside mounting plate
assembly, spindle, through-bolt screws, set screw and
trim one side plate
R8200 Series
Simpli™ Roseless Trim
Mortise Lock
R8200 Series with Simpli™ Roseless Trim
Installation Instructions
Mortise Lock
2
A8030D 02/20
Copyright © 2010, 2020, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
7
4
6
5
1
3
2
14
13
12
10
9
11
17
15
16
8
Part No Description Req.
1 82-0371 Spindle 2
2 82-4675 Mounting plate assembly 1
3 01-9376 #8-32 x 5/8 machine screw with #6 head 2
4 82-1038 Handle screw 1
5 - Lever base 2
6 82-0347 Spindle spring 2
7 - Inside lever 1
8 - Outside lever 1
9 - Lockbody (various functions) 1
10 01-1019 Machine screw #12-24 x 1/2" 2
11 01-2299 Wood screw #12 x 1-1/4" 2
12 - Outside front plate, varies by function 1
13 01-1028 Front screw #8-32 x 1/4" 2
14 - Turn lever pack - 130kb 1
15 - Cylinder collar/rosette (size varies) 1KB (or
larger) 1
16 - Cylinder (various key systems) 1
17 - 184 x design emergency release assembly 1
• Phillips screwdriver
• T20 Torx
• Lever base tool (provided)
Tools Required
1 Parts List
Figure 1 Parts
R8200 Series with Simpli™ Roseless Trim
Installation Instructions
Mortise Lock
3
A8030D 02/20
Copyright © 2010, 2020, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
IMPORTANT:
Check template A4647 to prep door for
function holes, size and location. Verify
strike location according to template.
Clean out door pocket and door edge of
any debris. Make sure handing of lock
(latch and locking piece) match handing
of door.
NOTE: Keep door open during installation.
1. Slide lockbody into door. (Figure 2)
2. Slide outside lever assembly through
door and lockbody and hold.
(Figure 2)
3. Insert spindle into lockbody hub.
(Figure 3)
Inside of
Door
Outside of
Door
RHR Door Shown
Inside of
Door
Spindle
1. Slide inside adapter over spindle. Verify
threaded hole in adapter faces hinge.
(Figure 4)
2. Sliding cylinder through spring and
collar, thread into lockbody until ush
with collar. Verify logo is straight and at
top. (Figure 5)
3. Secure cylinder in lockbody using
access hole just above deadbolt
opening. (Figure 6)
Latchbolt
Inside of
Door
Threaded Hole
Outside of
Door
Outside of
Door
2 Install Lockbody, Outside Lever Assembly and Spindle
3 Install Inside Adapter and Cylinder
Figure 2 Parts
Figure 3 Pxxx
Figure 4 Pxxx
Figure 5 Pxxx Figure 6 Pxxx
R8200 Series with Simpli™ Roseless Trim
Installation Instructions
Mortise Lock
4
A8030D 02/20
Copyright © 2010, 2020, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
1. Secure lockbody in door with two (2)
wood screws #12 x 1-1/4" or two (2)
#12-24 x 1/2" machine screws.
(Figure 7)
2. Attach collar to adapter by rotating
clockwise using tool supplied.
Assemble ush with door. (Figure 7)
3. Slide lever over spindle and adapter.
(Figure 8)
4. Secure with set screw. (Figure 9)
1. Attach outside front with two (2)
#8-32 x 1/4" at head screws.
(Figure 10)
2. Position and secure strike in frame
with screws provided.
3. Test lock function, both levers and
cylinder prior to closing door.
Outside
of Door
Inside of
Door
Inside of
Door
Lockbody Screws
Inside of
Door
4 Secure Lockbody. Attach Collar. Install Inside Lever.
5 Install Strike Plate and Strike. Test Operation.
Figure 7 Pxxx
Figure 8 Pxxx
Figure 9 Pxxx
Figure 10 a
R8200 Series with Simpli™ Roseless Trim
Installation Instructions
Mortise Lock
5
A8030D 02/20
Copyright © 2010, 2020, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
How to Change Function of Lock:
Green catch screw must be located as
designated on lock case to create desired
function. (Figure11)
Three (3) locations:
• 05, 37 and 38 function (15 function in
unlocked position)
• 04, 06, 13 and 31 functions
• 36 function
NOTE: When moving green catch screw to 04,
06, 13 and 31 functions, hub position must be at
45° as shown on lock case.
