Samsung SyncMaster 320PX Manuel utilisateur

SyncMaster 320PX

Install Proqrams PDF Manuals R_istration

Model

SeJ_ot La_

Safety instructions

Introduction

Connections

Using the Software

Adjusting the LCD Display

Troubleshooting

Specifications

Information

Appendix

Select L_nguage Main Page

Safety Instructions

Notational

Power

installation

Clean

Others

#_t_oductior_

Conr_ectior_s

Uang the Software

Adjust ng the LCD Display

Troub eshooflr_ 9

Specificatior_a

#dormatior_

Appendix

SyncMaster

Mode_

The color end appearance of the product may vary depending on the model, and the product specifications are

subject to change without prior notice for reasons of performance enhancement.

Safety mnstructions

Notat ona

Please read the following safety instructions as they are designed to prevent damage to property and

harm to the user.

_ Warning /Caution

Failure to follow ddections noted by this symbol could result in bodily harm or damage to the

equipment

B Notational Conventions

Prohibited Impor[ant to read and understand at all times

Do not disassemble Disconnect the plug from the outlet

Do aottouch Ground to prevent an electric shock

Powe_

When not used for an extended period of time, set your computer to DPMS.

If using a screen saver, set it to active screen mode.

_'_

Do not use adamaged or loose plug.

® This may cause electric shock or fire

Do not pull the plug out by the wire nor touch the plug with wet

hands.

® This may cause electric shock or fire.

Use only aproperly grounded plug and receptacle.

® An improper ground may cause electricshockor equipment damage

Insert the power plug firmly so that it does not come loose.

Abad connection may cause fire

Do not excessively bend the plug and wire nor place heavy objects

upon them, which could cause damage.

® This maycause electricshockorfire

Do not connect too many extension cords or plugs to one outlet.

® This may cause fire.

Do not disconnect the power cord while using the LCD Display.

® A surge may be caused by the separation and may damage the LCD

Display

Do not use the power cord when the connector or plug is dusty.

® If the connector or plug of the power cord is dusty, clean it with a dry cloth

® Using the power cord with a dusb! plug or connector may cause an electric

shock or fire.

Ins tallation

Be sure to contact an authorized the Service Center, when installing your LCD Display in a location

with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and

where it operates for 24 hours such as at airports, train stations etc.

Failure to do so may cause serious damage to your LCD Display

Place your LCD Display in a location with low humidity and a

minimum of dust.

® Failure to do so may cause electric shock or fire inside the LCD Display

Donot drop the LCD Display when moving it.

® This may cause damage to the product or the person carrying it

Install the LCD Display base in ashowcase or shelf so that the end

of the base does not protrude from the showcase or shelf.

® Dropping the product may cause damage to the product or the person

carrying it

Do not place the product on an unstable or small surface area.

_, Placethe productonanevenandstablesurface,astheproductmayfall

and cause harm to someone walking by, specifically children.

Do not place the product on the floor.

Take care, as someone, specifically children may trip over it

Keep any flammable objects such as candles, insecticides or

cigarettes away from the product.

o Otherwise, this may cause the

Keep any heating devices away from the power cable.

® A melted coating may cause electric shock or fire

Do not install the product in places with poor ventilation, for

instance, a bookshelf, closet, etc.

® Any increase in the internal temperature may cause fire.

Put down the LCD Display carefully.

® Failing to do so may damage the LCD Display

Do not place the LCD Display face down.

® This may damage the TFT-LCD surface

The installation of the bracket must be done by aqualified

professional.

® Installing the bracket by unqualified personnel may result in injury.

® Always use the mounting device specified in the owner's manual

When installing the product, make sure to keep it away from the wall

(more than 10 cm /4 inches) for ventilation purposes.

® Poor ventilation may cause en increase in the internalternperatureofthe

p_oduct, resulting in a shortened component life and degraded

performance.

Keep the plastic packaging (bag) out of children's reach.

® The plastic packaging (beg) may cause suffocation if children play with it.

Clean

When cleaning the LCD Display case or the surface of the TFT-LCD screen, wipe with a slightly

moistened, sos fabric

Do not spray water or detergent directly onto the LCD Display.

® This rney cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.

If the connector between the plug and the pin is dusty or dirty, clean

it properly using adry cloth.

® A dirty connector may cause electric shock or fire

Make sure to unplug the power cord before cleaning the product.

® Otherwise, this may cause electric shock or fire

Unplug the power cord from the power outlet and wipe the product

using asoft, dry cloth.

o Do not use any chemicals such as wax, benzene, alcohol, thinners,

insecticide, air freshener, lubricant or detergent.

Contact the SAMSUNG customer care center or Customer Center for

interior cleaning once ayear.

® Keep the product's interior clean. Dust which has accumulated in the

interior over an extended period of time may cause a malfunction or fire.

Others

Do not remove the cover (or back),

® This may cause electric shock or fire

® Refer to a qualified sen,icing company.

If your LCD Display does not operate normally - in particular, if there

is any unusual sound or smell coming from the LCD Display -

unplug it immediately and contact an authorized dealer or the

Service Center.

o This maycause electricshockorfire

Keep the product away from places exposed to oil, smoke or

moisture; do not install inside a vehicle.

® This may cause a malfunction, electric shock or fire.

®In particular, avoid operating the LCD Display near water or outdoors where

the LCD Display could be exposed to snow or rain

If the LCD Display is dropped or the casing is damaged, turn the

LCD Display off and unplug the power cord. Then contact the

Service Center.

® The LCD Display may malfunction, causing electric shock or _re

Disconnect the plug from the outlet during storms or lightning or if

it is not used for a long period of time.

® Failure to do so may cause electric shock or fire.

Do not try to move the LCD Display by pulling only the wire or the

signal cable.

® This may cause a breakdown, electric shock or fire due to damage to the

cable.

Do not move the LCD Display right or left by pulling only the wire or

the signal cable.

® This may cause a breakdown, electric shock or fire due to damage to the

cable.

Do not cover the vents on the LCD Display cabinet.

® Bad ventilation may cause a breakdown or fire

Do not place water containers, chemical products or small metal

objects on the LCD Display.

® This may cause a malfunction, electric shock or fire.

® If a foreign substance enters the LCD Display, unplug the power cord and

contact the Service Center

Keep the product away from combustible chemical sprays or

inflammable substances,

® This rnaycause an explosion or fire.

Never insert anything metallic into the LCD Display openings.

® This may cause electric shock, fire or injury

Do not insert metal objects such as chopsticks, wire and tools or

inflammable objects such as paper or matches into the vent,

headphone port or AV ports or etc.

® This may cause electric shock or fire. If an alien substances or water enters

the product, turn the product off. unplug the power connector from the wall

outletandcontacttheSeP_dceCenter

i!!__i_L_..! i!

_i/iii_i_!_ii!ii_i!ii_ii!!_i!!_!iiiii!i_i:_i_ iiii

When viewing a fixed screen for an extended period of time, residual

image or blurriness may appear.

® Change the mode to energy saving re,ode or set a screensaver to a

changing picture when away from the LCD Display for an extended period

o1time

Adjusts the resolution and frequency to the level appropriate for the

model.

® An inappropriate resolution may cause undesirable picture quality.

32 inch (80 cm) -1360 X 768

Viewing the LCD Display continuously at a too close angle may

result in damage to your eyesight.

To ease eye strain, take at least afive-minute break after every hour

of using the LCD Display.

Do not install the product on an unstable, uneven surface or a

location prone to vibrations.

® Dropping the productmaycausedamagetotheproductortheperson

carrying it. Using the product in a location prone to vibrations may shorten

the lifetime of the product or may cause the product to catch fire

When moving the LCD Display, turn off and unplug the power cord.

Make sure that all cables, including the antenna cable and cables

connected to other devices, are disconnected before moving the

LCD Display.

® Failure to disconnect cables may damage it and cause fire or electric

shock.

Make sure there are more than two people when moving the

product.

® Droppingti_e productmay caasea malfunction or injury to the person

carrying it.

Place the product out of children's reach, as they could damage by

hanging onto it.

® A falling product may cause injury to tile person or even fatality.

When not using the product for an extended period of time, keep the

product unplugged.

® Otherwise, this may cause heat emission from the accumulated dirt or

degraded insulation, causing electric shock or fire

Do not place your children's favorite toys or any other objects of

interest on the product.

® Children may try to climb on lile product to retrieve an object. The product

could fall, causing injury or even fatality

When removing batteries from the remote control, be careful that

they are not swallowed by children, keep the batteries out of

children's reach.

®If the batteries are swallowed, see a doctor immediately

When replacing batteries, place the batteries in the correct +/-

polarity position as indicated on the battery holder.

® The incorrect polarity may cause a battery to break or leak and may cause

lira. injury> or contaminalion (damage)

Use only specified standard batteries. Do not use new and used

batteries together.

® This may cause a battery to break or leak and may cause fire, injury, or

contamination (damage).

The batteries (and rechargeabte batteries) is not ordinary refuse and

must be returned for recycling purposes. The customer is

responsible for returning the used or rechargeable batteries for

recycling purposes as the consumer.

® The customer can return used or rechargeable batteries to a nearby public

recyclingcenterortoastoresellingthesametypeofthebatteryor

rechargeablebattery.

Autres manuels pour SyncMaster 320PX

Autres manuels Samsung Moniteur

Samsung

Samsung SyncMaster S22B300B Manuel utilisateur

Samsung

Samsung S27B970D Guide de l'utilisateur

Samsung

Samsung SyncMaster 2494HM Manuel utilisateur

Samsung

Samsung 2233RZ - Syncmaster 22" 3D Gaming LCD Monito Guide de l'utilisateur

Samsung

Samsung SyncMaster 740N Plus Manuel utilisateur

Samsung

Samsung S24C570HL Manuel utilisateur

Samsung

Samsung PPM63M6H Manuel utilisateur

Samsung

Samsung SyncMaster 943BWT Guide de l'utilisateur

Samsung

Samsung TS DR Series Guide d'installation

Samsung

Samsung SyncMaster 400DX-3 Manuel utilisateur

Samsung

Samsung Samtron 74V Manuel utilisateur

Samsung

Samsung SyncMaster 2494HM Manuel utilisateur

Samsung

Samsung 920N - SyncMaster - 19" LCD Monitor Manuel utilisateur

Samsung

Samsung SyncMaster S23A950D Manuel utilisateur

Samsung

Samsung 740N - SyncMaster - 17" LCD Monitor Guide d'installation

Samsung

Samsung PDP-MONITOR (PLASMADISPLAYPANEL) Manuel utilisateur

Samsung

Samsung LH008IWJ Series Manuel utilisateur

Samsung

Samsung SyncMaster P63FP Manuel utilisateur

Samsung

Samsung SyncMaster 400PN Manuel utilisateur

Samsung

Samsung SyncMaster 2443DW Manuel utilisateur

Samsung

Samsung 214T - SyncMaster - 21.3" LCD Monitor Manuel utilisateur

Samsung

Samsung 2233BW - SyncMaster - 22" LCD Monitor Manuel utilisateur

Samsung

Samsung SyncMaster 700DX-3 Manuel utilisateur

Samsung

Samsung SyncMaster 943NW Guide de l'utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation