Samsung HP-P4271 Manuel utilisateur

Remote Control Buttons

ŒPOWER button

Turns the PDP on and off.

´ASPECT button

Press to change the screen size.

ˇNumber buttons

¨+100 button

Press to select channels over 100. For example, to select

channel 121, press “+100”, then press “2” and “1.”

ˆMUTE button

Press to mute the PDP sound.

ØVOL (Volume) buttons

Use it to adjust volume.

∏Anynet button

Runs the Anynet view functions and sets up the Anynet

devices.

”MENU button

Displays the main on-screen menu.

’ENTER button

Confirms a selection.

˝PIP button

Activates picture in picture.

ÔSTILL button

Press to pause the current screen.

LCD Display

When you press a button, ‘ ‘ appears along with

selected mode (TV, VCR, CATV, DVD or STB) and

the remote's battery charge status.

ÒP.MODE button

Adjust the PDP picture by selecting one of the preset

factory settings (or select your personal, customized

picture settings.)

ÚMODE button

Selects a target device to be controlled by the Samsung

remote control (i.e., VCR, Cable, DVD players or Samsung

STB). If you change modes, the new mode is momentarily

displayed on LCD.

ÆPRE-CH button

Tunes to the previous channel.

ıSOURCE button

Press to display all of the available video sources

(TV, AV1, AV2, AV3, S-VIDEO1, S-VIDEO2, COMPONENT1,

COMPONENT2, PC, DVI).

˜CH (Channel) buttons

Use it to switch channels.

¯INFO button

Press to display information on the PDP screen.

˘EXIT button

Press to exit the menu.

¿Up/Down Left/Right buttons

Control the cursor in the menu.

Remote Control

BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 8

¸SRS TSXT button

Selects Trusurround XT mode.

˛MTS button

Press to choose stereo, mono or Separate Audio Pro-

gram (SAP broadcast).

◊AUTO PROG. button

The TV automatically cycles through all of the avail-

able channels and stores them in memory.

±ADD/DEL button

Press to add or delete channels in the TV’s memory.

≠DNIe button

Activates DNIe (Digital Natural Image engine).

–CAPTION button

Controls the caption decoder.

—SET button

Used during set up of this Samsung remote control,

so that it will work compatibly with other devices

(VCR, Cable Box, DVD)

÷PIP control buttons

SIZE : Press to make the PIP window Large,

Small or Double.

SWAP : Exchanges the video signal that is

currently displayed on the main screen

with the signal in the PIP window.

:Displays the available channels in

sequence. (These buttons change channels

in the PIP window only).

®VCR, DVD control buttons

Controls VCR tape or DVD disc functions: Stop,

Rewind, Play/Pause, Fast Forward.

∑RESET button

If your remote control is not functioning properly, take

out the batteries and press the reset button for about

2~3 seconds. Re-insert the batteries and try using the

remote control again.

Installing the Batteries in Your Remote Control

1Slide the back cover

to open the battery

compartment of the

remote control.

3Slide the cover back into

place.

2Install two AAA size batter-

ies. Make sure to match the

“+” and “-” ends of the bat-

teries with the diagram

inside the compartment.

Remote Control Operation Range.

You can use your remote control within a distance of 23 feet and an angle of 30 degrees

from the left and right sides of the PDP’s remote control receiver.

BN68-00757A-X2Eng_002~027 7/26/04 4:45 PM Page 9

Antennas with 75-ohm Round Leads

If your antenna looks like this: it has 75-ohm round leads.

1Plug the antenna lead into the VHF/UHF terminal

on the PDP.

Use the Antenna Cable, an accessory included

in the product package.

BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 20

Connecting Cable TV

You can connect different cable systems to your PDP, including cable without a cable box,

and cable with a cable box that descrambles some or all channels.

Cable without a Cable Box

1 Plug the incoming cable into the VHF/UHF terminal on

the PDP.

Use the Antenna Cable, an accessory included

in the product package.

Cable with a Cable Box that Descrambles All Channels

1 Find the cable connected to the ANTENNA OUT

terminal on your cable box. This terminal might be

labeled "ANT OUT", "VHF OUT" or simply "OUT".

2 Connect the cable to the VHF/UHF terminal on the

PDP.

Use the Antenna Cable, an accessory included

in the product package.

BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 21

Cable with a Cable Box that Descrambles Some (But Not All) Channels

To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial

cables (which you can buy from your Samsung dealer or any electronics store).

1Find and disconnect the cable that is

connected to the ANTENNA IN terminal of

your cable box.

This terminal might be labeled "ANT IN",

"VHF IN" or simply, "IN". Connect this

cable to a two-way splitter.

2Connect a coaxial cable between an

OUTPUT terminal of the splitter and the

IN terminal of the cable box.

3Connect a coaxial cable between the

ANTENNA OUT terminal of the cable box

and the B-IN terminal of the A/B switch.

4Connect a coaxial cable between the

ANTENNA OUT terminal of the cable box

and the B-IN terminal of the A/B switch.

5Connect the last coaxial cable between the

OUT terminal of the RF (A/B) switch and

the VHF/UHF terminal on the PDP.

After you've made this connection, set the A/B switch to the "A" position for normal viewing.

Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch

to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually

channel 3 or 4.)

BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 22

Connecting a VCR

Connecting a VCR to the Video or S-Video/Audio jack

Video Cable

Audio Cable

S-Video Cable

Power Cord

Connect the Video/Audio cables between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP

and VIDEO or S-VIDEO / L - AUDIO - R output jacks on the VCR. (Note: For better video, you can use

an S-Video cable.)

Note

•Please be sure to match the color coded input terminals and cable jacks.

Videotape Playback:

1. Turn on your PDP.

2. Press the SOURCE button to select “Video(AV1, AV2 or AV3)” or “S-Video(S-VIDEO1 or

S-VIDEO2)”.

3. Turn on your VCR, insert a videotape and press the play button.

How to Connect

PDP VCR

BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 23

Connecting a Camcorder

Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP

and the VIDEO or S-VIDEO /AUDIO output jacks on the camcorder. (Note: For better video, you

can use an S-VIDEO cable)

Note

•Please be sure to match the color coded input terminals and cable jacks.

Viewing Tapes

1. Turn on your PDP.

2. Press the SOURCE button to select “Video(AV1, AV2 or AV3)” or “S-VIDEO(S-VIDEO1 or

S-VIDEO2)”.

3. Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder

Owner’s instructions.)

4. Set the IN/OUT switch on your camcorder to OUT.

5. Insert the tape into the camcorder and press the Play button.

How to Connect

Viewing camcorder tapes

Audio Cable

S-Video Cable

Video Cable

Power Cord

PDP(SIDE AV3)

PDP

REAR PANEL

Camcorder

BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 24

Connecting a DVD Player (480i, 480p)

This PDP displays the optimum picture in 720p mode.

Playing DVD

Audio Cable

Component Cable

Power Cord

Connect the Y, PB, PR(COMPONENT) input jacks on the PDP with Y, PB, PRoutput jacks on

the DVD player using a component cable.

Connect a Audio Cable between the AUDIO L/R(COMPONENT1, 2) input jacks on the PDP

and the AUDIO output jacks on the DVD player.

Note

•Please be sure to match the color coded input terminals and cable jacks.

To Play DVD:

1. Turn on your PDP.

2. Press the SOURCE button to select “COMPONENT1” or “COMPONENT2”.

3. Turn on your DVD player, insert a DVD disc and press the Play button.

• For an explanation of Component video, see your DVD owner’s instructions.

How to Connect

PDP DVD Player

BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 25

Watching DTV

Component Cable

Audio Cable

DVI Cable

Power

Cord

Connect the cable or antenna to the antenna input jack on the DTV.

Connect the Y, Pb, Pr(COMPONENT) input jacks on the PDP with Y, Pb, Proutput jacks on

the DTV receiver using a component cable.

Connect the AUDIO L/R(COMPONENT) input jacks on the PDP with the AUDIO output jacks

on the DTV receiver using a audio cable

Note

•Please be sure to match the color coded input terminals and cable jacks.

To Watch DTV:

1. Turn on your PDP.

2. Press the SOURCE button to select “COMPONENT1”, “COMPONENT2” or “DVI”.

3. Turn on your DTV receiver.

• For an explanation of Component video, see your DTV receiver owner’s instructions.

How to Connect

Use a DVI-D connection cable. (sold separately)

PDP

DTV Receiver

BN68-00757A-X2Eng_002~027 7/26/04 4:45 PM Page 26

Autres manuels pour HP-P4271

Table des matières

Autres manuels Samsung Téléviseur plasma

Samsung

Samsung PA60H5000 Manuel utilisateur

Samsung

Samsung PS43D450 Manuel utilisateur

Samsung

Samsung PN42B400P3DXZA Guide de sécurité

Samsung

Samsung PN51D530A3F Mode d’emploi

Samsung

Samsung PN58C500G2FXZA Manuel utilisateur

Samsung

Samsung PN59D6500DF Manuel utilisateur

Samsung

Samsung 550 Series Manuel utilisateur

Samsung

Samsung HP-T5044 Manuel utilisateur

Samsung

Samsung PL42A440P1D Manuel utilisateur

Samsung

Samsung HPT4254X/XAA Manuel utilisateur

Samsung

Samsung series 6 650 Manuel utilisateur

Samsung

Samsung PL51E450A1F Guide de l'utilisateur

Samsung

Samsung 760 Series Manuel utilisateur

Samsung

Samsung PS-42C91HD Manuel utilisateur

Samsung

Samsung PS42A411C2 Manuel utilisateur

Samsung

Samsung PS-42C91HR Manuel utilisateur

Samsung

Samsung PS51E8090 Manuel utilisateur

Samsung

Samsung HPS5073X/XAA Manuel utilisateur

Samsung

Samsung PN43F4500AF Manuel utilisateur

Samsung

Samsung PN58B850Y1FXZA Manuel utilisateur

Samsung

Samsung PL43E400U1F Manuel utilisateur

Samsung

Samsung PL51E530A3F Manuel utilisateur

Samsung

Samsung BN68-02140A-00 Manuel utilisateur

Samsung

Samsung 5+ SERIES Manuel utilisateur

Manuels Téléviseur plasma populaires d'autres marques

Hitachi

Hitachi 50PD9800TA Manuel utilisateur

Pioneer

Pioneer PDP-LX508G Manuel utilisateur

LG 60PM9700 Manuel utilisateur

LG 50PX4D Manuel utilisateur

Panasonic

Panasonic Viera TH-37PA20 Manuel utilisateur

Panasonic

Panasonic TH-103PF12E Manuel utilisateur

Panasonic

Panasonic VIERA TH-42PZ80Q Manuel utilisateur

LG 60PA5500 Manuel utilisateur

Sony

Sony WEGA KE-P42M1 Manuel utilisateur

VESTEL

VESTEL PL2000 Manuel utilisateur

VisionQuest

VisionQuest PVQ-32VGB Manuel utilisateur

Maxent

Maxent MX-5020HPM Manuel utilisateur

XOCECO

XOCECO PH-42T8 Manuel utilisateur

Maxent

Maxent MX-42VM7 Manuel utilisateur

Sampo

Sampo PME-42S6 Manuel utilisateur

Hitachi

Hitachi 32PD7800 Manuel utilisateur

LG 50PK550 Manuel utilisateur

Haier

Haier P42A1-AK Manuel utilisateur