SanDisk Cruzer Enterprise Manuel utilisateur
Cruzer Enterprise USB Drive
User Guide
Revision 1.0
Document No. UG-CRE-0507-14
May, 2007
SanDisk Corporation
Corporate Headquarters • 601 McCarthy Blvd. • Milpitas, CA 95035
Phone (408) 801-1000 • Fax (408) 801-8657
www.sandisk.com
Cruzer Enterprise USB Drive User Guide
Revision 1.0
Table of Contents
1. Overview ...........................................................................................................................................3
2. System Requirements.......................................................................................................................3
3. Getting Started .................................................................................................................................4
3.1 Installing the Driver ...................................................................................................................... 4
3.2 Initializing the Device................................................................................................................... 4
4. Using your Cruzer Enterprise USB Drive......................................................................................7
4.1 Logging on to the Cruzer Enterprise USB Drive .......................................................................... 7
4.2 Forgetting Your Password............................................................................................................. 8
4.3 Viewing Your Contact Information .............................................................................................. 9
4.4 Accessing your Cruzer Enterprise USB Drive ............................................................................ 10
4.4.1 Using My Computer to Access the Cruzer Enterprise USB Drive.............................................. 10
4.4.2 Using the Cruzer Enterprise Icon on the System Tray................................................................ 11
4.5 Changing Your Settings.............................................................................................................. 12
4.6 Formatting the Cruzer Enterprise USB Drive ............................................................................. 13
4.7 Getting Online Support ............................................................................................................... 14
4.8 About the Cruzer Enterprise USB Drive..................................................................................... 15
4.9 Removing the Cruzer Enterprise USB Drive .............................................................................. 16
5. Frequently Asked Questions (FAQs)............................................................................................17
© 2007 SanDisk® Corporation 2 May, 2007 Document No. UG-CRE-0507-14
Cruzer Enterprise USB Drive User Guide
Revision 1.0
1. Overview
This document is designed to help you become familiar with the Cruzer Enterprise USB Drive.
Cruzer Enterprise USB Drive offers the following features:
•Cruzer Enterprise USB Drive is 2.0 High Speed compliant and 1.1 Full Speed compatible
•The drive is fully secured using a sophisticated password mechanism
•Cruzer Enterprise USB Drive includes a 256-bit AES hardware-based encryption
•Ultra fast transfer speeds of 24 read / 20 write megabytes per second
The Cruzer Enterprise USB Drive can be managed using the Cruzer Enterprise CMC, a software based
interface that provides corporate networks with security against internal threats and loss of corporate
sensitive data, while securing data residing on corporate issued Cruzer Enterprise USB Drives.
Why Use the Cruzer Enterprise USB Drive?
As with any USB Flash drive, the Cruzer Enterprise USB Drive can be used to store data. However, all
information on the Cruzer Enterprise USB Drive is securely stored and encrypted with a 256-bit AES
hardware based encryption. It is also secured using a sophisticated password protection method. In addition,
the Cruzer Enterprise USB Drive includes a “lockdown” mode for enhanced security. This lockdown feature
will lock the Cruzer Enterprise USB Drive whenever a maximum number of password attempts exceed a
pre-configured value. In the event that the device is locked, the device must be reformatted to enable
operation. All data on the Cruzer Enterprise USB Drive will be erased.
2. System Requirements
The system requirements for the Cruzer Enterprise USB Drive are as follows:
•Pentium III processor
•10 MB free disk space
•USB 1.1 port*(For best performance, it is recommended to use a USB 2.0 port)
•Operating Systems:
oMicrosoft Windows 2000 SP4 and higher
oMicrosoft Windows XP SP1 and higher
oMicrosoft Windows XP 64-bit SP1
oMicrosoft Server 2000
oMicrosoft Server 2003 (Standard and Enterprise Editions)
oMicrosoft Vista (all editions)
Note: For Windows 2000 users without administrative privileges, USB 2.0 port is required.
© 2007 SanDisk® Corporation 3 May, 2007 Document No. UG-CRE-0507-14
Cruzer Enterprise USB Drive User Guide
Revision 1.0
3. Getting Started
3.1 Installing the Driver
To install the Cruzer Enterprise USB Drive driver:
•Insert the Cruzer Enterprise USB Drive into an available USB port. The Found New Hardware message
is displayed indicating the driver installation.
Figure 1: Found New Hardware Message
3.2 Initializing the Device
After the hardware installation is complete, the Setup Wizard will guide you through the initial configuration
of the Cruzer Enterprise USB Drive. The Cruzer Enterprise Startup window appears:
Figure 2: Cruzer Enterprise Startup Window
1. After a few seconds, the Setup Wizard begins. Select the language and click Next to continue.
© 2007 SanDisk® Corporation 4 May, 2007 Document No. UG-CRE-0507-14
Cruzer Enterprise USB Drive User Guide
Revision 1.0
Figure 3: Setup Wizard
2. If the Setup Wizard does not appear automatically, perform the following procedure:
a. Click My Computer.
b. Click the Enterprise drive.
c. Double-click the icon labeled Cruzer Enterprise Launcher to run the Setup Wizard.
3. Read the Software License Agreement carefully. Select Accept if you accept the terms and conditions
of the agreement and click Next.
Figure 4: Software License Agreement
4. During the initial configuration, you must set a device password for data protection. This password
enables the use of the device as a removable storage and protects your Cruzer Enterprise USB Drive
application data and file information. After you select the language, the Password Setup dialog box
appears:
© 2007 SanDisk® Corporation 5 May, 2007 Document No. UG-CRE-0507-14
Cruzer Enterprise USB Drive User Guide
Revision 1.0
Figure 5: Password Setup
The Password Setup dialog box requires you to enter a password and re-enter it for confirmation. The
password must be a minimum of 6 characters and must not exceed 16 characters. It must contain three
different types of characters: lower case letters, upper case letters, numeric digits, or special characters.
Examples of the password are ABC$123 or Bob411. Click Next to set your Cruzer Enterprise USB
Drive password.
Note: A lost password will result in the loss of your data. A password hint can be entered to remind
you of your password. Be sure to give a password hint when prompted.
5. You can optionally type your name and company name in the Contact Information window.
Additionally, you can provide any information to identify your Cruzer Enterprise USB Drive in the
Details section. For example, you can type an “if found” informational message. The contact
information is displayed on the Cruzer Enterprise USB Drive logon window when clicking the Contact
Information link.
Figure 6: Contact Information Window
6. Click Finish to complete the initialization.
© 2007 SanDisk® Corporation 6 May, 2007 Document No. UG-CRE-0507-14
Cruzer Enterprise USB Drive User Guide
Revision 1.0
4. Using your Cruzer Enterprise USB Drive
This section provides you with information on how to use your Cruzer Enterprise USB Drive.
4.1 Logging on to the Cruzer Enterprise USB Drive
After the initializing the device is complete, you can use your Cruzer Enterprise USB Drive anytime. When
you use the device, you are requested to type your password to access the information on the device.
To log on to the Cruzer Enterprise USB Drive:
1. Insert the Cruzer Enterprise USB Drive into an available USB port. The Cruzer Enterprise USB Drive
startup window appears:
Figure 7: Cruzer Enterprise Startup Window
After a few seconds, the Login Device Window appears:
Figure 8: Login Device Window
2. Type your password and click Login to access the data on your Cruzer Enterprise USB Drive.
© 2007 SanDisk® Corporation 7 May, 2007 Document No. UG-CRE-0507-14
Cruzer Enterprise USB Drive User Guide
Revision 1.0
4.2 Forgetting Your Password
If you forgot your password:
1. Click the Forgot Password link. A message is displayed notifying that the drive will be formatted and
data on the drive will be lost. This is to protect your data in case someone else attempts to access the
device. Click OK to proceed with entering a new password on your device or Cancel to return to the
logon screen.
Figure 9: Forgot My Password Message
2. Type your new password and retype the same password in the Password Confirmation box. The
password must be a minimum of 6 characters and must not exceed 16 characters. It must contain three
different types of characters: lower case letters, upper case letters, numeric digits, or special characters.
A password hint can also be entered to remind you of your new password. Click OK.
Figure 10: Forgot Password Window
© 2007 SanDisk® Corporation 8 May, 2007 Document No. UG-CRE-0507-14
Cruzer Enterprise USB Drive User Guide
Revision 1.0
4.3 Viewing Your Contact Information
You can view your contact information by clicking the Contact Information link on the Login Device
Window. The Contact Information window appears:
Figure 11: Contact Information Window
© 2007 SanDisk® Corporation 9 May, 2007 Document No. UG-CRE-0507-14
Cruzer Enterprise USB Drive User Guide
Revision 1.0
4.4 Accessing your Cruzer Enterprise USB Drive
The Cruzer Enterprise USB Drive is divided into two sections:
•Enterprise – a read-only partition that contains tamper-proof system files
•Cruzer Disk – the read/write area for data storage.
After successfully logging on to the Cruzer Enterprise USB Drive, you can access the drive using the
following methods:
•By clicking My Computer and selecting Cruzer Disk
•By clicking the Cruzer Enterprise Drive icon on the system tray
4.4.1 Using My Computer to Access the Cruzer Enterprise USB
Drive
To access the Cruzer Enterprise USB Drive:
3. From the desktop, double-click My Computer.
Figure 12: My Computer Window
4. Double-click Cruzer Disk.
© 2007 SanDisk® Corporation 10 May, 2007 Document No. UG-CRE-0507-14
Autres manuels pour Cruzer Enterprise
4
Table des matières
Autres manuels SanDisk Stockage
SanDisk
SanDisk Cruzer Profile Manuel utilisateur
SanDisk
SanDisk iXpand Manuel utilisateur
SanDisk
SanDisk Connect Manuel utilisateur
SanDisk
SanDisk SSD Manuel d'utilisation et d'entretien
SanDisk
SanDisk iNAND eMMC Manuel utilisateur
SanDisk
SanDisk Memory Stick Micro M2 Manuel utilisateur
SanDisk
SanDisk 80-11-00893 Manuel utilisateur
SanDisk
SanDisk G-RAID MIRROR Manuel utilisateur
SanDisk
SanDisk microSD Manuel utilisateur
SanDisk
SanDisk SSD UATA 5000 1.8" Manuel utilisateur
SanDisk
SanDisk Cruzer USB Flash Drive Manuel utilisateur
SanDisk
SanDisk Connect Manuel utilisateur
SanDisk
SanDisk CompactFlash Manuel utilisateur
SanDisk
SanDisk SSD P4 Manuel utilisateur
SanDisk
SanDisk Cruzer Contour Manuel utilisateur
SanDisk
SanDisk NAND Manuel utilisateur
SanDisk
SanDisk Cruzer Professional Manuel utilisateur
SanDisk
SanDisk SSD Ultra ATA Instructions d'installation
SanDisk
SanDisk ImageMate CompactFlash Manuel utilisateur
SanDisk
SanDisk MobileMate Memory Stick Plus Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur