Samsung PS-37S4A1 Guide de démarrage rapide
Connecting VHF and UHF Antennas
1
Antennas with 75-ohm Round Leads
If your antenna looks like this: it has 75-ohm round leads.
1Plug the antenna lead into the VHF/UHF terminal
on the PDP.
Use the Antenna Cable, an accessory included
in the product package.
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 18
2
Connecting Cable TV
You can connect different cable systems to your PDP, including cable without a cable box,
and cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
1 Plug the incoming cable into the VHF/UHF terminal on
the PDP.
Use the Antenna Cable, an accessory included
in the product package.
Cable with a Cable Box that Descrambles All Channels.
1 Find the cable connected to the ANTENNA OUT
terminal on your cable box. This terminal might be
labeled "ANT OUT", "VHF OUT" or simply "OUT".
2 Connect the cable to the VHF/UHF terminal on the
PDP.
Use the Antenna Cable, an accessory included
in the product package.
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 19
3
Cable with a Cable Box that Descrambles Some (But Not All) Channels
To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial
cables (which you can buy from your Samsung dealer or any electronics store).
1Find and disconnect the cable that is con-
nected to the ANTENNA IN terminal of
your cable box.
This terminal might be labeled "ANT IN",
"VHF IN" or simply, "IN". Connect this
cable to a two-way splitter.
2Connect a coaxial cable between an OUT-
PUT terminal of the splitter and the IN termi-
nal of the cable box.
3Connect a coaxial cable between the
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
4Connect a coaxial cable between the
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
5Connect the last coaxial cable between the
OUT terminal of the RF (A/B) switch and
the VHF/UHF terminal on the PDP.
After you've made this connection, set the A/B switch to the "A" position for normal viewing.
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch
to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually
channel 3 or 4.)
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 20
4
Connecting a VCR
Connecting a VCR to the Video or S-Video/Audio jack
S-Video Cable
Audio Cable
or Video Cable
Power Plug
Connect the Video/Audio cables between the AUDIO(L/R)/VIDEO jacks on the PDP and
AUDIO/VIDEO OUT jacks on the VCR. (Note: For better video, you can use an S-Video cable.)
Videotape Playback:
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “Video” or “S-Video”.
3. Turn on your VCR, insert a videotape and press the play button.
How to Connect
PDP
VCR
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 21
5
Connecting a Camcorder
Audio Cable
Video Cable
Power Plug
Connect a Video/Audio cable between the AUDIO(L/R)/VIDEO jacks on the PDP and the
VIDEO/AUDIO OUTPUT jacks on the camcorder.
Viewing Tapes
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “Video”.
3. Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder
Owner’s instructions.)
4. Set the IN/OUT switch on your camcorder to OUT.
5. Insert the tape into the camcorder and press the Play button.
How to Connect
Viewing camcorder tapes
PDP
Camcorder
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 22
6
Connecting a DVD Player (480i, 480p)
This PDP displays the optimum picture in 720p mode.
Playing DVD
Audio Cable
Video Cable
Power Plug
Connect a Video Cable between the Y, Pb, Pr(COMPONENT) input jacks on the PDP and
Y/PB/PRoutput jacks on the DVD player.
Connect a Audio Cable between the AUDIO L/R(COMPONENT) input jacks on the PDP and
the AUDIO OUT jacks on the DVD player.
To Play DVD:
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “COMPONENT”.
3. Turn on your DVD player, insert a DVD disc and press the Play button.
• For an explanation of Component video, see your DVD owner’s instructions.
How to Connect
1
2
PDP DVD Player
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 23
Connecting a DTV Receiver
(480p, 720p, 1080i)
This PDP displays the optimum picture in 720p mode.
7
Watching DTV
Video Cable
Audio Cable
DVI Cable
or
Power
Plug
Connect the cable or antenna to the antenna input jack on the DTV.
Connect a Video cable between the Y, Pb, Pr(COMPONENT) or DVI jack on the PDP and the
Y, PB, PR(VIDEO OUTPUT JACKS) on the DTV receiver.
Connect an Audio cable between the COMPONENT (L/R AUDIO) or DVI jacks on the PDP
and the AUDIO OUTPUT jacks on the DTV receiver.
To Watch DTV:
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “COMPONENT” or “DVI”.
3. Turn on your DTV receiver.
• For an explanation of Component video, see your DTV receiver owner’s instructions.
How to Connect
1
2
3
Use a DVI-D connection cable. (sold separately)
PDP
DTV Receiver
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 24
Autres manuels pour PS-37S4A1
2
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Samsung Téléviseur plasma
Samsung
Samsung PS43E491 Manuel utilisateur
Samsung
Samsung PL42B450B1XZD Manuel utilisateur
Samsung
Samsung PN51F8500AF Manuel utilisateur
Samsung
Samsung PN50A550 Manuel utilisateur
Samsung
Samsung PN50A550 Manuel utilisateur
Samsung
Samsung Series 4+ Manuel utilisateur
Samsung
Samsung PS50B560T7W Manuel utilisateur
Samsung
Samsung PS43D450 Manuel utilisateur
Samsung
Samsung PS-42D7HD Manuel utilisateur
Samsung
Samsung 5+ SERIES Manuel utilisateur
Samsung
Samsung PS42C450B1W Manuel utilisateur
Samsung
Samsung PS51E450A1WXZF Manuel utilisateur
Samsung
Samsung PN50C490B3D Manuel utilisateur
Samsung
Samsung BN68-01416D-00 Manuel utilisateur
Samsung
Samsung PS-42P3ST Manuel utilisateur
Samsung
Samsung PN51E550 Manuel utilisateur
Samsung
Samsung PS42B450B Manuel utilisateur
Samsung
Samsung PN42C430A1D Manuel utilisateur
Samsung
Samsung PS51F5505 Manuel utilisateur
Samsung
Samsung PN58B560 Manuel utilisateur
