Samsung Galaxy SmartTag2 Manuel utilisateur

www.samsung.com

USER MANUAL

10/2023. Rev.1.0

EI-T5600

Galaxy SmartTag2

Getting started

About Galaxy SmartTag2

The Galaxy SmartTag2is a product that can be attached to pets or objects in order to

prevent their loss and to stay updated on their location. You can also launch automation

features through the product using its button.

Connect a product to your mobile device through the SmartThings app to check the

location of the product and get information about where the product was lost.

Device layout

Strap connection

hole

Button

Speaker

Battery tray

Battery tray hole

English

Getting started

Button

Button Function

Button

•

Press to turn off the product alerts notification sound

when it rings.

•

Press twice to find the mobile device connected to the

product.

•

Press or press and hold to launch the automation feature

you set.

Replacing a battery

1 Insert the ejection pin supplied with the product ora clip into the battery tray hole,

and pull out the battery tray gently from the battery tray slot.

2 Insert the batterywith the positive terminal properly aligned with the + symbol

inside the product.

English

Getting started

3 Insert the battery tray back into the battery tray slot.

•

Be careful not to hurt yourfinger or fingernail when pulling out the battery tray

from the battery tray slot to replace the battery.

•

Be careful not to insert the battery tray upside down as it may damage the

product.

•

Check the direction of the battery’s positive (+) terminal. If the battery is

incorrectly inserted, the product will not work.

•

When the battery is discharged, replace the battery.

•

Do not recharge the provided battery.

Before using the product

Installing the SmartThings app on yourmobile device

Before using a product, you should install the SmartThings app on your mobile device.

Depending on your mobile device, you can download the SmartThings app from the

following places:

•

Samsung Android mobile devices:

Galaxy Store

Play Store

•

You cannot install the SmartThings app on mobile devices that do not support

products syncing. Ensure that your mobile device is compatible with the

products.

•

You must registerand sign in to your Samsung account to use the SmartThings

app.

English

Getting started

Connecting products to a mobile device

1 Open the

SmartThings

app on your mobile device.

Update the SmartThings app to the latest version.

2 Remove the film between the battery tray and the battery, or insert the battery.

Alternatively, press the product’s button.

The product will make a sound and be activated.

3 When the pop-up window informing that your product is detected appears on your

mobile device, tap

Add

If the connection pop-up window does not appear, tap

Devices

→

. Tap

Add

under

Samsung devices

and tap

Tag/Tracker

4 Follow the on-screen instructions to complete the connection.

When the connection is complete, the tag’s current location will be displayed on

the

SmartThings Find

map and the product will appear on the list of devices in the

SmartThings app.

Connecting products by scanning the QR code

You can also connect a product to your mobile device by scanning its QR code.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Devices

→

Scan QR code

to scan the QR code on the box.

3 Follow the on-screen instructions to complete the connection.

When the connection is complete, the tag’s current location will be displayed on

the

SmartThings Find

map and the product will appear on the list of devices in the

SmartThings app.

•

If you are registering a product for the first time, the registration process may

not be smooth depending on the surrounding environment. You may have to try

2-3 times before successfully completing registration.

•

Supported features may differ depending on the mobile device and software

version.

•

You can use SmartThings Find only on Samsung mobile devices that run Android

9.0 or later, as well as Samsung mobile devices that support the Find My Mobile

feature.

•

The product is a wireless communication device, and performance may be

degraded when multiple devices are connected simultaneously.

English

Using the product

Checking a product’s location

You can remotely check your product’s location from the SmartThings app on your

mobile device and find its location by triggering a notification sound on the product.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Devices

, tap your product card, and then tap

View map

. Alternatively, tap

Life

→

Find

The current location of the product will be displayed on the map.

•

The location of the product is based on GPS and Wi-Fi positioning results of

the mobile device connected to the product or the nearby Android mobile

device, which may have some problems because of things like the surrounding

environment or GPS failure.

•

If the current location of the product does not appear, the product’s battery

has been discharged or there is no Samsung Android mobile devices nearby to

help locate the product. To receive notifications when your product’s location

information is updated, turn on the related feature. Refer to Notify me when it’s

found for more information.

•

When the product’s status is

Connected

, you can triggera notification sound or

adjust the volume of the product.

•

The product’s usage time mayvary depending on the user’s environment and

the usage pattern.

•

The Ultra-Wideband (UWB) feature may not be available depending on the

region.

English

Using the product

Product location

More options

List of devices to display on the

map

Current location of mobile device

Detailed location information and

access additional options

Searching forthe product location with a notification sound

You can find the product’s location by triggering a notification sound.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Life

→

Find

3 Tap

Ring

The product alerts notification will sound.

To adjust the notification sound’s volume, tap or .

To turn off the notification sound, tap

Stop

or press the product’s button once.

Searching forthe product location by history

You can find a product byviewing the location of the product recorded for last 7 days.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Life

→

Find

→

Location history

To delete the product’s entire location history, tap

→

Delete history

English

Using the product

Searching forthe product location by signal strength

You can find the product’s location by detecting its signal strength.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Life

→

Find

→

Search nearby

The signal screen of the product you are trying to find will appear. The closeryou are

to the location of the product you are trying to find, the strongerthe signal strength

indicated on the screen will be.

You can triggerthe product’s notification sound by tapping .

To turn off the notification sound, tap .You can also turn off notifications by pressing

the product’s button once.

Searching forthe product location with the AR effect

You can find the product’s location by using AR related features.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Life

→

Find

→

Search nearby

→

3 Scan the nearby area.

If your product is nearby, the AR effect will appear in the location of the product you

are looking for.

You can triggerthe product’s notification sound by tapping .

This feature is only available when yourmobile device supports the UWB feature.

Searching forthe shared product locations

You can invite multiple users to your place where the product is registered to share the

product’s location and control it together. If you cannot use your mobile device, try to

locate and control the product on another user’s mobile device.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Life

→

Find

→

Share this device’s location

3 Follow the on-screen instructions to invite otherusers to your location.

4 When the user invitation is complete, follow the on-screen instructions to share the

product’s location.

English

Using the product

Getting product location guidance

Getting route guidance

If your product is lost orfar away from you, you may be directed to the location where the

product is located.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Life

→

Find

→

Navigate

Directions to the place where the product is located will begin.

If a supported navigation app is not installed on your mobile device, the list of

supported navigation apps will appear. Install the app you want from the list and

get directions.

Notify me when it’s found

You can receive a notification on your mobile device when the product’s location

information is updated, even if the product’s battery is completely discharged or there is

no Samsung Android mobile device nearby to help you locate the product.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Life

→

Find

→

Notify me when it’s found

to turn on the feature.

This feature is available when the product and mobile device are not connected.

Getting notified when the product is left behind

You can receive a notification on your mobile device when the product is left behind.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Life

→

Find

→

Notifywhen left behind

and tap the switch to turn it on.

You can set a safe location to avoid notifications, such as yourhome, so wheneveryou

leave you will not get a notification. Try adding a specific place by tapping

Add safe

place

English

Using the product

Protecting my product and what it’s attached

If you lost the product, you can protect your product by having it send you a notification.

You can also protect your product and what it’s attached to by displaying emergency

contact information on the other’s mobile device when they have found your product

and what it’s attached to and try to recognise it with their mobile devices, and locking

the product so that others cannot connect to it.

For example, if the pet that the product is attached to becomes lost, the guardian’s

contact information can be checked by placing a mobile device on the product to

recognise it.

•

To use this feature, the mobile device to recognise the product must support the

NFC feature and set to Standard mode.

•

When trying to recognise the product with the mobile device, ensure that the

mobile device’s screen is turned on and unlocked. Otherwise, the mobile device

will not receive data.

•

To recognise the product with your mobile device, place your mobile device’s NFC

antenna area overthe product’s button.

1 Open the

SmartThings

app on your mobile device.

2 Tap

Life

→

Find

→

Lost mode

3 Read the on-screen instructions and tap

4 Enterthe information and tap

Turn on

English

Autres manuels pour Galaxy SmartTag2

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Samsung Système de sécurité

Samsung

Samsung SSC-12 Manuel utilisateur

Samsung

Samsung SDS-P3042 Manuel utilisateur

Samsung

Samsung SCU-9051 Manuel utilisateur

Samsung

Samsung SDS-P5082 Manuel utilisateur

Samsung

Samsung SDE-5003 Manuel utilisateur

Samsung

Samsung ADT Security Hub Manuel utilisateur

Samsung

Samsung SSA-P102 Manuel utilisateur

Samsung

Samsung SDS-P3042 Manuel utilisateur

Samsung

Samsung SMM-15FDQ Manuel utilisateur

Samsung

Samsung SSC17WEB Manuel utilisateur

Samsung

Samsung SEW-3037W Manuel utilisateur

Samsung

Samsung SSA-C100 Manuel utilisateur

Samsung

Samsung SOD-14C4LN Manuel utilisateur

Samsung

Samsung SSC-21WEB Manuel utilisateur

Samsung

Samsung SDH-C75080 Manuel utilisateur

Samsung

Samsung LTE eNB Manuel utilisateur

Samsung

Samsung SSA-S2100 Manuel utilisateur

Samsung

Samsung SDS-P3042 Manuel utilisateur

Samsung

Samsung SSC-21WEB Manuel utilisateur

Samsung

Samsung SMO-210DN Manuel utilisateur

Samsung

Samsung Wisenet SNK-B73040BW Manuel utilisateur

Samsung

Samsung SDH-P4041 Manuel utilisateur

Samsung

Samsung SDS-P4040 Manuel utilisateur

Samsung

Samsung SMT-190DN - Monitor + DVR Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur