Samsung SCC-C4239P Manuel utilisateur

User Manual

Power Zoom Camera

SCC-C4237P

SCC-C4337P

SCC-C4239P

SCC-C4339P

imagine the possibilities

Thanks you for purchasing this Samsung product.

To receive a more complete service, please visit

our website

www.samsungsecurity.com

SCC-C4239P-TRK-ENG.indd 1SCC-C4239P-TRK-ENG.indd 1 2009-10-9 9:28:542009-10-9 9:28:54

2_ overview

overview

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of

electric shock is present within this unit.

This symbol indicates that there are important operating and

maintenance instructions in the literature accompanying this unit.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this appliance to rain or

moisture.

To prevent injury, this apparatus must be securely attached to the ﬂoor/wall in

accordance with the installation instructions.

WARNING

Be sure to use only the standard adapter that is speciﬁed in the speciﬁcation

sheet.

Using any other adapter could cause ﬁre, electrical shock, or damage to the

product.

Incorrectly connecting the power supply or replacing battery may cause

explosion, ﬁre, electric shock, or damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the capacity

may cause abnormal heat generation or ﬁre.

Securely plug the power cord into the power receptacle. Insecure connection

may cause ﬁre.

When installing the camera, fasten it securely and ﬁrmly. The fall of camera

may cause personal injury.

Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.)

or containers ﬁlled with water on top of the camera. Doing so may cause

personal injury due to ﬁre, electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations. Doing so may cause



SCC-C4239P-TRK-ENG.indd 2SCC-C4239P-TRK-ENG.indd 2 2009-10-9 9:31:442009-10-9 9:31:44

English _3

English

ﬁre or electric shock.

If any unusual smells or smoke come from the unit, stop using the product. In

such case, immediately disconnect the power source and contact the service

center. Continued use in such a condition may cause ﬁre or electric shock.

If this product fails to operate normally, contact the nearest service center.

Never disassemble or modify this product in any way. (SAMSUNG is not liable

for problems caused by unauthorized modiﬁcations or attempted repair.)

When cleaning, do not spray water directly onto parts of the product. Doing

so may cause ﬁre or electric shock.

CAUTION

Do not drop objects on the product or apply strong blows to it. Keep away

from a location subject to excessive vibration or magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low

temperature (below -10°C), or high humidity. Doing so may cause ﬁre or

electric shock.

If you want to relocate the already installed product, be sure to turn off the

power and then move or reinstall it.

Remove the power plug from the outlet when there is a lighting storm.

Neglecting to do so may cause ﬁre or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁre.

Install it in a place with good ventilation.

Avoid aiming the camera directly towards extremely bright objects such as

sun, as this may damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled

with liquids, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable

at any time.

When using the camera outdoors, moisture may occur inside the camera due

to temperature difference between indoors and outdoors. For this reason, it is

recommended to install the camera indoors. For outdoor use, use the camera

with built-in fan and heater.

10.

SCC-C4239P-TRK-ENG.indd 3SCC-C4239P-TRK-ENG.indd 3 2009-10-9 9:31:442009-10-9 9:31:44

overview

4_ overview

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, or other

apparatus (including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug does not ﬁt into

your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁed by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when

unused for long periods of time.

Refer all servicing to qualiﬁed service personnel. Servicing is required when

the apparatus has been damaged in any way, such as powersupply cord

or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on the apparatus

10.

11.

12.

13.

14.

SCC-C4239P-TRK-ENG.indd 4SCC-C4239P-TRK-ENG.indd 4 2009-10-9 9:31:442009-10-9 9:31:44

English _5

English

CONTENTS

OVERVIEW

4Important Safety Instructions

5Contents

6Features

7What’s Included

7Part Names and Functions

INSTALLATION &

CONNECTION

11 Preparing Installation

11 Connecting the Cables

SETUP

14 Main Menu

15 Proﬁle

17 Camera Set

26 Intelligent Video

28 Privacy Zone

29 Preset

30 Other Set

31 Communication

31 System Info

32 Language

APPENDIX

33 Shortcut Keys

34 Speciﬁcations

SCC-C4239P-TRK-ENG.indd 5SCC-C4239P-TRK-ENG.indd 5 2009-10-9 9:31:442009-10-9 9:31:44

overview

6_ overview

FEATURES

With the state-of-the-art digital signal processing technology, full digital image

processing and special algorithm of 600-line high resolution implemented.

