Samsung WMN-M22E Mode d’emploi

Slim Fit Wall-Mount

www.samsung.com

Cautions when installing

WMN-M22E

-X1

- English 2 - - English 3 -

Cautions when installing

Model name WMN-M22E

Width (mm) 520

Height (mm) 277

Thickness (mm) 15.6

TV tilt (°) * Max. 5° (other tilt angles are not allowed)

Package size (W x D x H) (mm) 594 x 378 x 75

Package weight (kg)4.0±0.5

Max. allowable TV weight (kg) 50

Standard stud distance 16" supported / 24" not supported

Compatible TVs

Clearance from the wall (mm)

2017Y SAMSUNG TV Q7 Series, 75" (0 mm or more)

2017Y SAMSUNG TV Q8 Series, 75" (0 mm or more)

2017Y SAMSUNG TV Q9 Series, 75" (6 mm or more)

2018Y SAMSUNG TV Q7 Series, 75" (7 mm or more)

2018Y SAMSUNG TV Q9 Series, 75" (7 mm or more)

* You cannot install the TV at a random angle. The tilt angle can be expanded up to 5 degrees.

•Be sure to use the components and parts provided for installing the wall mount.

•The manual instructions and provided parts are based on the typical walls (made of wood or concrete). (In case of

the WMN-M22E(A) model, the drywall mounting parts are additionally provided.)

•In case of the other cases, use separate mounting parts or perform wall reinforcement in advance. If required,

install the wall mount with an aid of expert.

•Be cautious not to damage the TV screen while installing the wall mount.

•Check your TV's model series. Then use the appropriate preparation methods for the support frames using the

appropriate screws.

•If you do not follow the installation instructions suitable foryour TV model, the wall mount and TV connection

may be unstable.

2017Y Q7FM/Q7CM/Q8CM 2017Y Q9FM 2018Y Q7FN 2018Y Q9FN

- English 2 - - English 3 -

•When installing or uninstalling the wall mount support frame, make sure 2 people work on it, and the TV is off.

•Use a at table when installing the wall mount. Use the TV packing material (cushion) for curved TVs.

Flat TV Curved TV

•Install the wall mount only on the wall that is larger than the TV and is not tilted. After installation, the cover or

attachment at the bottom of the TV must touch the wall. Otherwise, the wall mount must not be installed.

Wall that is larger than TV

(Installable)

Tilted wall

(Not installable)

Wall that is not larger than the

wall mount

(Not installable)

•Before mounting the TV to a wall, connect the power cable and One Connect cable to the TV.

•When installing / uninstalling the wall mount, be careful not to damage the optical cable. Especially, be careful

not to step on the optical cable.

•Use a screwdriver to assemble the TV to the support frame. Using an electric screwdriver may cause screw

threads to wear out.

•The minimum distance between the TV and wall may be 2-3 mm or more depending on the wall surface or

installation conditions.

•The distance between the wall and the left or right side of the TV may differ depending on the wall and

installation conditions.

•When installing the wall mount, if the TV is too close to a wall, scratches may occur on the back of the TV or on a

wall.

•A lot of force is required to open the bracket before installing the wall mount. Be careful not to hurt yourself

when opening the bracket. (Brackets with tilt options are difcult to open because they need to withstand the

weight of the TV.)

- English 4 - - English 5 -

•In cases with tight installation conditions, friction between the TV/accessories and the wall may damage the wall

or the back of the TV. Use a scratch protector as in the picture in such cases. However, distance from the wall

may increase.

•You must use parts as in the picture to attach Q9 series TVs. This restricts movement between the TV and wall

due to distance from the wall and prevents the TV from leaning forward.

If the TV leans forward, use 2 overlapping parts. This may additionally improve the inclination. However,

distance from the wall may increase.

•A curved TV may move left and right after being installed to the wall mount. You can suppress the TV from moving

left and right by using accessories - together. (Adjust the horizontal length of the part to be the same.)

You can also suppress a Flat TV from moving left and right by using accessories - . However, distance from

the wall may increase.

Flat TV Curved TV

- English 4 - - English 5 -

•If there is a protruding part on the wall where you want to install the wall mount, you may use accessories -

to secure enough distance between the TV and a wall. (Adjust the horizontal length of the part to be the same.)

However, the distance to the wall will become larger.

•If you secure distances using those accessories, you may not be able to use the tilt option. If you want to use the

tilt option, the secured distance is limited.

•The maximum tilt angle differs depending on the TV model. The tilt angle may not be maintained on the wall with

vibration.

•You cannot choose the tilting angle. (You can only install at the maximum tilting angle.) You must use the

accessory to maintain the tilt. If you do not use the accessory , it may cause the TV's tilting angle to sag.

•When xing the tilt angle with the ( ) part, do not stick the TV to the wall. It may cause damage to the xture.

- English 6 - - English 7 -

•Afterwall mount installation, movement may occur on some TV models depending on the rear shape of the TV. In

this case, use the separation holder ( ).

Triangular support allows more stable wall mount installation. However, distance from the wall may increase.

•If you cannot adjust the horizontal level by using the horizontal adjustment function, check if the installation was

done properly.

If you cannot use the horizontal adjustment function, the xers on the wall mount's support frame are not

properly xed. Make sure to install them properly.

•The horizontal level that can be adjusted is just 1 to 2 degrees. To adjust the horizontal level at more angles than

this range, reinstall the wall mount.

•If the wall mount's xers are not xed to the end as shown in the gure, subtle impacts may move the TV. In this

case, make sure to install the xers properly so that they are xed to the TV all the way to the end.

•To prevent cable damage when dismounting the TV from the wall, disconnect the power cable and the optical

cable before removing the wall mount.

•When detaching the TV from the wall, rst pull it forward, and then be sure that two people pull it upward

simultaneously. Do not apply direct force on the display.

- English 6 - - English 7 -

•When you grab the TV to install, remove, adjust the horizontal level, or tilt the wall mount, do not apply direct

force on the display.

•When you handle the TV to install, remove, adjust the horizontal level, or tilt the wall mount, be careful not to

damage any cables.

•Be sure that the TV and wall mount stand are not hit with excessive force after installing the wall mount. The wall

mount or TV may be damaged or the TV connection with the wall mount device may become unstable. In this case,

reinstall the wall mount or consult an expert for assistance.

•Check the product model as well as the enclosed user manual for each product and check that the wall allows

mounting.

–Be sure the wall is stable. If the wall is weak, reinforce it before installation.

–If the wall is not cement, check with a specialist to determine whether the TV may be installed on it.

–Consult an expert installer if you do not have any background knowledge about the wall you want to install the

product on.

•To maintain product performance and prevent malfunctions, do not install in the following locations.

–Places where there is a risk of vibration or shock: The product may fall and be damaged.

–Next to a sprinkler sensor: The sensor may detect the heat from the TV and sprinklers may start.

–Near high-pressure cables: The TV may get interfered by high-pressure cable and the screen may not display

correctly.

–Near heaters: The TV may become overheated and malfunction.

–Do not install anywhere other than a vertical wall.

–Install it out of the reach of children.

–Do not penetrate the wall to install inside.

–Be sure to check the type and condition of the wall you

will install on.

–Materials to be used may differ depending on wall type.

Choose materials based on the specications below.

–You do not need to use all the supplied screws. However,

you must use at least 4 screws.

–You must use screws in the two locations marked as A.

–Choose at least 2 of the parts marked B to assemble

depending on surroundings.

–To hide the cables inside the wall, contact an expert

installer.

This page is intentionally

left blank.

Autres manuels pour WMN-M22E

Table des matières

Autres manuels Samsung Support et étagère

Samsung

Samsung WMN8200SFXEN Manuel utilisateur

Samsung

Samsung WMN550M/XC Manuel utilisateur

Samsung

Samsung SHD-3000F2 Manuel utilisateur

Samsung

Samsung Sbr-100dcm Manuel utilisateur

Samsung

Samsung WMN-4270SD Manuel utilisateur

Samsung

Samsung Sbr-100dcm Manuel utilisateur

Samsung

Samsung UN26C4000PD Manuel utilisateur

Samsung

Samsung WMN350M Manuel utilisateur

Samsung

Samsung TWMB-1900 Manuel utilisateur

Samsung

Samsung WMN-M13E Manuel utilisateur

Samsung

Samsung WMN550M Manuel utilisateur

Samsung

Samsung WMN4270S Manuel utilisateur

Samsung

Samsung Q7FN Series Manuel utilisateur

Samsung

Samsung WMN-1000B Manuel utilisateur

Samsung

Samsung WISENET SBP-122HM Manuel utilisateur

Samsung

Samsung WMN-M10E Mode d’emploi

Samsung

Samsung WMN-M15EB Mode d’emploi

Samsung

Samsung SBP-300NB Manuel utilisateur

Samsung

Samsung WMN550M Manuel utilisateur

Samsung

Samsung WMN4070SD Manuel utilisateur

Samsung

Samsung WMN4070TT Manuel utilisateur

Samsung

Samsung WMN-7070 Manuel utilisateur

Samsung

Samsung SADT-100EC Manuel utilisateur

Samsung

Samsung LFD EX Series Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur