Sangean PR-D5 Manuel utilisateur

381QD01-A

PR-D5

Operating instruction

Mode d’emploi

Instruccions de manejo

Gebruiksaanwijzing

Bedienungsanleitung

AM/FM-RDS

PortableDigital Tuning Radio

AM/FM-RDS

Radiodigitaleportable

AM/FM-RDS

Radio SintonizadoraDigital Portatil

AM/FM-RDS

Draagbare Digitale Radio

AM/FM-RDS

TragbaresDigitalradio

Important safety instructions

1. Read and understand all safety and operating instructions

before the radio is operated.

2. Retain instruction: The safety and operating instructions

should be retained for future reference.

3. Heed warnings.All warnings on the appliance and operating

instructions should be followed.

4. Follow all operations and use instructions.

5. Water and moisture: The appliance should not be used near

water. Do not use near a bathtub, washbowl, laundry tub,

kitchen sink, wet basement, swimming pool, etc.

6. Unplug the radio from theAC power outlet before cleaning.

Use only a damp cloth for cleaning the exterior of the radio.

7. Do not place the radio on an unstable cart, stand, bracket or

table. The radio may fall, causing serious personal injury and

damage to the radio.

8. Ventilation: This radio should be situated so that its location

or position does not interfere with its proper ventilation.

For example, the radio should not be used on a bed, sofa,

rug or other soft surfaces that may block the ventilation

openings. It should not be placed in a built-in situation

like a cabinet that may reduce air flow through the

ventilation openings.

9. Power sources: The radio should be operated only from the

type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home, consult your

radio dealer or power company.

10. Power cords: The power cord should be positioned so it is not

walked on, pinched, or items placed on top of it. Pay particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the unit. Unplug the power cord by

gripping the power plug, not the cord. Operate the radio using

only the current type of power source indicated. If you are not

sure of the type of power supply to your home, consult your

dealer or local power company.

11.Do not overload wall outlets or extension cords. This can result

in a risk of fire or electrical shock. Never insert objects of any

kind into the radio through opening. The objects may touch

dangerous voltage points or short out parts. This could cause

a fire or electrical shock.

12. If the radio is left attended and unused for long periods of time,

unplug it form the wall outlet. This will prevent damage caused

by lightning or power line surges.

13. If the radio is left unattended and unused for a long period of

time, remove the batteries. The batteries may leak and damage

furniture of your radio.

14. Do not attempt to service the receiver yourself. Removing the

cover may expose you to dangerous voltage, and will void the

warranty. Refer all servicing to authorized service personnel.

15. Object and Liquid Entry-Never push objects of any kind into this

radio through opening as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric

shock. Never spill liquid of any kind of product.

16. The appliance should be serviced by qualified service personnel

when:

The power supply cord or the plug has been damaged.

Objects have fallen or liquid had been spilled into the radio.

The radio has been exposed to rain or water.

The radio does not appear to operate normally or exhibits a

marked change in performance.

The radio has been dropped, or the enclosure damaged.

Controls

Power button

AUX In signal

Band and Tuning step selection

Alarm set

CT Display

LCD display

Tuning/SET/AUTO SEEK knob

Volume Control

Preset buttons

FM Stereo/Mono switch

AUX IN socket

Earphone socket

DC input socket

Antenna

Battery compartment

LCD Display

Battery power

Stereo display

RDS display

Sleep and snooze status

Time set

Alarm display

Digital display

Setting the clock

1. Clock can be set either the radio is power on or off.

2. Press the SET knob (on the side of the radio) for more than

2 seconds, display will flash time set symbol and also the

hour digits, followed by a beep.

3. Rotate the SET knob to set the required hours.

4. Press the SET knob, the minute digits will flash.

5. Rotate the SET knob to set the required minute.

6. Press the SET knob to complete time setting.

Or press POWER.

Operating the radio

Tuning the radio

1. Press the Power button to turn on the radio.

2. Select the required waveband by pressing the Band button.

There are 3 bands which are FM, AM and AUX-IN.

3. Rotate the Tuning knob to the desired frequency, shown in

the display.

4. Or, press the TUNING button to seek for the next available

station.

5. Rotate the Volume knob (on the side of the radio) to get required

sound level.

6. To turn off the radio, press the Power button.

Storing station presets

There are 5 memory presets for each waveband –

STATION PRESETS 1 to 5.

1. Press the Power button to turn on the radio.

2. Tune to required station using one of the methods previously

described.

3. Press and hold the required preset until the radio beeps.

The preset number will appear in the display (such as: )

and the station will be stored under chosen preset button.

4. Repeat this procedure for the remaining presets.

5. Stations stored in preset memories can be overwritten by

following above procedures.

Recalling stations presets

1. Press the Power button to turn on the radio.

2. Select the required waveband.

3. Momentarily press the required Preset button, the preset

number and station frequency will appear in the display.

RDS function

This function only applies when FM station which is listening

provides the RDS service.

1. When FM station provides RDS service, shows on the

display and the display shows the program type and then

shows the radio text if radio text is provided.

2. Press and hold CT button for more than 2 seconds until it beeps,

then the radio clock time will be automatically corrected. When it

shows “No CT” means there is no service.

AUX IN

1. Turn on the radio, and press the STEP/BANDbutton until “AUX”

is displayed.

2. Connect a stereo or mono audio source (ie iPod, MP3 or

CD player) to theAux in socket on the side of the radio.

And theAUX-IN light will be on.

3. Adjust the Volume control on your iPod, MP3 or CD player.

Setting the radio alarm

1. To activate the alarm, press and hold the ALARM button for

more than 2 seconds and it will beep and the display will

show “ALARM”.

2. To deactivate the alarm, press and hold the ALARM button for

more than 2 seconds and it will beep and the “ALARM” will

disappear from the display.

When the radio alarm is selected, the radio will turn on and play

the last played radio station at the chosen alarm time. (If it is under

AUX band, or the battery is low, then the alarm will sound by

buzzer). The radio alarm will continue for one hour unless turned

off by pressing the Power button.

Setting radio alarm time

The alarm time may be set after the clock time is set. The alarm

can be set either radio is on or off.

1. Press theALARM button, the radio alarm symbol will flash,

and the alarm time is shown.

2. During radio alarm flashing, press the SET knob for more

than 2 seconds followed by a beep tone, and the hour digits

will flash.

3. Rotate the SET knob to select the hour then press the SET knob

to confirm hour setting, and the minute digits will flash.

4. Rotate the SET knob to select the minute then press the

SET knob to finish setting.

5. Tune into the desired radio station and adjust the volume for the

alarm, and turn off the radio.

6. While the alarm is sounding, press the POWER button to stop it.

Sleep function

The sleep timer switches off the radio after a preset time

has elapsed.

1. Press and continue to hold down the Power button for more than

2 seconds, followed by beep tone, the display will cycle through

the available sleep times in the order 60-45-30-15-120-90-60.

Release the Power button when the required sleep time appears

on the display. The symbol will appear on the display and

the radio will play the last station selected.

2. To cancel the sleep function, press the POWER button, and the

symbol will disappear and radio is off.

Setting tuning step

Why setting tuning step?

There are different tuning steps for different countries. If you buy

the radio in Europe and intend to use it inAmerica, includes Latin

America, the tuning step should be switched.

1. When radio is off, long press the STEP/BAND button until it

beeps and “24 HOUR” flashes. Then rotate the TUNING knob

to switch 24/12 hour system.

2. Press the STEP/BANDbutton and then rotate the TUNINGknob

to switch MW (AM) step which is MW 9KHz or MW 10 KHz.

(10K for America and 9K for most other countries)

3. Press the STEP/BAND button to finish the setting.

Note:

After the tuning step is switched, AM station presets are erased.

FM Stereo/Mono mode

1. FM Stereo/Mono mode switch is on the side of the radio.

2. When FM signal is weak, some hiss may be audible. To reduce

the hiss, switch the Stereo/Mono to Mono mode.

Headphone socket

A3.5mm headphone socket located on the left-hand side of your

radio. That is to provide for either headphones or an earpiece.

Inserting a plug automatically mutes the internal speaker.

Reset the radio

When this device been attach by static electricity, the display

may show random codes ( meaningless characters ). To retrieve it,

unplug the power and take out the batteries for more than

3 minutes, the display will be back to the normal.

Autres manuels pour PR-D5

Table des matières

Langues :

Autres manuels Sangean Radio

Sangean

Sangean RCR-8WF Manuel utilisateur

Sangean

Sangean PR-D12BT Manuel utilisateur

Sangean

Sangean SR-32 Manuel utilisateur

Sangean

Sangean DPR-99 Plus Manuel utilisateur

Sangean

Sangean WFR-20 Manuel utilisateur

Sangean

Sangean DPR-65 Manuel utilisateur

Sangean

Sangean WR-1 Manuel utilisateur

Sangean

Sangean dpr-202bt Manuel utilisateur

Sangean

Sangean WR-2CL Manuel utilisateur

Sangean

Sangean DPR-67 Manuel utilisateur

Sangean

Sangean DDR-63 - PRODUCT DESCRIPTION Manuel utilisateur

Sangean

Sangean DDR-63 - WIFI INTERNET RADIO-TUNERS Guide de l'utilisateur

Sangean

Sangean HDR-1 Manuel utilisateur

Sangean

Sangean DT-140 Manuel utilisateur

Sangean

Sangean DAB+BOX Manuel utilisateur

Sangean

Sangean PT-633 Manuel utilisateur

Sangean

Sangean DPR-99 Plus Manuel utilisateur

Sangean

Sangean WR-2CL Manuel utilisateur

Sangean

Sangean EUPHONIC 450 Manuel utilisateur

Sangean

Sangean DPR-45 Manuel utilisateur

Sangean

Sangean Pocket 320 Manuel utilisateur

Sangean

Sangean H201 Manuel utilisateur

Sangean

Sangean POCKET 390 Manuel utilisateur

Sangean

Sangean PR-D1 Manuel utilisateur

Manuels Radio populaires d'autres marques

EisSound

EisSound KBSound iSelect Manuel utilisateur

Midland

Midland 1001LWX Manuel utilisateur

Konig

Konig HAV-SR41 Manuel utilisateur

Roberts

Roberts exprssion Manuel utilisateur

VDigi

VDigi DD3.0 Manuel utilisateur

Radio Shack

Radio Shack 21-1863 Manuel utilisateur

Roberts

Roberts Stream 207 Manuel utilisateur

Sony

Sony Walkman SRF-M97 Manuel utilisateur

Stanley

Stanley FatMax FMC770 Manuel utilisateur

auna

auna DAB-Radio 10026947 Manuel utilisateur

SOUNDMASTER

SOUNDMASTER UR190 Manuel utilisateur

HYT

HYT TC-320 Manuel utilisateur

auna multimedia

auna multimedia Yellowstone 10026851 Manuel utilisateur

B-Tech

B-Tech GMRS-V2 Manuel utilisateur

Weierwei

Weierwei VEV-V8 Manuel utilisateur

SOUNDMASTER

SOUNDMASTER DAB750 Manuel utilisateur

Telefunken

Telefunken TF-1505 Manuel utilisateur

Makita

Makita LXRM03 Manuel utilisateur