*See How to Change Hand of Lock, page 7.
#41 Cylinder is standard for both single and
double cylinder functions for 1-3/4" thick door.
NOTE: Trim one-side functions always require an
inside trim assembly which can be used on inside
or outside of door.
36
05
37
38
04 06 13 31
CHECK HUB
HUB
Items Needed To Create Function
Function Outside
Lever
Inside
Lever
Trim
One
Side
Kit
Outside
Cylinder
Inside
Cylinder
Thumb
Turn
04 X X X
05 X X X X
06 X X X
13 X X
15 X X
31 X X X
36 X X X
37 X X X
38 X X X X
Green Catch Screw
6 8200 Multi-function Options (04, 05, 06, 13, 31, 36, 37, 38)
Figure 9 Pxxx
Figure 11 Pxxx
R8200 Series with Simpli™ Roseless Trim
Installation Instructions
Mortise Lock
6
A8030D 02/20
Copyright © 2010, 2020, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
57/58
NOTE: Shaded levers are rigid at all times
7 R8200 Series Function List
R8200 Series with Simpli™ Roseless Trim
Installation Instructions
Mortise Lock
7
A8030D 02/20
Copyright © 2010, 2020, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
NOTE: Red surface of locking piece must face
secure (keyed/locked) side of door.
To rotate locking piece:
1. Position lockbody with red surface of locking
piece visible. (Figure 12)
2. Insert blade type screwdriver into locking piece
slot to rotate locking piece.
3. Push locking piece toward back of lockbody
and rotate 180° until RED surface shows on
opposite side.
IMPORTANT:
04, 06, 13 and 31 functions require:
1. Remove green catch screw.
2. Rotate hub 45° to vertical position.
3. Rotate locking piece for required hand.
NOTE: Red surface faces locked side of door.
4. Rotate hub to original 45° position as shown
on lock case.
5. Reinstall green catch screw.
NOTE: Beveled surface of latch must face strike.
Deadlatch is self adjusting.
To change hand of latch:
1. Insert at blade screwdriver into spade shaped
slot. (Figure 13)
2. Rotate screwdriver 90º to push latch out until
back of latch clears lock front.
3. Rotate latch 180º. Latch will re-enter lockbody.
(Figure 14)
NOTE: Latch cannot be unscrewed.
Locking Piece Slot RED Surface
Spade Shaped Slot
Lockbody Front
Latch
8 How to Change Hand of Lockbody
Figure 12 Pxxx
Figure 13 Pxxx
Figure 14 Pxxx
Founded in the early 1800s, SARGENT®is a market leader in locksets, cylinders, door closers, exit
devices, electro-mechanical products and access control systems for new construction, renovation,
and replacement applications. The company’s customer base includes commercial construction,
institutional, and industrial markets.
Copyright © 2010, 2020, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited..
SARGENT Manufacturing Company
100 Sargent Drive
New Haven, CT 06511 USA
800-727-5477
www.sargentlock.com
A8030D
02/20
Table des matières
Autres manuels Sargent Verrouillage
Sargent
Sargent ASSA ABLOY Harmony Series Manuel utilisateur
Sargent
Sargent ASSA ABLOY IN Series Manuel utilisateur
Sargent
Sargent Profile Series Manuel utilisateur
Sargent
Sargent ASSA ABLOY FM7100 Series Manuel utilisateur
Sargent
Sargent 7800 Manuel utilisateur
Sargent
Sargent ASSA ABLOY IDP-H1 Manuel utilisateur
Sargent
Sargent ASSA ABLOY SN Series Manuel utilisateur
Sargent
Sargent Degree DG-2 Manuel utilisateur
Sargent
Sargent Assa Abloy 9900 Manuel utilisateur
Sargent
Sargent 7800 Series Manuel utilisateur
Sargent
Sargent IN100 Manuel utilisateur
Sargent
Sargent IN220 Manuel de service
Sargent
Sargent IN100 Manuel utilisateur
Sargent
Sargent IN220 Manuel utilisateur
Sargent
Sargent v.G1.5 Manuel utilisateur
Sargent
Sargent PASSPORT 1000 Exit Device Manuel utilisateur
Sargent
Sargent GX Series Manuel utilisateur
Sargent
Sargent RDL Manuel utilisateur
Sargent
Sargent Assa Abloy IN120 Manuel utilisateur
Sargent
Sargent Profile Series v.S2 Manuel utilisateur
