Sangean PR-D18 Manuel utilisateur
Version 1
中文
GB
PR-D18
1
GB
Important safety instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not t into your outlet. Consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
2
11.
12.
13.
14.
15.
16.
17.
Only use attachments/accessories specied by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specied by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged. liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
To Reduce the Risk of Fire or Electric Shock, Do not Expose This
Appliance To Rain or Moisture.
The Shock Hazard Marking and Associated Graphical Symbol is
provided on the rear of unit.
Apparatus shall not be exposed to dripping or splashing and no
objects lled with liquids, shall be placed on the apparatus.
4
5
GB
Control
Speaker
Band / step button
Buzzer alarm button
Radio alarm button
Volume up / down button
LCD display
Power / Sleep button
Tuning up / down button
Display / Clock set button
Preset button
Headphone socket
DC jack socket
Battery compartment
Key lock switch
Telescopic aerial
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Icon display
FM/AM indicator
PM indicator
Stereo indicator
Buzzer alarm indicator
Radio alarm indicator
Sleep timer indicator / Snooze indicator
Key lock symbol
Battery indicator
Volume indicator
Preset indicator
Frequency / Clock display
K
J
I
H
G
F
E
D
C
B
A
6
Using the radio for the rst time
Battery operation
1. Remove the battery cover on the rear of the unit by pressing the
catch.
2. Insert four UM-3 (AAsize) batteries into the spaces in the compartment.
3. Take care to ensure all batteries are inserted with correct polarity
as shown on the rear cabinet. Replace the battery cover.
4. Reduced power, distortion, “stuttering sound” and the battery
icon ashing on the display are all signs that the batteries need
replacing.
5. If the radio is not to be used for any extended period of time, it is
recommended that the batteries are removed from the radio.
7
GB
Using the AC power adaptor
The AC power adaptor required for this unit should be 6 volts DC at
0.4 A center pin positive.
Insert the adaptor plug into the DC socket on the left side of the
radio.
Plug the adaptor into a standard mains socket outlet.
Whenever the adaptor is used, the batteries are automatically
disconnected.
The AC adaptor should be disconnected from the main supply when
not in use.
8
Operating your radio - Search tuning AM / FM
1. Fully extend the antenna above the radio. Press the Power button
to switch on your radio.
2. Press the Band button to select the required band.
3. Press and hold the Tuning up/ down button to start the search
tuning. Your radio will scan in an upwards direction (low frequency
to high frequency) or downwards direction (high frequency to low
frequency) and stop automatically when it finds a station of
sufcient strength.
4. To find other stations, press and release the Tuning Up / Down
buttons.
5. Adjust the volume by pressing the Volume up/down button to the
required setting.
Note:
(1) FM stereo is only available when using headphones.
(2) To see time or frequency on the screen, press the Display button.
9
GB
Manual tuning – AM / FM
1. Press the Power button to switch on your radio.
2. Press the Band button to select the required band. Fully extend
the antenna for best reception.
3. Press and release the Tuning up/down button to tune to a station.
The FM frequency will change in steps of 50/100kHz and AM
frequency will change in steps of 9/10kHz.
4. When the waveband end is reached the radio will recommence
tuning from the opposite waveband end.
5. Set the Volume using the Volume Up/Down buttons to the desired
settings.
10
Presetting stations
You may store your preferred AM/FM radio stations to the preset
stations (1 to 5). The procedure for setting preset Stations is
described below.
Note that the radios for AM and FM are saved together in the preset
stations so there are 10 of them. Your preset stations will be
preserved for 30 minutes when there is no power supply from either
the battery or the AC adapter.
1. Press the Power button to switch on your radio.
2. Tune to the required station as previously described.
3. Press and hold the required Preset button (1-5) until you hear a
beep sound and the display shows‘M1’ for example next to the
frequency. The station will be stored using the preset number.
Repeat this procedure for the remaining presets as you wish.
4. Preset stations which have already been stored may be overwritten
by following the above procedure if required.
Autres manuels pour PR-D18
1
Table des matières
Autres manuels Sangean Radio
Sangean
Sangean PR-D9CL Manuel utilisateur
Sangean
Sangean ATS-404 Manuel du propriétaire
Sangean
Sangean ATS-909X2J Manuel utilisateur
Sangean
Sangean DT-250 Manuel utilisateur
Sangean
Sangean PR-D18 Manuel utilisateur
Sangean
Sangean LUNCHBOX LB-100 Manuel utilisateur
Sangean
Sangean DPR-99 Plus Manuel utilisateur
Sangean
Sangean UCR-1000FM Manuel utilisateur
Sangean
Sangean DT-800 Manuel utilisateur
Sangean
Sangean MMR-77 Manuel utilisateur
Sangean
Sangean H201 Manuel utilisateur
Sangean
Sangean HDR-1 Manuel utilisateur
Sangean
Sangean DPR-69+ Manuel utilisateur
Sangean
Sangean PR-D2 Manuel utilisateur
Sangean
Sangean FatBox FB-100 Manuel utilisateur
Sangean
Sangean DT-120 Manuel utilisateur
Sangean
Sangean U5 DBT Manuel utilisateur
Sangean
Sangean dpr-39 Manuel utilisateur
Sangean
Sangean WFR-2D Manuel utilisateur
Sangean
Sangean PT-633 Manuel utilisateur
