Samsung SNB-2000P Manuel utilisateur

NETWORK CAMERA

User Manual SNB-2000(P)

2_ overview

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a

risk of electric shock is present within this unit.

This symbol indicates that there are important

operating and maintenance instructions in the literature

accompanying this unit.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this appliance

to rain or moisture.

To prevent injury, this apparatus must be securely attached to the ﬂoor/

wall in accordance with the installation instructions.

If this power supply is used at 24V ac, a suitable plug adapter should be

used.

The camera is to be only connected to PoE networks without routing to

the outside plant.

WARNING

Be sure to use only the standard adapter that is speciﬁed in the

speciﬁcation sheet.

Using any other adapter could cause ﬁre, electrical shock, or damage to

the product.

Incorrectly connecting the power supply or replacing battery may cause

explosion, ﬁre, electric shock, or damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the

capacity may cause abnormal heat generation or ﬁre.

Securely plug the power cord into the power receptacle. Insecure

connection may cause ﬁre.

overview

English _3

●OVERVIEW

When installing the camera, fasten it securely and ﬁrmly. The fall of

camera may cause personal injury.

Do not place conductive objects (e.g. screwdrivers, coins, metal parts,

etc.) or containers ﬁlled with water on top of the camera. Doing so may

cause personal injury due to ﬁre, electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations. Doing so may

cause ﬁre or electric shock.

If any unusual smells or smoke come from the unit, stop using the

product. In such case, immediately disconnect the power source and

contact the service center. Continued use in such a condition may

cause ﬁre or electric shock.

If this product fails to operate normally, contact the nearest service

center. Never disassemble or modify this product in any way.

(SAMSUNG is not liable for problems caused by unauthorized

modiﬁcations or attempted repair.)

When cleaning, do not spray water directly onto parts of the product.

Doing so may cause ﬁre or electric shock

Do not expose the product to the direct airﬂow from an air conditioner.

Otherwise, it may cause moisture condensation inside the Clear Dome

due to temperature difference between internal and external of the

dome camera.

If you install this product in a low-temp area such as inside a cold store,

you must seal up the wiring pipe with silicon, so that the external air can

not ﬂow inside the housing.

Otherwise, external high, humid air may ﬂow inside the housing, pooling

moisture or vapor inside the product due to a difference between

internal and external temperature.

10.

11.

12.

overview

4_ overview

CAUTION

Do not drop objects on the product or apply strong blows to it. Keep

away from a location subject to excessive vibration or magnetic

interference.

Do not install in a location subject to high temperature (over 50°C), low

temperature (below -10°C), or high humidity. Doing so may cause ﬁre or

electric shock.

If you want to relocate the already installed product, be sure to turn off

the power and then move or reinstall it.

Remove the power plug from the outlet when there is a lighting storm.

Neglecting to do so may cause ﬁre or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁre.

Install it in a place with good ventilation.

Avoid aiming the camera directly towards extremely bright objects such

as sun, as this may damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects

ﬁlled with liquids, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily

operable at any time.

When using the camera outdoors, moisture may occur inside the

camera due to temperature difference between indoors and outdoors.

For this reason, it is recommended to install the camera indoors. For

outdoor use, use the camera with built-in fan and heater.

10.

English _5

●OVERVIEW

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions :

1) This device may not cause harmful interference, and

2) This device must accept any interference received including interference that

may cause undesired operation.

CAUTION

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the

Canadian Interference.-Causing Equipment Regulations of

ICES-003.

overview

6_ overview

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus

(including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or the third prong is

provided for your safety. If the provided plug does not ﬁt into your outlet, consult an

electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁed by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table speciﬁed by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lightning storms or when unused for

long periods of time.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the

apparatus has been damaged in any way, such as powersupply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on the apparatus

10.

11.

12.

13.

14.

English _7

●OVERVIEW

CONTENTS

OVERVIEW

6Important Safety Instructions

9Product Features

9Recommended PC Speciﬁcations

10 What’s Included

11 At a Glance

INSTALLATION &

CONNECTION

13 Mounting the lens

15 Connecting with other Device

CAMERA SETUP

How to use the Keyboard Controller

18 Main Menu

18 Proﬁle

19 Camera Setup

23 Privacy Zone

24 Others

25 System Info

NETWORK CONNECTION

AND SETUP

26 Connecting the Camera to an

Broadband Router with the

xDSL/cable Modem

27 Connecting the Camera to an

Broadband Router with Local

Area Networking

Connecting the Camera Directly to

a DHCP-based xDSL/cable Modem

29 Connecting the Camera Directly

to Local Area Networking

30 IP Address Setup

31 Static IP Setup

34 Dynamic IP Setup

35 Port Range Forward (Port

Mapping) Setup

35 Connecting to the camera from a

shared local PC

36 Connecting to the camera from a

remote PC via the Internet

overview

8_ overview

WEB VIEWER

37 Connecting to the camera

38 Login

39 Installing ActiveX

40 Using the Live Screen

41 Backup

SETUP SCREEN

43 Accessing the Setup screen

44 Default Setup

48 System Setup

51 Overlay Setup

52 Event Setup

58 Network Setup

APPENDIX

59 Proﬁle

60 Terminology

61 Speciﬁcations

65 Frame Rate (NTSC)

71 Frame Rate (PAL)

77 Troubleshooting

79 GPL/LGPL Software License

English _9

●OVERVIEW

PRODUCT FEATURES

Support various communication protocols

Supports TCP/IP, UDP, RTP/RTSP, SMTP for email, and FTP protocols as well as various

internet protocols such as ARP, HTTP, HTTPS and DHCP.

Web Browser-based Monitoring

Using the Internet web browser to display the image in a local network environment.

Automatic Local IP Setup

Even a network novice can install it with minimum operations.

Alarm

If the camera equipped with an alarm sensor senses any motion, it will send a notiﬁcation

to a user FTP/email account (SMTP) or send the corresponding signal to the Alarm Out

terminal.

Motion Detection

If the camera with a speciﬁed motion area detects a motion in that area, it will send a

notiﬁcation to a user FTP/email account (SMTP) or send the corresponding signal to the Alarm

Out terminal.

ONVIF (Spec 1.01) Compliance

This product supports ONVIF Core Spec. 1. 01.

For more information, refer to www.onvif.org.

RECOMMENDED PC SPECIFICATIONS

CPU : Pentium4 / 2.4GHz or higher

Operating System : Windows XP(Service Pack2, Service Pack3) / Windows Vista / Windows 7

Resolution : 1024X768 pixels or higher

RAM : 512MB or higher

Web Browser : Internet Explorer 6.0 or higher

Video Card : Radeon, Nvidia

Video Memory : 128MB

DirectX 8.1 or higher

Compatible Broadband Router

Linksys

D-Link

Netgear

Compatible PoE Switches

Linksys SRW224G4P

D-Link DES-1316

SMC SMCPWR-INJ3

overview

10_ overview

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Camera C Mount Adapter

Auto Iris Lens Connector

Camera Holder (Mount)

& Screws (2EA)

User Manual,

Installer S/W CD,CMS S/W DVD Quick Guide

Lens Options

CS Lens C Lens

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Samsung Caméra de sécurité

Samsung

Samsung SCC-B9221 - IR Bullet Camera Manuel utilisateur

Samsung

Samsung SCC-643 Manuel utilisateur

Samsung

Samsung SCC-B531x(B) Manuel utilisateur

Samsung

Samsung SNB-7001 Manuel utilisateur

Samsung

Samsung SCV-2080R Series Manuel utilisateur

Samsung

Samsung Samsung-T Protocol Manuel utilisateur

Samsung

Samsung SDZ-375 Manuel utilisateur

Samsung

Samsung SHB-4300H Manuel utilisateur

Samsung

Samsung SND-7084 Manuel utilisateur

Samsung

Samsung SCO-2080RH Manuel utilisateur

Samsung

Samsung SCC-B9371 Manuel utilisateur

Samsung

Samsung SNC-B2335 Manuel utilisateur

Samsung

Samsung SCC-B5331 Manuel utilisateur

Samsung

Samsung SCC-C6437 Manuel utilisateur

Samsung

Samsung SCP-3370TH Manuel utilisateur

Samsung

Samsung SCC-B5201(S)P Manuel utilisateur

Samsung

Samsung SCO-2080R Manuel utilisateur

Samsung

Samsung SCO-2120R Manuel utilisateur

Samsung

Samsung SCC-C4301 Manuel utilisateur

Samsung

Samsung SCP-3371 Manuel utilisateur

Samsung

Samsung SNV-5080R Manuel utilisateur

Samsung

Samsung iPOLiS SNP-3120 Manuel utilisateur

Samsung

Samsung SCC-931T Manuel utilisateur

Samsung

Samsung SND-5080 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur