RusAutomation SmartScan 25 Manuel utilisateur

SmartScan

User's Manual

for SmartScan 25/50

SmartScan User’s Manual

Important Notice

This manual is delivered subject to the following conditions

and restrictions:

!This manual contains proprietary information belonging

to Solid Applied Technologies Ltd. Such information is

supplied solely for the purpose of assisting explicitly and

properly authorized users of SmartScan.

!o part of its contents may be used for any other

purpose, disclosed to any person or firm or reproduced

by any means, electronic or mechanical, without the

express prior written permission of Solid Technologies

Ltd.

!The text and graphics are for the purpose of illustration

and reference only. The specifications on which they are

based are subject to change without notice.

!Information in this document is subject to change without

notice. Corporate and individual names and data used in

examples herein are fictitious unless otherwise noted.

SmartScan is a trademark of Solid Applied Technologies

Ltd.

Other company and brand products and service names are

trademarks or registered trademarks of their respective

holders.

Date Revision Software Version Catalog umber

May, 2011 2.2 5.06 -

2.05 -

3.08 -

680003D

Safety Guidelines

iii

Safety Guidelines

Please review the following points before installing and

operating the SmartScan system.

!SmartScan must be installed, connected and operated

according to the instructions in this Manual.

!If installed incorrectly or used for applications for which

it is not intended, application-related dangers may arise.

!Only qualified personnel are authorized to install and

operate SmartScan.

!When SmartScan is reopened, ensure that you replace

the O-ring, in order that the unit will remain sealed (for

IP67 units). The O-ring is suitable for one use only.

!Modifications and repairs to SmartScan are permissible

only when the manufacturer expressly approves them.

SmartScan User’s Manual

Table of Contents

Chapter 1: Introducing SmartScan............................................... 1

Sensor Dimensions ........................................................................................ 6

SmartScan 25 Specifications .......................................................................... 8

SmartScan 50 Specifications ........................................................................ 12

Sensor Recommendations............................................................................ 15

Sensor Cable Recommendations.................................................................. 16

Chapter 2: Installing SmartScan................................................. 19

Precautions ................................................................................................. 19

Installing the SmartScan Sensor .................................................................. 20

Threading Options................................................................................... 21

Sensor Positioning ................................................................................... 24

Installing the Sensor via an Extension Pipe .............................................. 26

Wiring the SmartScan Unit ......................................................................... 28

Wiring the Sensor Cable .......................................................................... 29

Wiring the Monitoring Cables.................................................................. 31

Wiring the Relays Cable .......................................................................... 32

Wiring VDC Power Cable........................................................................ 33

Wiring VAC Power Cable ........................................................................ 33

SmartScan 25 Intrensically Safe Connections........................................... 34

Chapter 3: asic Setup............................................................... 41

Using the SmartScan Function uttons ....................................................... 43

Modifying umerical Values ................................................................... 44

Table of Contents

Menu and Version Selection........................................................................ 45

Accessing the Main Menu ........................................................................... 46

Using the Main Menu .............................................................................. 47

Default Screen............................................................................................. 48

Setting Main Menu Options ........................................................................ 50

Setting the Indication Mode ..................................................................... 51

Setting the Measurement Unit.................................................................. 53

Setting the Relay Values for SmartScan 50 ............................................... 55

Setting the Relay Values for SmartScan 25 ............................................... 64

Setting the 20 mA/4 mA Levels ................................................................ 66

Setting the Flow Measurements ............................................................... 67

Setting the Tank Height............................................................................ 68

Setting the Application Type .................................................................... 70

Setting the Operation Modes ................................................................... 71

Setting the Scan Distance Values ............................................................. 74

Clearing the Scan Distance Values .......................................................... 77

Viewing Processor Information ................................................................... 77

Chapter 4: SmartScan Open Channels........................................79

Selecting the Flow Measurement Settings ................................................... 79

Open Channels Flow Measurements ........................................................... 81

Flume/Weir Types.................................................................................... 82

European Standard .................................................................................. 83

Rectangular Suppressed Sharp-crested Weir (Type 1) .............................. 83

Rectangular Contracted Sharp-crested Weir (Type 2)............................... 84

Trapezoidal (Cipolletti) Sharp-crested Weir (Type 3)................................ 85

V-notch (Triangular) Sharp-crested Weir (Type 4) .................................... 86

Khafagi-Venturi Flume (Type 5) ............................................................... 87

SmartScan User’s Manual

Parshall Flume (Type 6) ........................................................................... 88

Palmer Bowls Flume Trapezoidal Throat Cross-selection (Type 7) ........... 89

H Flume (Type 8)..................................................................................... 90

eyrpic Venturi Flume/Long-base Weir (Type 9) ..................................... 91

American Standard ................................................................................. 93

Rectangular Suppressed Sharp-crested Weir (Type 1) .............................. 93

Rectangular Contracted Sharp-crested Weir (Type 2)............................... 94

Trapezoidal (Cipolletti) Sharp-crested Weir (Type 3) ............................... 95

V-notch (Triangular) Sharp-crested Weir (Type 4) .................................... 96

Parshall Flume (Type 5) ........................................................................... 97

Palmer Bowls Flume Trapezoidal Throat Cross-selection (Type 6) ........... 98

H Flume (Type 7)..................................................................................... 99

Leopold Lagco Flume (Type 8) .............................................................. 100

Chapter 5: Additional Features ................................................ 101

Accessing the Additional Menu................................................................. 102

Setting Additional Menu Options.............................................................. 103

Selecting an Indication .......................................................................... 104

Manually Inserting Strapping Table Values ............................................ 106

Semi-automatic Inserting of Strapping Table Values .............................. 108

Inserting a Coefficient for Readings ....................................................... 110

Erasing Strapping Table Values .............................................................. 112

Defining 22mA/3.7mA Signal Error Messages........................................ 113

Entering Factor for Gas Compensation in SmartScan 25 ........................ 115

Table of Contents

vii

Chapter 6: SmartScan — Resetting configuration parameter....118

Chapter 7: Troubleshooting SmartScan ....................................119

Appendix A: SmartScan Ranges ................................................122

Appendix : Gas Factor Table for volume only ........................124

Appendix C: Flexible cable connector ......................................127

Index........................................................................................129

SmartScan User’s Manual

viii

Table of igures

Figure 1: Front View of SmartScan ........................................................3

Figure 2: Side View of SmartScan .......................................................... 3

Figure 3: Wall-mount Plate....................................................................4

Figure 4: ack View of SmartScan with Wall-mount Plate......................4

Figure 5: Panel Mount ...........................................................................5

Figure 6: Top View of SmartScan with Panel-mount Installation ............5

Figure 7: SmartScan Sensor Dimensions ................................................6

Figure 8: Sensor Threading Options.....................................................21

Figure 9: Sensor Positioning ................................................................ 24

Figure 10: Extension Pipe Installation .................................................. 26

Figure 11: Electrical Unit.....................................................................28

Figure 11a: Intrinsically Safe Connections ...........................................37

Figure 12: SmartScan Main Menu Screen............................................. 42

Figure 13: SmartScan Default Screen................................................... 48

Figure 14: Tank Height........................................................................ 68

Figure 15: Scan Distance Process.........................................................74

Figure 16: Rectangular Suppressed Sharp-crested Weir........................ 83

Figure 17: Rectangular Contracted Sharp-crested Weir........................ 84

Figure 18: Trapezoidal (Cipolletti) Sharp-crested Weir ........................85

Figure 19: V-notch (Triangular) Sharp-crested Weir............................. 86

Figure 20: Khafagi-Venturi Flume ........................................................87

Figure 21: Parshall Flume .................................................................... 88

Table of Figures

Figure 22: Palmer owls Flume Trapezoidal Throat Cross-selection..... 89

Figure 23: H Flume ............................................................................. 90

Figure 24: Neyrpic Venturi Flume ....................................................... 91

Figure 25: Long-base Weir .................................................................. 92

Figure 26: Leopold-Lagco Flume........................................................ 100

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels RusAutomation Instrument de mesure

RusAutomation

RusAutomation ULM-53 Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur