Samsung SU3330 Manuel utilisateur
Vacuum Cleaner
user manual
English
SU33 SERIES
✻ Before operating this unit, please read the instructions carefully.
✻ For indoor use only.
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
2_ safety information
safety information _3
Safety information
IMPORTANT SAFETY INSTRUCTIONS
Thank you for purchasing a Samsung vacuum cleaner. When
using an electrical appliance, basic precautions should always be
followed, including the following :
PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE
USING THIS VACUUM CLEANER.
WARNING : To reduce the risk of fire, electric shock, or injury.
• Do not leave vacuum cleaner unattended when it is plugged in.
• Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow children to operate vacuum cleaner or use as a toy.
• Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s
recommended attachments.
• Do not use with damaged cord or plug.
• If vacuum cleaner is not working as it should, or has been dropped,
damaged, left outdoors or dropped into water, return it to a service
center.
• Do not pull or carry by cord, use cord as a handle, close a door on
cord, or pull the cord around sharp edges or corners. Keep cord
away from heated surfaces.
• Do not unplug by pulling on the cord. To unplug, grasp the plug, not
the cord.
• Do not handle vacuum cleaner or plug with wet hands.
• Do not put any object into openings. Do not use with any opening
blocked; keep openings free of dust, lint, hair and anything that may
reduce air flow.
• Keep hair, loose clothing, ngers and all parts of body away from
openings and moving parts.
• Do not pick up anything that is burning or smoking, such as
cigarettes, matches or hot ashes.
• Do not use without dirt cup or lters in place. Empty dirt cup and
clean filter frequently when picking up very fine materials such as
powder.
• Turn off all controls before unplugging vacuum cleaner.
• Use extra care when cleaning on stairs.
• Do not use to pick up ammable or combustible materials such as
gasoline or fine wood, fine wood sandings or use in areas where they
may be present.
• Store your vacuum cleaner indoors, in a cool and dry area.
2_ safety information
safety information _3
Safety information
• Avoid picking up hard, sharp objects with the cleaner. They may
damage the cleaner.
• Always turn off this appliance before connecting or disconnecting the
hose, removing the bottom plate for maintenance.
• Use only on dry, indoor surfaces, never change the plug in any way.
• Do not modify the polarized plug to t a non-polarized outlet or
extension cord.
• Do not touch the brush roller when it is rotating.
• Keep suction away from your face when using nozzles and pipe.
• Do not pull the power cord around sharp corners and do not allow it
to be trapped.
• Unplug before connecting turbine nozzle.(only using turbine-brush
model)
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
• The plug must be removed from the socket-outlet before cleaning or
maintaining the appliance.
• If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard.
SAVE THESE INSTRUCTIONS
This vacuum cleaner is intended for household use only.
FOR RESIDENTS OF THE UNITED KINGDOM ONLY
If your appliance is fitted with a nonrewireable BS 1363 plug it must not
be used unless a 13 amp (ASTA approved to BS 1362) fuse is tted in
the carrier contained in the plug. If for any reason the plug is cut off,
it must be disposed of, as it is an electric shock hazard should it be
inserted into a 13 amp socket.
4_ safety information
contents _5
When using the hose attachment, please ensure that vacuum remains flat
and level on the floor surface to prevent contact from the brush roller with the
floor surface. If the vacuum does not remain flat and level, this could result in
damage to the flooring.
To reduce risk of injury and potential damage to floor surface, do not use the
vacuum on a staircase. Always use vacuum from the bottom of the staircase
and ensure that the vacuum remains securely flat on the floor surface.
Safety information
SAFETY INFORMATION
•
Before operating the appliance, please read this manual thoroughly and retain it
for your reference.
•
Because these following operating instructions cover various models, the characteristics
of your vacuum cleaner may differ slightly from those described in this manual.
CAUTION/WARNING SYMBOLS USED
WARNING Indicates that a danger of death or serious injury exists.
CAUTION Indicates that a risk of personal injury or material damage exists.
WARNING
CAUTION
CAUTION
WARNING
4_ safety information
contents _5
ASSEMBLING THE CLEANER
06
06. Product View
07. Attach Handle to Vacuum
07. Attach Dust Bin to Vacuum
07. Attach Vacuum Hose and Tools
OPERATING THE CLEANER
08
08. Power Switch
08. Handle Positions
08. Height Adjustment
08. Transporting Cleaner
09. Special On-Board Tools
09. Power Cord Storage
MAINTENANCE
10
10. Empty Dust Bin
10. Cleaning the Grille
11. Cleaning the Pre-motor Filter
11. Replacing the Post-Motor Filter
12.
Check Rotating Brush and Drive Belt
12. Replace Drive Belt
13. Mini Turbo Brush
TROUBLESHOOTING
14
Contents
6_ assembling the cleaner
Assembling the cleaner
assembling the cleaner _7
Cord Clip
Hose Clip
Stretch
Hose
Crevice
Tool
Extension
Wand
Hose
Wand
Hose
Wand
Base
Quick
Release
Cord
Wrap
Power
Cord
Combination
Dusting Brush/
Upholstery Tool
Power
Switch
Handle
Release
Pedal
Handle
*option
Bracket Brush
(Select Models Only)
*option
Mini Turbo Brush
(Select Models Only)
Carrying
Handle
Grille
Cyclone
Dust Bin
Powerfoot Height
Adjustment
Knob
Post-Motor Filter
(Post-Motor Filter
is located behind
the door.)
PRODUCT VIEW
CAUTION
Do not plug in your vacuum cleaner until you are familiar with all instructions
and operating procedures.
WARNING
Plastic film can be dangerous. To avoid danger of suffocation, keep away from
babies and children.
Lower Cord
Wrap
* Select Models Only
6_ assembling the cleaner
assembling the cleaner _7
01 ASSEMBLING THE CLEANER
Assembling the cleaner
ATTACH HANDLE TO VACUUM
1. Stand the vacuum upright and slide the base of the
handle firmly into the grooves at the top of the
vacuum body.
2. Check to be sure the handle is fitted to the vacuum
body. If there is a gap, continue to push firmly until the
handle is flush.
3. Insert the screw provided from the screw packet into
the existing hole.
Tighten securely with a screwdriver.
ATTACH DUST BIN TO VACUUM
Fit the groove located on the lower
front side of the Dust Bin to the hook
located on the vacuum body and
attach the hook located on the
Dust Bin Handle to the vacuum body
as shown.
ATTACH VACUUM HOSE AND TOOLS
Cord Clip
Hose Clip
4. Attach the Lower Cord Wrap by lining up
the tab on the base with the corresponding
notch on the back of the vacuum and turn it
clockwise as shown.
5. Attach the Extension Wand and the Crevice
Tool together into the holder on the right side
of the body as shown.
6. Attach the Combination Tool into the holder
on the left side of the body as shown.
7. Attach the Bracket Brush on the front of the
handle and clip the Mini Turbo Brush into the
Bracket Brush as shown.
Note:
The vacuum will not operate effectively
unless the Hose Wand is firmly attached.
1. Attach the Twist Snap Hose by lining up the
taps on the base with the corresponding
notches on the back of the vacuum as shown.
2. Turn the Twist Snap Hose clockwise to lock
the hose into place.
3. Grasping the Hose Wand, slide the end of the
it onto the Hose Wand Base. Snap the Hose
into the Hose Clip.
8_ operating the cleaner
Operating the cleaner
operating the cleaner _9
HEIGHT ADJUSTMENT
The Powerfoot/Rotating Floor Brush can be adjusted to clean several oor surfaces.
1. Turn Height Adjustment Knob to desired setting.
Bare floor Setting
– For bare floors.
Medium Settings
– For short and medium pile carpets.
Highest Setting
– For plush pile carpet
Note : For optimal cleaning performance, adjust to the lowest practical setting.
If your cleaner is difficult to push, adjust to the next higher setting.
Always ensure that the correct height setting is used for your flooring type as
damage may occur if the height setting is not changed to reflect your flooring type.
POWER SWITCH
The Power Switch is located on the side of the vacuum.
Push the rocker switch "ON" to vacuum, and "OFF"
when cleaning is complete.
1. Upright
– For storage and above floor cleaning with tools.
2. Normal Cleaning
– Press handle release pedal once. Position used for
most household floor cleaning tasks.
3. Low Cleaning
– With the vacuum in normal cleaning position, press
handle release pedal again. Use for reaching under
low furniture such as tables, chairs or beds.
HANDLE POSITIONS
Press the handle release pedal, located on the lower left side of the vacuum, with
your foot to place your vacuum into one of three cleaning positions.
TRANSPORTING CLEANER
1. To move your cleaner from room
to room, put the Handle in the
upright position, tilt the cleaner
back on its rear wheels and push
forward.
2. The cleaner can also be moved
by using the Carrying Handle located
on the top of the Dust Bin.
Carrying
Handle
8_ operating the cleaner
operating the cleaner _9
02 OPERATING THE CLEANER
Operating the cleaner
*option
Select Models Only
Combination
Dusting Brush/
Upholstery Tool
Crevice
Tool
Extension
Wand
Hose
Wand
Hose
Wand
Base
Quick Release
Cord Wrap
Power Cord
SPECIAL ON-BOARD TOOLS
Your vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile
above floor vacuum cleaner when you select one of the special tools.
1. Raise Handle to Upright Position.
2. Grasp the end of the Hose Wand and lift Hose
Wand to separate from the Hose Wand Base.
3. Attach tools by firmly pushing onto Vacuum Hose
or Extension Wand.
Combination Dusting Brush/Upholstery Tool:
Two Types of cleaning tools are included in one
attachment: rotate for desired tool.
• Use Brush side to dust furniture, blinds, books,
lamps, shelves, and baseboards.
• Use Upholstery side for curtains, draperies,
cushions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachment for a longer reach.
Mini Turbo Brush (Select Models):
Use rotating brush action for small areas such as
stairs and upholstery.
POWER CORD STORAGE
1. To use your vacuum, remove the cord and plug it into an electrical outlet. For your
convenience, there is a quick release cord wrap for easy cord removal.
2. When you are finished cleaning, turn vacuum cleaner off.
3. Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect
from outlet.
4. Loop power cord around cord wraps on the back of the vacuum as shown.
5. Clip molded plug to power cord to secure.
Note: Press gently when using Mini Turbo Brush to gain maximum cleaning. Too
much pressure could cause the brush to stop rotating.
10_ maintenance
Maintenance
maintenance _11
Note: The
Dust Bin
may be washed in warmwater with a mild detergent.
Reassemble and makesure it is completely
dry before using again.
To maintain maximum cleaning performance, the following maintenance
steps must be performed:
1. Empty the Dust Bin when the dirt reaches the “MAX”
line on the side.
2. Cleaning the Grille Cyclone when the Dust Bin
become clogged.
3. Check the Pre-Motor Filter at least once a month and
clean or replace as needed.
4. Replace the Post-Motor Filter every three to six
months.
Note: More frequent filter cleaning or replacing may
be necessary if you are vacuuming new carpet,
fine dust, or have allergy concerns. Follow the
instructions on the following pages to perform
these simple maintenance steps.
EMPTY DUST BIN
The Dust Bin needs to be emptied when the dirt reaches the “MAX” line on the
side of it.
1. Unplug cleaner from electrical outlet.
2.
To remove the
Dust Bin
from the vacuum body, push the
Dust Bin
release button as shown.
3. Hold dust bin and push down bin release empty button to empty
dirt into garbage container as shown.
WARNING
To reduce the risk of electronic
shock, turn Power Switch OFF
and disconnect polarized plug
from electrical outlet before
performing maintenance or
troubleshooting checks.
Tip:
For maximum cleaning
performance, check and
clean or replace all filters as
suggestsd.
CLEANING THE GRILLE
If the suction is weak although the dust bin is empty, open the cover and clean the Grille.
Note:
Whenever the Grille is clogged, check the pre-motor filter and clear it.
Grille
Cyclone
Ce manuel convient aux modèles suivants
9
Table des matières
Autres manuels Samsung Aspirateur
Samsung
Samsung SC06H70 H Series Manuel utilisateur
Samsung
Samsung Vacuum cleaner Manuel utilisateur
Samsung
Samsung VS20A95 Series Manuel utilisateur
Samsung
Samsung Jet Bot VR30T85 Series Manuel utilisateur
Samsung
Samsung POWERbot SR2 M70 Series Manuel utilisateur
Samsung
Samsung SC478 Series Manuel utilisateur
Samsung
Samsung SC88 series Manuel utilisateur
Samsung
Samsung SC07M25E0WB Manuel utilisateur
Samsung
Samsung SC07K51 Series Manuel utilisateur
Samsung
Samsung VC-5814 Manuel utilisateur
Samsung
Samsung SR8987 Manuel utilisateur
Samsung
Samsung VAS-2490R Manuel utilisateur
Samsung
Samsung SC07H8150H Series Manuel utilisateur
Samsung
Samsung VAS-2690R Manuel utilisateur
Samsung
Samsung SC12F70 Series Manuel utilisateur
Samsung
Samsung SC6200 SERIES Manuel utilisateur
Samsung
Samsung VC-8918V Manuel utilisateur
Samsung
Samsung VAC6013R Manuel utilisateur
Samsung
Samsung VC-RA84V Series Manuel utilisateur
Samsung
Samsung VR20T6001M Series Manuel utilisateur