High Sensitivity: It implements images of high sensitivity using the up-to-date Super-

HAD IT CCD(SCC-C4237P/C4337P)/ExView-HAD PS CCD(SCC-C4239P/C4339P).

VPS(Virtual Progressive Scan): This is an advanced technology that reproduces a

sharp progressive image. This is appropriate to high quality recording and ﬁle transfer

via the Internet. (SCC-C4239P/C4339P only)

High performance surveillance camera, equipped with x34 zoom lens and digital

zoom IC, enabling monitoring up to 544 times

WDR extends the contrast range as it takes a picture of each of dark and bright areas

before compositing the two, which is useful if you take a picture of windows inside

a building. Namely, it improves the picture quality of the outdoor scenery as well as

indoor.(SCC-C4239P/C4339P only)

Low Illumination: It uses the digital signal technologies such as low illumination

and Day/Night functions that make your camera identify objects even in the worst

environment.

XDR (eXtended Dynamic Range): Actively controls the gamma compensation in the

way it operates the ambient luminance contrast in a certain pixel unit to determine

the optimal visibility.

Digital Power Synchronization: The full digital Line Lock function directly adjusts the

vertical camera synchronization to enhance the operationability and reliability of this

camera.(SCC-C4337P/C4339P only)

DAY/NIGHT:

This function can make the IR Cut ﬁltering function inactive under the

illumination below the normal value.

White Balance to control the brightness to the illumination

Superior Backlight Adjustment:When an object has a bright illumination or sunlight

behind it, this camera automatically improves the shaded object picture quality.

Auto Focus to automatically adjust the focus to the subject movement

Privacy zone to hide a speciﬁc area for personal privacy.



SCC-C4239P-TRK-ENG.indd 6SCC-C4239P-TRK-ENG.indd 6 2009-10-9 9:31:442009-10-9 9:31:44

English _7

English

PART NAMES AND FUNCTIONS

SIDE VIEW

Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have

applied ethanol.

M

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Camera

Camera Holder

(Mount Adaptor)

2 Screws

User's Manual

Mount Adapter

Fixing Grooves

Camera Lens

SCC-C4239P-TRK-ENG.indd 7SCC-C4239P-TRK-ENG.indd 7 2009-10-9 9:31:452009-10-9 9:31:45

overview

8_ overview

Rear Panel











SCC-C4337P











SCC-C4237P

Input/Output Connector

This connector has input and output ports for RS-485 control signals,

DAY/NIGHT switching, and alarm output signals.

SCC-C4339P





















SCC-C4239P

SCC-C4239P/C4339P SCC-C4237P/C4337P

SCC-C4239P-TRK-ENG.indd 8SCC-C4239P-TRK-ENG.indd 8 2009-10-9 9:31:452009-10-9 9:31:45

English _9

English

1. ALARM OUT

Alarm out jack for motion detection. (Open Collector, On Gnd)

2. GND

Grounding jack.

3. TRIGGER IN (SCC-C4239P/C4339P)

Displays the current still image when it receives the Trigger signal. (Normal

Open Type)

4.5.6 FOCUS, COM, ZOOM

This port is used for ZOOM/FOCUS, MENU CONTROL, HOME

RETURN, and ONEAF by using an external controller.

Depending on the input condition, 4 modes, A, B, C, and D are

available. (SPECIAL - CTRL TYPE)

(Operation Voltage Range : +3V~+13V, -3V~-13V)

1) When the voltage is supplied to either ZOOM or FOCUS port

Function

Code

Tele(Up)

Wide(Down)

Near(Left) Far(Right)

ZOOM Port FOCUS Port

A -6V +6V -6V +6V

B -6V +6V +6V -6V

C +6V -6V -6V +6V

D+6V -6V +6V -6V

*1: During MENU OFF, controls ZOOM/FOCUS and during MENU ON,

changes the direction, Up/Down/Left/Right SETUP switch.

2) When the voltage is supplied to both ports

Function

Code

ENTER/AF *2 HOME RETURN *3

ZOOM Port

FOCUS Port

ZOOM Port

FOCUS Port

A -6V -6V +6V +6V

B -6V +6V +6V -6V

C +6V -6V -6V +6V

D+6V +6V -6V -6V

SCC-C4239P-TRK-ENG.indd 9SCC-C4239P-TRK-ENG.indd 9 2009-10-9 9:31:462009-10-9 9:31:46

10_ installation & connection

* 2 : For short voltage supply during MENU OFF, executes ONEAF and for

more than 2 second

* 3 : For more than 2 second long voltage supply, moves to the PRESET

0(HOME) position.

7. 5V OUT

Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA.

8. DAY/NIGHT IN

This is a function to receive the external DAY/NIGHT signal from the

sensor(option) and convert the signal into BW.

9. RS-485 DATA-

Jack for connection to RS-485 DATA- signal line.

10. RS-485 DATA+

Jack for connection to RS-485 DATA+ signal line.

SETUP Switch

This switch is used to set the function or property. When this switch is pressed

for at least 2 seconds, the MAIN MENU appears.

(Left/Right)

: By pressing this switch left or right, you can move left or right

on the menu or change the displayed value.

(Up/Down) :

By pressing this switch up or down, you can move up or down on

the menu.

: When you press this switch in the menu, the selected function is conﬁrmed.

To enter a submenu, press this button.

Video OUT Port

This is connected to the Video Input Port of the monitor and it outputs the

Video signals.

GND

This is a grounding port.

Power Connection Port

This is connected to the Power cable.

Power Display LED

When the power is normally connected, the red LED lights.

SCC-C4239P-TRK-ENG.indd 10SCC-C4239P-TRK-ENG.indd 10 2009-10-9 9:31:462009-10-9 9:31:46

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Samsung Caméra de sécurité

Samsung

Samsung SNV-5010 Manuel utilisateur

Samsung

Samsung SCP-2430 Manuel utilisateur

Samsung

Samsung SND-7080F Manuel utilisateur

Samsung

Samsung SCC-B5397 Manuel utilisateur

Samsung

Samsung SCC-C7478 Manuel utilisateur

Samsung

Samsung SID-41C SERIES Manuel utilisateur

Samsung

Samsung SCC-B9372P Manuel utilisateur

Samsung

Samsung SID-50 Manuel utilisateur

Samsung

Samsung SKK-CH601/US Manuel utilisateur

Samsung

Samsung SNP-6201 Manuel utilisateur

Samsung

Samsung SID-600P Manuel utilisateur

Samsung

Samsung SID-50 Series Manuel utilisateur

Samsung

Samsung SCC-C4201(P) Manuel utilisateur

Samsung

Samsung SCC-C9302(F) Manuel utilisateur

Samsung

Samsung SIR-4260 Manuel utilisateur

Samsung

Samsung IPOLIS SNC-570 Manuel utilisateur

Samsung

Samsung SCD-2022R Manuel utilisateur

Samsung

Samsung SNV-L6013R Manuel utilisateur

Samsung

Samsung SCC-B5343 Manuel utilisateur

Samsung

Samsung SCB-2000 Manuel utilisateur

Samsung

Samsung SNP-3370TH Manuel utilisateur

Samsung

Samsung SCC-B5201(S)P Manuel utilisateur

Samsung

Samsung SCC-C6437 Manuel utilisateur

Samsung

Samsung SNH-1011 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur