SAJ VM600 Manuel utilisateur

VM600

- 0 -

VM600 AC Drive

User Manual

Verion Code 6.0004.0538-00-VM600-E-V03-202107

VM600

- 1 -

Preface

Thank you for choosing VM600 Series AC Drive.

This user manual introduces the technical specifications, installation

instructions,

functions and performance of VM600 Series AC Drive properly.

Please read this

user manual carefully before carrying out works such as

installation,

commissioning, maintenance, etc.

You are specially warned to read and understand safety precaution items of

this manual before using this product, and to ensure that relevant electrical

installation testers’ professional qualification shall be in line with the provisions

of the labor supervision department, and the electrical and environmental

conditions

for product use shall bein conformity with relevant national standards.

Be sure to verify that the wiring is correct before powering on the product.

Before starting the product, it is necessary to debug to ensure correct motor

rotating direction.

During the installation, use and maintenance of the product, if you need to

consult the product's function, performance, other technical problems and safety

precautions, please contact the company's customer service center according to the

service hotline in this manual (please See the cover page of the manual).

Due to the continuous upgrade of the company's products, the content changes

without notice.

Guangzhou Sanjing Electric Co., Ltd.

VM600

- 2 -

CONTENTS

PREFACE......................................................................................... - 1 -

SAFETY PRECAUTIONS ............................................................... - 3 -

CHAPTER 1 PRODUCT INFORMATION..................................... - 6 -

1.1 TECHNICAL SPECIFICATIONS........................................................................ - 6-

1.2 PRODUCT NAMEPLATE ................................................................................. - 7-

1.3 MODEL DESCRIPTION................................................................................... - 7-

1.4 PRODUCT MODEL......................................................................................... - 8-

CHAPTER 2 INSTALLATION........................................................ - 9 -

2.1 OVERALL STRUCTURAL DRAWING（UNIT：MM）...................................... - 9-

2.2 TERMINAL CONNECTION............................................................................ - 10 -

CHAPTER 3 DISPLAYAND OPERATION.................................. - 12 -

3.1 KEYPAD..................................................................................................... - 12 -

3.2 DESCRIPTION OF INDICATORS AND KEYS.................................................... - 12 -

CHAPTER 4 PARAMETER FUNCTION..................................... - 13 -

4.1 FUNCTIONAL PARAMETER.......................................................................... - 13 -

4.2 MONITORING PARAMETERS ....................................................................... - 20 -

4.3 ERROR RECORDS....................................................................................... - 21 -

CHAPTER5 COMMUNICATION PROTOCOL.......................... - 22 -

5.1 COMMUNICATION CONTROL ADDRESS ...................................................... - 22 -

5.2 EEPROMADDRESSES INTRODUCTION...................................................... - 23 -

CHAPTER 6 TROUBLESHOOTING & COUNTERMEASURES - 24

6.1 FAULTS AND SOLUTIONS ............................................................................ - 24 -

6.2 COMMON FAULTS AND SOLUTIONS............................................................. - 26 -

CHAPTER 7 CONTECT SAJ........................................................ - 27 -

WARRANTY CARD............................................................................. - 28 -

VM600

- 3 -

Safety precautions

■ Warning sign

DANGER: Indicates that failure to comply with the notice will result in

severe personal injure or even death.

WARNING: Indicates that failure to comply with the notice will result in

moderate personal injury, property damage or equipment damage.

WARNING

◎Do not install or operate any AC Drive that is damaged or with missing parts.

Failing to follow this rule can result in facility damage or severe injury.

◎When installing or handling the AC Drive, please hold the bottom of the

product rather than the case only, to prevent its falling and being damaged.

◎Install the AC Drive on nonflammable material like metal, and keep away from

flammable or explosive object, heat source, and similar environment. Otherwise,

fire may be caused.

◎When AC Drive is installed inside an electrical cabinet or other kind of

enclosure, please install fans or other cooling devices, and keep ventilation well

enough to ensure the enclosure temperature below 40℃, or the AC Drive may be

damaged due to extreme high temperature.

◎Before wiring, ensure the AC Drive rated input voltage and phases are

compatible with the input power source, or fire or personal injury may be caused.

◎Never connect the AC power supply to output terminals U, V and W.

Otherwise, the AC Drive will be damaged and the warranty is invalid.

◎Never carry out withstand voltage test to the AC Drive, for example by a

megohmmeter. Otherwise, it may cause damage to the AC Drive.

◎The connecting cable of the main circuit terminal should use an insulating

sleeve.

◎When the cable length between the AC Drive and the motor exceeds 50

meters, an output reactor is recommended to be used.

VM600

- 4 -

◎Do not use a circuit breaker to control the start and stop of the AC Drive.

Otherwise, the AC Drive may be damaged.

◎Since the AC Drive makes the motor running speed from low to high in a short

time, please confirm that the motor and equipment are in the allowed running

range before running.

◎Do not touch due to high temperature of the heat sink and braking resistor.

◎The factory parameters of the AC Drive can meet the requirments of most

equipment operation. Under normal circumstances, please do not modify the AC

Drive parameters at will. Even if there is some special applications need to change

the AC Drive parameters, only necessary parameters could be changed.

Otherwise, AC Drive damage may be caused.

◎The PCB board has a CMOS integrated circuit. Do not touch it with your hands,

otherwise, static electricity will damage the PCB board.

DANGER

◎Wiring must be completed by qualified professional electricians, otherwise,

there may be electric shock or damage to the AC Drive.

◎The power must be disconnected during wiring; otherwise, it may cause electric

shock or fire.

◎The grounding terminal should be effectively grounded; otherwise, the outer

casing of the AC Drive may be energized.

◎Do not touch the main circuit terminals, otherwise, it may cause electric shock.

◎Terminals for brake resistor are (+) and PB. Do not wire to other terminals,

otherwise, fire may be caused.

◎It is only allowed to power on the AC Drive after the wiring is finished and its

cover is reinstalled. It is strictly prohibited to remove the cover of AC Drive while

power is on. Otherwise, it may cause electric shock.

◎Before programming the AC Drive with fault auto reset or restart option after

power off, the mechanical device need to be implemented with safety protection

measures first. Otherwise, personal injury will be caused.

VM600

- 5 -

◎“ STOP/RESET” key may become invalid as a result of some function setting.

It is recommended to install an independent emergency circuit breaker for the

AC Drive control system, otherwise, or personal injury may be caused.

◎When the power is on, there may be electricity in the AC Drive’s terminals

even if it is in stop mode. Do not touch U, V, W terminals and motor connection

terminals, or electrical shock may be caused.

◎Never touch the AC Drive connection terminals when power is on. Otherwise,

it may cause an electrical shock.

◎Only qualified electricians can be authorized to do the jobs of maintenance,

checking, or parts replacement.

◎After the power supply is OFF, make sure the charge LED is OFF and the

residual voltage does not exist, or wait for at least 10 minutes before carrying out

maintenance or inspection. Otherwise, damage or injury may be caused.

◎Modification to the AC Drive without permission is strictly prohibited,

otherwise, severe injury may be caused. Arbitrarily modification of AC Drive

will result in service warranty invalid.

VM600

- 6 -

Chapter 1 Product information

1.1 Technical specifications

Item

Specifications

Control

features

Control mode

V/F control

Startup torque

0.5Hz/100%

Speed range

1：50

Speed stability accuracy

±1%

Carrier frequency

1kHz ～6kHz；

Overload

capacity

60s for 150% of the rated current, 1s for 180% of the rated

current.

Torque

boost

0.0% ～30.0%

Input and

Output

Input voltage range

220V/380V; fluctuation range :±15%

Input frequency range

50/60Hz；fluctuation range :±5%

Output voltage range

0-input voltage; the error is less than 5%

Output frequency range

0-400Hz

Basic

function

Running command source

Three command source：keypad; control terminals; serial

communication port.

Frequency source

such as digital setting, analog voltage setting, analog current

setting, serial communication port setting.

DC braking

Braking time: 0.0s ～50.0s;

Braking action current value: 0.0% ～100.0%

Simple PLC/Multiple

speeds

It implements up to 8 speeds via the simple PLC function or

combination of DI terminal states.

Protection mode

Motor short-circuit detection at power-on, input/output phase

loss protection, overcurrent protection, overvoltageprotection,

undervoltage protection, overheat protection, overload

protection and so on.

Display

and Key

operation

LED display

It displays the parameters.

Parameters locking

function

It can lock the parameters to prevent malfunction.

Environ

ment

Installation location

Indoor, free from direct sunlight, dust, corrosive gas,

combustible gas, oil smoke, vapour, drip or salt.

Altitude

Lower than 1000m. When it is higher than 1000m, for every

VM600

- 7 -

Item

Specifications

100m, it needs to reduce power by 1%, and the maximum

altitude is 3000m.

Ambient temperature

-10℃～50℃. When it is higher than 40℃, for every 1℃, it

needs to reduce power by 1%, and the maximum ambient

temperature is 50℃

Humidity

≤95%RH, without condensing

Vibration

Less than 5.9m/s2 (0.6g)

Storage temperature

-25℃～+60℃

Table 1-1-1 Technical specification shee

1.2 Product nameplate

IP20

Product model

Power

Input specification

Output specification

Product barcode

Certification /

protection level

MODEL: VM600-2S1R5-E

POWER: 1.5kW

INPUT: 1PH AC 220V±15% 14A 50/60Hz

OUTPUT: 3PH AC 0-220V 7A 0-400Hz

S/N：

Figure 1-2-1 Product nameplate

1.3 Model description

VM600 –2 S 1R5GB

①②③④

Field

No.

Identification

Description

Product series

①

Product series

VM600 series

Voltagegrade

②

Voltagegrade

2：220VAC；4：380VAC

The input power

③

Power phase

identification

S: single ；T: three-phase

Rated power

④

Power range

1R5-1.5kW，R is the decimal point

Table 1-3-1 VM600 series model field comment

VM600

- 8 -

1.4 Product model

AC Drive Model

Rated

power

Power

capacity

Input

current

Output

current

Motor G/P

kVA

VM600-2SR75

0.75

1.5

8.2

0.75

VM600-2S1R5

1.5

14.2

1.5

VM600-2S2R2

2.2

9.6

2.2

VM600-4TR75

0.75

1.5

3.4

2.5

0.75

VM600-4T1R5

1.5

3.8

1.5

VM600-4T2R2

2.2

5.8

5.1

2.2

VM600-4T004

5.9

10.5

5.5

VM600-4T5R5

5.5

8.9

14.6

5.5

7.5

VM600-4T7R5

7.5

20.5

7.5

VM600-4T011

VM600-4T015

Table 1-4-1 Product model table

VM600

- 9 -

Chapter 2 Installation

2.1 Overall structural drawing（unit：mm）

W1 dD

Figure 2-1-1 Outline dimension diagram

AC Drive Model

Overall Dimensions

Mounting Hole

Mounting

Hole

Diameter

VM600-2SR75

134

104

123

VM600-2S1R5

VM600-2S2R2

142

116

130

VM600-4TR75

VM600-4T1R5

VM600-4T2R2

VM600-4T004

196

132

179

5.5

VM600-4T5R5

225

115

154

208

5.5

VM600-4T7R5

VM600-4T011

VM600-4T015

Table 2-1-1 outline dimension

Table des matières

Autres manuels SAJ Entraînement CC

SAJ

SAJ PDM20 series Manuel utilisateur

Manuels Entraînement CC populaires d'autres marques

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manuel utilisateur

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manuel de la liste des pièces

Chamberlain Garog

Chamberlain Garog D Series Manuel utilisateur

Parker

Parker PDS Series Manuel utilisateur

Festo

Festo DGC G Series Guide de configuration

Binks

Binks QS-5012-1-CE Manuel utilisateur

Danfoss

Danfoss VLT 2800 Series Fiche technique

ABB

ABB ACQ580-01 Series Manuel d'installation

YASKAWA

YASKAWA CANopen SI-S3 Manuel utilisateur

GE D20A6 Manuel utilisateur

Unex

Unex MC-D-250-1000-050W-TW Manuel utilisateur

Geckodrive

Geckodrive G213V Manuel utilisateur

ABB

ABB RSYC-01 Manuel utilisateur

Rockwell Automation

Rockwell Automation PowerFlex 700S Manuel du propriétaire

WEG

WEG DeviceNet CFW500 Manuel utilisateur

Siemens

Siemens SINAMICS G Fiche technique

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Mode d'emploi

SOMFY

SOMFY JR RU 30 Manuel utilisateur