Ruckus Wireless ZoneFlex H500 Manuel utilisateur

Draft Published 11 December 2014, Part Number 800-70718-001 Rev A

H500 Access Point

Quick Setup Guide

This Quick Setup Guide provides step-by-step instructions on how

to set up your Ruckus Wireless H500 Dual Band 802.11ac

Multimedia Wi-Fi Access Point Wall Switch. After completing the

steps described in this Guide, you will be able to access the Wi-Fi

Wall Switch and begin providing wired and wireless network

access to users. The rest of this document refers to the H500

Access Point Wall Switch as the H500.

The H500 has many options:

• It can be mounted on a standard USA- or EU-style single-

gang wall outlet box.

• It can be powered by a customer-supplied IEEE 802.3af/at-

compliant PoE switch or injector, or can be powered by an

optional customer-ordered DC power adapter.

• It has side cutouts for one or two Ethernet bypass cables. The

mounting bracket has locating hooks to keep the bypass

cables aligned with the cutouts when attaching the H500 to

the mounting base.

• It can have a low-power (0.5W or less) customer-supplied

USB adapter plugged in. The USB adapter is very difficult to

remove after the H500 is attached to the mounting base.

ABOUT POWERING PERIPHERAL DEVICES

The H500 can supply power to USB and PoE-powered devices,

and the power supplied depends on the PoE power supplied to

the H500.

• The USB port is intended for low-power devices such as BLE

beacons. The maximum power that the USB port can supply

is 0.5W.

• The PoE port is intended for PoE-powered peripheral devices

such as IP telephones.

THIS GUIDE IN OTHER LANGUAGES

•请从以下网站获得该指南的简体中文版

https://support.ruckuswireless.com.

• Vous trouverez la version française de ce guide à l'adresse

suivante https://support.ruckuswireless.com.

•このガイドの日本語版は https://support.ruckuswireless.com

でご覧ください。

•이가이드의 한국어 버전은 웹사이트

(https://support.ruckuswireless.com)에서 확인하시기 바랍니

다.

• Veja a versão em português (Brasil) deste guia em

https://support.ruckuswireless.com.

• Puede ver la versión en español (América Latina) de esta guía

en https://support.ruckuswireless.com.

BEFORE YOU BEGIN

Before deploying Ruckus Wireless products, please check for the

latest software and the release documentation.

• User Guides and Release Notes are available at

http://support.ruckuswireless.com/documents.

• Software Upgrades are available at

http://support.ruckuswireless.com/software.

• Open Source information is available at

http://opensource.ruckuswireless.com.

• Software License and Limited Warranty are available at

http://support.ruckuswireless.com/warranty.

PACKAGE CONTENTS

• H500 Access Point Wall Switch

• Mounting bracket

• Two 10mm M3x0.5 thread Torx flat head machine screws

• Two 1” 6-32 thread Phillips pan head machine screws

• Product warranty statement

• Registration card

• Regulatory flyer

• Declaration of Conformity, if required

•ThisQuick Setup Guide

Note: The H500 requires Ruckus Wireless base image 100.0.1

firmware or later. Managed H500 deployments require RuckOS

for SmartCell Gateway (SCG) 3.1 or later, RuckOS for virtual

SmartCell Gateway (vSCG) 3.0 or later, or ZoneFlex (ZF) 9.10 or

later.

H500 Power Options and Available Power Out for PoE Out

and USB

H500 Power Source Power Available for PoE Out

and USB

802.3af PoE 5W total

802.3at PoE 12.95W PoE Out (802.3af

Class 3) and

0.5W USB

DC power adapter (sold

separately)

12.95W PoE Out (802.3af

Class 3) and

0.5W USB

Draft Published 11 December 2014, Part Number 800-70718-001 Rev A

STEP 1: COLLECT TOOLS AND SETUP

REQUIREMENTS

• No. 2 Phillips screwdriver and T10 Torx driver for the mounting

bracket screws

• A standard USA- or EU-style single-gang wall outlet box

• One of the following:

• Customer-supplied IEEE 802.3af/at-compliant PoE switch

and customer-supplied Ethernet cable

• Customer-supplied IEEE 802.3af/at-compliant PoE

injector and customer-supplied Ethernet cable

• Customer-ordered DC power adapter (Ruckus part

number 902-0170-XX10, sold separately)

• An Ethernet cable with or without PoE run through the wall

from your LAN through the wall outlet box

• (optional) One or two separate Ethernet bypass cables run

through the outlet box

• A computer with an Ethernet port and a wireless card

• One Cat 5e or better Ethernet cable

STEP 2: CONNECT THE COMPUTER TO THE H500

Figure 1: Top view

1After removing your H500 from its package, place it next to

your computer.

2Using an Ethernet cable, connect your computer’s network

port to the PoE In port on the back of the H500.

3Using an AC adapter (sold separately), connect the H500

12VDC port to a protected power source.

Alternatively, connect the PoE port to a PoE injector or switch

for both power and network connections.

4Verify that the Power LED on the external enclosure is a steady

green.

Figure 2: Back view

STEP 3: PREPARE YOUR COMPUTER FOR H500

SETUP

1On your Windows 7 computer, configure your network

adapter from the Local Area Connection settings as follows:

• Start > Control Panel > Network and Sharing

Center > Change Adapter Settings

2Edit the TCP/IPv4 address settings as follows:

• Local Area Connection > Properties > Internet

Protocol Version 4 (TCP/IPv4) > Properties

The TCP/IPv4 Properties dialog box appears.

3Select Use the following IP address (if it is not already

selected) and then make the following entries:

•IP address: 192.168.0.22 (or any address in the

192.168.0.x network, except 192.168.0.1)

•Subnet mask: 255.255.255.0

•Default gateway: 192.168.0.1

Leave the DNS server fields empty.

4Click OK to save your changes.

Your changes are put into effect immediately.

PoE In Port

12VDC Port

Note: The following procedures assume Windows 7 as the

operating system. Procedures for other OS’s are similar.

Important! Write down all of the currently active settings so you

can restore your computer to its current configuration later

(when this process is complete).

Draft Published 11 December 2014, Part Number 800-70718-001 Rev A

STEP 4: LOG INTO THE H500 ACCESS POINT

As specified in Step 3: Prepare Your Computer for H500 Setup,

the H500 should be directly connected to your computer (through

the PoE In Ethernet port on the back of the H500) and powered

on, ready for setup.

1On your computer, open a Web browser window.

2In the browser, type this URL to connect to the H500:

https://192.168.0.1

3Press <Enter> to initiate the connection. When a security alert

dialog box appears, click OK/Yes to proceed.

4When the Ruckus Wireless Admin login page appears, enter

the following:

•Username: super

•Password: sp-admin

5Click Login.

STEP 5: CUSTOMIZE THE WIRELESS SETTINGS

1On the Web interface menu, click Configuration > Radio

2.4G or Configuration > Radio 5G. The Configure >

Wireless > Common page appears.

2Verify that the following options are active:

•Channel: SmartSelect.

•Country Code: If you are not located in the United States

of America, select your current country.

3Click Update Settings if you made any changes.

4Click any of the “Wireless #” (Wireless LAN Number) tabs at

the top of the page.

5In Wireless Availability, click Enabled.

6Delete the text in the SSID field, then type a name for your net-

work that will help your users identify the H500 access point in

their wireless network connection applications.

7Click Update Settings to save your changes.

8Repeat Steps 4-7 for each Wireless # (Wireless LAN Number)

interface that you want to enable.

9Click Logout to exit the Web interface.

10 When the Ruckus Wireless Admin login page reappears, you

can exit your browser.

11 Disconnect the computer from the H500 and from the power

source, and then restore your computer to its original network

connection configuration.

Continue with Step 6: Mounting Bracket on an Outlet Box.

STEP 6: Mounting Bracket on an Outlet Box

Figure 3: Mounting bracket

1Use either the original wall outlet box screws or the factory-

supplied 1” Phillips pan head machine screws to attach the

H500 mounting bracket to a single-gang wall outlet box.

2Pull the uplink Ethernet cable for the H500 from the LAN

through the wall outlet box.

3When you are powering the H500 with a customer-ordered

DC power adapter, pull the power cable from the adapter

through the wall outlet box.

4When you have extra Ethernet cables (usually one or two) that

are to bypass the H500, pull them through the wall outlet box.

Drape the bypass Ethernet cables across one or both of the

upper hooks on the mounting bracket.

Continue with Step 7: Attaching the H500 to the Mounting

Bracket.

Default H500 Access Point Settings (for your reference)

Network Names (SSIDs) Wireless1-Wireless8 (2.4GHz

radio)

Wireless9-Wireless16 (5GHz

radio)

Security (Encryption method) Disabled for each wireless

interface

Default Management IP

Address

192.168.0.1

Optional: In a default H500 configuration, the H500 uses a

DHCP-assigned IP address.

If you anticipate logging into the H500 regularly to perform

monitoring or maintenance once it is in place, then you may want

to consider switching from DHCP and instead assigning a static

IP address to the H500.

A. On the menu, click Configuration > Internet.

B. Click the Static IP option.

C. Fill in the IP Address and Mask fields.

D. Click Update Settings to save your changes.

Note: The H500 mounting bracket has four hooks that face UP.

Make sure that the hooks are facing up when attaching the

mounting bracket to the wall outlet box.

Draft Published 11 December 2014, Part Number 800-70718-001 Rev A

STEP 7: ATTACHING THE H500 TO THE MOUNTING

BRACKET

1Make sure that the mounting bracket is securely fastened as

described in Step 6: Mounting Bracket on an Outlet Box.

2If you have bypass Ethernet cables (usually one or two, if any),

then make sure that they are draped across one or both of the

two upper hooks on the mounting bracket.

Figure 4: Attaching the H500 to the Mounting Bracket

3If you are installing a customer-supplied USB adapter, then

plug it securely into the USB jack on the bottom of the H500.

4Pull the uplink Ethernet cable from your LAN through the outlet

box, and plug it into the back of the H500.

5The mounting bracket has two lower hooks that fit into slots

on the bottom of the H500. Rest the bottom of the H500 on

those hooks, and then tilt the H500 until it is up against the

mounting bracket.

Note that any optional bypass Ethernet cable(s) should slide

smoothly into the slots on the sides of the H500.

6Use a T10 Torx driver to screw the factory-supplied Torx flat

head machine screws through the H500 screw holes into the

threaded inserts on the sides of the mounting bracket.

7After the H500 has powered on, it supplies USB power and

PoE Out as described in About Powering Peripheral Devices.

Continue with Step 8: Testing the H500 Operation.

STEP 8: TESTING THE H500 OPERATION

After a short pause to re-establish the Internet connection, you can

test the H500.

1Using any wireless-enabled computer or mobile device,

search for and select the wireless network you previously con-

figured.

2If you can connect, open a browser and navigate to any public

Web site.

3Using any wired computer or other device and an Ethernet

cable, plug into an Ethernet port on the bottom of the H500.

4Open a browser and navigate to any public Web site.

5Repeat Step 3 and Step 4 for the rest of the Ethernet ports on

the bottom of the H500.

6Verify that all connected PoE-powered devices and USB

adapters are working correctly.

Congratulations! Your H500 is active and ready for use.

To be determined.

Autres manuels pour ZoneFlex H500

Autres manuels Ruckus Wireless Point d'accès sans fil

Ruckus Wireless

Ruckus Wireless SC8800-S Manuel d'instructions d'installation

Ruckus Wireless

Ruckus Wireless ZoneFlex 7982 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 7762 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex R300 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 7982 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless R720 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 7372 Guide de configuration

Ruckus Wireless

Ruckus Wireless SmartCell Gateway 200 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 7762-T Manuel utilisateur

Ruckus Wireless

Ruckus Wireless R730 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 7982 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex R500 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex series Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 2942 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 2741 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless C110 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZONEFLEX R310 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless Unleashed H320 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 7441 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 901-T504-US31 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 2741 Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZF7762-AC Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex 7761-CM Manuel utilisateur

Ruckus Wireless

Ruckus Wireless ZoneFlex R710 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur