Samsung SHR-2XXX Guide de l'utilisateur
1
Using TZO.COM™Dynamic DNS and a D-Link™804-HV
router for Remote Viewing with your Samsung™SHR-
2XXX and SHR-4XXX Series DVR
This document explains how to best setup a Samsung™SHR series DVR using a Dynamic or
Static IP connection and TZO.COM™Dynamic DNS. This setup is based on a D-Link™4 port
wired router model 804-HV. In this document, you will learn how to:
·Login and setup the D-Link™804-HV Router with the TZO Dynamic DNS service
·Configure the D-Link™router to add services and open the ports needed for remote viewing and
administration of your Samsung™DVR (TCP Port 554-557 and UDP 8000-8159)
·Configure the IP address, gateway and DNS of the DVR so it works with the D-Link™router.
·Connect to your Samsung™DVR from any Windows based PC on the same network
·Connect to your Samsung™DVR from any REMOTE PC over the Internet using Smartviewer
software
·Troubleshooting your DVR if you are having trouble connecting
Please Note: The product names used in this document are for identification purposes only. All trademarks and registered
trademarks are the property of their respective owners.
BEFORE YOU BEGIN
SETUP THE ROUTER AND DVR ACCORDING TO THE MANUAL
-----------------------------------------------------------------------
Initial D-Link™router setup:
You should SETUP THE D-LINK™ROUTER for your Internet Connection according to the ISP and D-Link™
Manual. Make sure you can browse the Internet and use the Internet normally before you continue.
* If you use PPPoE DSL, make sure you set the CONNECT MODE to ALWAYS-ON under the WAN Settings
during configuration of the D-Link™Router.
Initial DVR Recording and Camera setup:
You should now setup the DVR for your preferences using the Manual/Guide that came with your DVR.
You do not need to setup the IP address on the DVR at this point, we cover that below to ensure the IP
is in the desired format for this document. If the DVR is already setup, continue below for details on
setting the IP address properly on the DVR.
2
Setting up the TZO Dynamic DNS
------------------------------------------------------------------------------------------
SIGNING UP AND ENABLING THE D-LINK™ROUTER WITH TZO DYNAMIC
DNS:
A) Make sure you are signed up with a trial account, or have paid for a TZO subscription (Standard or
Premier service) **If you do not have a TZO Key and Domain Name selected, sign up for a free 30 day
trial domain at http://YourDVR.tzo.com as shown below.
B) Enter your choice for a domain name (each location/DVR must be unique) and enter the email
address you wish to use. Click the CREATE MY FREE TRIAL DOMAIN NAME button and TZO will send
your TZO Domain Name and TZO key to the email address you used.
C) Once you have the TZO Key, Domain name and Email address used written down or available from
your email, log into your router by going to http://192.168.1.1 and using your username and password to
log into the router. (default username is admin and password is blank)
3
D) Once you are logged into the router, click the ADVANCED tab at the top. Under the ADVANCED
section, select DDNS from the left hand menu (blue buttons). As shown in the screenshot below, enable
the TZO Dynamic DNS service, and then input the Domain Name, TZO Key/Password and Email
Address/Username into the router DDNS setup. Click Apply. You now have setup the TZO DDNS
properly.
This domain name is good for 30 days for testing. After 30 days the TZO Dynamic DNS will expire. You
can purchase the TZO standard Dynamic DNS service for this domain name at
http://www.tzo.com/order.html before it expires. When ordering, use the email address you used when
signing up.
D-LINK™PORT FORWARDING AND OTHER ROUTER CONFIGURATION:
-----------------------------------------------------------------------------------------
*IMPORTANT NOTE before you start on PORT FORWARDING and Port Blocking:
* If DSL is being used for a broadband connection to your DVR, check with your ISP to make sure that
your DSL modem is in "bridge mode" to assure that there is no NAT server running on the DSL modem
itself. If this is the case, you will have extreme difficulty in port forwarding and getting the DVR to work.
You can call your ISP and ask if your DSL modem can be configured for Bridge mode and allow your
router to authenticate with the DSL signon routine instead of the DSL Modem.
Step 1) The first step is to log in to the router. Log into the router by going to http://192.168.1.1 and
using your username and password to log into the router. (default username and pw is admin/blank)
Step 2) Once you log into the router, Click the ADVANCED TAB in the top menu.
We need to add 2 sets of ports (TCP Port 554-557 and UDP 8000-8159) to the Virtual server section in
order to view the DVR remotely. These ports are added to the server list in 2 separate processes as
described below.
4
Step 3) In the list of Virtual Servers, we will add ports 554-557 first, then ports 8000-8159 in a second
process. In order to add a new service for ports 554-557, fill in the blanks as shown in the screenshot
below and then click the APPLY button.
Select Enabled
Name: DVR
Private IP: 200
Protocol: Both
Private Port: 554
Public Port: 557
Schedule: Always
This will add in the ports 554-557 as a service in the Virtual Server list. Repeat this for the additional
ports as shown in the steps below.
5
Step 4) In order to add a new service for ports 8000-8159, fill in the blanks as shown in the screenshot
below and then click the APPLY button.
Select Enabled
Name: DVR2
Private IP: 200
Protocol: Both
Private Port: 8000-8159
Public Port: 8000-8159
Schedule: Always
This will add in the service for ports 8000-8159 in the Virtual Server list.
6
Step 5) Check that your VIRTUAL SERVER LIST looks similar to the screenshot shown below.Your
VIRTUAL SERVER list will have many more services shown, but you should make sure that the DVR and
DVR2 services are listed as shown below, and that the ports and IP’s match exactly as shown in the
screenshot or the DVR remote viewing may not work. If it looks similar, you have completed the port
forwarding step and can now logout of the D-Link™(closing your browser)
Step 7) (Optional) –Enabling Remote Administration in the router can be a smart idea if you want to
remotely administer the router to open ports, change port forwarding, configure the TZO Dynamic DNS
and more. If you do not enable remote administration, you will have to login to the router locally.
*IMPORTANT: If you enable remote management, be sure to set a different password other than the
default password used in this document. You can also change the remote management port to a custom
port you select. Avoid ports 554-557 and 8000-8159, since these are used by the DVR.
Under the TOOLS TAB, scroll down to REMOTE MANAGEMENT and then setup the REMOTE
MANAGEMENT features as shown in the screenshot below. Using the D-Link™router, you can only set a
specific IP address to control from, so there is some limitation in this router for remote management.
7
CONNECTING THE DVR TO THE ROUTER AND ASSIGNING THE IP ADDRESS
-----------------------------------------------------------------------------------------
The first step in the whole process is to setup the DVR and the cameras. Consult your DVR manual for
setup details as explained at the beginning of this document.
Once the DVR is powered up and the cameras are setup, you should then connect the DVR to the router
using a standard RJ-45 ETHERNET cable. Once you connect the DVR to the router, you need to enter
the menu of the DVR by following the exact steps below:
1) On the Samsung™DVR’s, you push the MENU button –located on the upper right side of the DVR
front panel.
2) After you push the MENU button, the password menu screen comes up as shown below. Enter the
password (default is 4321) and press the ENTER key (round button in the middle of the cursor buttons)
8
3) You will now see a screen similar to the one shown below –this is the Menu Setup screen.
Use the cursor buttons to scroll down to the NETWORK setup. Once you select the NETWORK menu,
press the RIGHT cursor button
4) You should use the cursor buttons to scroll over to IP SETTINGS and then press the ENTER button
9
5) Now that you are in the IP SETTINGS setup menu as shown below, we need to edit the network
settings to match your router. Use the cursor buttons and enter button to scroll down, select and change
the IP address, and then adjust the gateway and DNS. Ding this will make sure your DVR’s Network and
IP settings are setup to work with your router. The important settings are listed below:
IP ADDRESS: 192.168.1.200
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
6) Once you have set the DVR to the IP settings above, you need to scroll down to the OK button and
press the ENTER button. One you are back in the MENU SETUP (the main setup menu) you can press
the MENU button to exit the setup.
10
CONNECTING TO YOUR SAMSUNG™DVR AND VIEWING LIVE AND
RECORDED VIDEO - (INTERNAL VIEWING ON THE SAME NETWORK)
------------------------------------------------------------------------------------------
Before you attempt to test the configuration from a remote location, you should perform some tests
internally (on the same network where the DVR is located) and attempt to connect to the DVR using the
Samsung™SMARTVIEWER software.
USING SMARTVIEWER REMOTE SOFTWARE TO CONNECT:
---------------------------------------------------------------------------
Using the SMARTVIEWER software that came with your DVR, you can connect to the DVR by going to the
INTERNAL IP address of the DVR.
Follow the steps below to connect with the SMARTVIEWER software:
Step 1) Run the SMARTVIEWER software. The first step is to add the internal remote site for viewing
the DVR. Once the SMARTVIEWER software opens, click in the lower right corner as shown in the
screenshot shown below (circled in red). Doing this will enter the SETUP where you need to add the
INTERNAL site.
*IMPORTANT! - DO NOT USE the TZO Domain name when connecting internally, in most cases the
domain name WILL NOT WORK from the internal network. Once you have tested the INTERNAL IP with
success, you can then try the domain name from a remote location.
Ce manuel convient aux modèles suivants
3
Autres manuels Samsung DVR
Samsung
Samsung SHR-3091 Manuel utilisateur
Samsung
Samsung SHR-5042 Manuel utilisateur
Samsung
Samsung SHR-2160 Manuel utilisateur
Samsung
Samsung SMT-190Dx Manuel utilisateur
Samsung
Samsung SVR-945 Manuel utilisateur
Samsung
Samsung SHR-5040 Manuel utilisateur
Samsung
Samsung SMT-H4372 Manuel utilisateur
Samsung
Samsung SVR-3200 Manuel utilisateur
Samsung
Samsung NETWORK DIGITAL VIDEO RECORDER Manuel utilisateur
Samsung
Samsung SDS-V4040 Manuel utilisateur
Samsung
Samsung SHR-5162 Instructions d'installation
Samsung
Samsung SRD-850DC Manuel utilisateur
Samsung
Samsung SRD-1630D Manuel utilisateur
Samsung
Samsung SRD-1650DC Manuel utilisateur
Samsung
Samsung SRD-852D Manuel utilisateur
Samsung
Samsung SVR-1650 Manuel utilisateur
Samsung
Samsung Optimum Manuel utilisateur
Samsung
Samsung SDH-P4080 Manuel utilisateur
Samsung
Samsung SRD-470 Manuel utilisateur
Samsung
Samsung SRD-470D Manuel utilisateur
