Rubbermaid 1W21 Manuel utilisateur

Congratulations and thank you for purchasing a Rubbermaid storage building.

BEFORE YOU BEGIN – BUILDING CODES

Be sure to check your local building codes, ordinances and restrictions, and applicable neighborhood governances.

BEFORE YOU BEGIN – SURFACE PREPARATION

To ensure proper assembly and performance your shed needs to be built on a solid, level surface.

A concrete or patio surface, or a treated-wood platform is recommended.

BEFORE YOU BEGIN – LOCATION

When choosing a location in your yard make sure you choose an area with easy access and one that provides proper

drainage for water to run away from the shed location.

BEFORE YOU BEGIN – PREASSEMBLY

Thoroughly review all assembly steps (it is important that the steps are followed in the correct order).

Review the parts list and make sure that no parts are missing.

IMPORTANT – DO NOT

RETURN TO THE STORE

For assistance with your Rubbermaid

Storage Building or for additional

product information call our toll-free

Consumer Service number:

1-888-895-2110

M–F: 8:30 a.m. to 5:00 p.m. EST

or visit us online at:

www.rubbermaid.com.

Installation Steps:

1. Site Preparation

2. Floor

3. Walls

4. Roof & Doors

5. Finishing

76 ¾"

75 ½"

55 ¼"

2027618

Note: Be sure to keep this instruction manual and your original store receipt to ensure our Consumer Service Department

can accurately and quickly assist you if necessary.

1W21

Description Part Number Assembly Letter Quantity Required Tools Two Person Assembly

Floor

Front Floor 5L01 A1

Repeat Floor 5L11 B2

Walls

Repeat Left Side 5L12 C2

Left Back 5L04 D1

Repeat Right Side 5L13 E2

Right Back 5L05 F1

Front Left Side 5L02 G1

Front Right Side 5L03 H1

Wall Connector 1V62 WC 25

Doors

Left Door 1W23 L1

Right Door 1W24 K1

Door Handle 5L74 T2

Lock Hasp 5F58 X1

Hardware

#14 x 3/4" Combo Pan Head Screw AA 60*

Roof Pin NP 5J22 FF 8

Roof Pin Assembly Tool M3 5J22 GG 1

Accessory Bracket 5H88 12

Roof

Front Roof 5L08 J1

Repeat Roof 5L14 M2

Roof Brace 5L36 RB 3

Safety

Glasses

Phillips Screwdriver

Rubber Mallet

Liquid

Soap

(2) Step Stools/

Stepladders

Drill

Gloves

1/8" Drill Bit

Phillips Bit

1W21

PREASSEMBLY:

• Review ALL assembly steps before beginning construction.

• Review the parts list and make sure that no parts are missing.

NOTE:

• To simplify assembly and to ensure proper engagement of all components,

apply a mild detergent to dovetail and snap ﬁts before assembling.

TFFx8

RB RB RB

WCx25

* Extra screws are supplied

76 ¾"

75 ½"

55 ¼"

Build a solid, level surface for the shed foundation. Consult your local

building authority for ordinances, restrictions, or permits required

before building any structure at your home.

Note: Minimum dimensions for foundations shown.

FLOOR PLAN:

Size the construction site to ﬁt the entire ﬂoor.

OPTIONAL STEP:

If desired, recessed anchor locations (11 places)

can be used to anchor the shed ﬂoor to a foundation

after you have constructed one.

55¼"

75½"

1.0 Site Preparation

"18

~4-15/16"

"24

"~23-9/16

"24 "24 "~3-5/8

~3-5/8"

"~5

"~75-1/2

120.0°

"24-7/8

"~55-1/4

ANCHOR

LOCATIONS

CARE & USE

• Shed can be cleaned with water and mild detergent as

necessary. DO NOT USE ABRASIVE DETERGENTS,

MATERIALS OR CLEANING TOOLS.

• To maximize your shed’s performance, remove

excessive snow and/or leaf accumulation from the roof.

• In the event of severe weather, please disassemble

and store in a secure location.

CAUTIONS

Maximum opening

CAUTION: Always use eye protection/safety glasses

during assembly.

CAUTION: When installing screws, do not overtighten.

CAUTION: Drill only through initial panel wall, unless

otherwise indicated.

2.0 Floor Installation

Using a rubber mallet and screwdriver, knock out the

tabs for the door hinge, 2 places on Front Floor (A).

b. Drill pilot hole through top surface of ﬂoor, 2 places on Front

Floor (A). CAUTION: Drill through top surface of ﬂoor only!

Using a rubber mallet and screwdriver, punch out the screw holes

along the connection edge of both Repeat Floors (B).

2.1 Floor Installation

Connect and align back position Repeat Floor (B) to middle position Re-

peat Floor (B) and install Screws (AA) 9 places; keep panels aligned and

even while installing screws.

Connect and align middle position Repeat Floor (B) to Front Floor (A) and install

Screws (AA) 9 places; keep panels aligned and even while installing screws.

AA (9)

HELPFUL HINT: Pilot holes may be drilled for the screws using a 1/8" drill bit.

CAUTION: Do not overtighten screws.

AA (9)

HELPFUL HINT: Pilot holes may be drilled for the screws using a 1/8" drill bit.

CAUTION: Do not overtighten screws.

3.0 Wall Panel C Installation

Using a screwdriver, punch out the screw holes on the top

of Repeat Left Side (C) 2 places.

Snap Repeat Left Side (C) into the back position

Repeat Floor (B).

Screw Holes

ALIGN

click

Hold Repeat Left Side (C) upright to prevent it from

falling (until Left Back (D) is installed).

OVERHEAD VIEW

DETAIL 3-1_B

SCALE 1/1

DETAIL 3-3_E

SCALE 1/1

DETAIL 3-3_B

SCALE 1/1

DETAIL 3-4_B AND 3-5_B

SCALE 1/1

DETAIL 3-6_B AND 3-7_B

SCALE 1/1

3.1 Wall Panel D Installation

Connect Left Back (D) into dovetails of Repeat Left Side (C).

b. Engage snaps on bottom of Left Back (D) into

Repeat Floor (B).

Using a screwdriver, punch out the screw holes on the top

of Left Back (D) 4 places.

Screw Holes

HELPFUL HINT: Lubricate dovetails with liquid soap.

click

ALIGN

3.2 Wall Panel E Installation

Snap Repeat Right Side (E) into the back position of

Repeat Floor (B).

b. Hold Repeat Right Side (E) upright to prevent it from

falling (until Right Back (F) is installed).

Using a screwdriver, punch out the screw holes on the top

of Repeat Right Side (E) 2 places.

Screw Holes

ALIGN ALIGN

click click

3.3 Wall Panel F Installation

Connect Right Back (F) onto dovetails of Repeat Right

Side (E).

Align the lap joint between Left Back (D) and Right Back (F).

b. Engage snaps on bottom of Right Back (F) into

Repeat Floor (B).

Using a screwdriver, punch out the screw holes on the top

of Right Back (F) 4 places.

Screw Holes

DETAIL 3-1_B

SCALE 1/1

DETAIL 3-3_E

SCALE 1/1

DETAIL 3-3_B

SCALE 1/1

DETAIL 3-4_B AND 3-5_B

SCALE 1/1

DETAIL 3-6_B AND 3-7_B

SCALE 1/1

HELPFUL HINT: Lubricate dovetails with liquid soap.

OVERHEAD

VIEWS

DETAIL 3-1_B

SCALE 1/1

DETAIL 3-3_E

SCALE 1/1

DETAIL 3-3_B

SCALE 1/1

DETAIL 3-4_B AND 3-5_B

SCALE 1/1

DETAIL 3-6_B AND 3-7_B

SCALE 1/1

D F

Align Lap Joints

click

ALIGN

Install Wall Connector (WC) 5 places, connecting Left Back and Right Back Panels (D and F).

Position connectors in slots and slide down to snap in place.

click

3.4 Wall Panel C (Repeat Left Side) Installation

Using a screwdriver, punch out the screw holes on the top

of Repeat Left Side (C) 2 places.

OVERHEAD VIEW

D F

Install Wall

Connectors

Table des matières

Langues :

Autres manuels Rubbermaid Entreposage extérieur

Rubbermaid

Rubbermaid 3746 Manuel utilisateur

Rubbermaid

Rubbermaid 1S84 Manuel utilisateur

Rubbermaid

Rubbermaid 2U84 Manuel utilisateur

Rubbermaid

Rubbermaid 3748 Manuel utilisateur

Rubbermaid

Rubbermaid 5L40 Manuel utilisateur

Rubbermaid

Rubbermaid 5L30 | 7T54 Manuel utilisateur

Rubbermaid

Rubbermaid 1Q05 Manuel utilisateur

Rubbermaid

Rubbermaid 5H80 Manuel utilisateur

Rubbermaid

Rubbermaid 1W19 Manuel utilisateur

Rubbermaid

Rubbermaid 5L45 Manuel utilisateur

Rubbermaid

Rubbermaid 1V30 Manuel utilisateur

Rubbermaid

Rubbermaid 5L30 Manuel utilisateur

Rubbermaid

Rubbermaid 3747 Manuel utilisateur

Manuels Entreposage extérieur populaires d'autres marques

USP

USP DURAMAX 10 Ft x 8 Ft StoreMax Plus Manuel utilisateur

TYGO

TYGO Nyland Manuel utilisateur

Duratuf

Duratuf GL105 Manuel utilisateur

Viking

Viking SD5300SS Manuel technique

USP

USP DURAMAX Apex Pro 10.5 Ft x 8 Ft 40116 Manuel utilisateur

ModuLaro

ModuLaro Lojo WC202200 Manuel utilisateur

Lifetime

Lifetime 6418 Manuel utilisateur

rollaway container

rollaway container ARPCA24 Manuel utilisateur

Duratuf

Duratuf Havelock Manuel utilisateur

X-METAL

X-METAL 4065 Manuel utilisateur

Outdoor Life Products

Outdoor Life Products FP2030 F Manuel utilisateur

Royalcraft

Royalcraft Faro 295L Storage Box Manuel utilisateur

Riverlea

Riverlea Duratuf KIWI KS3 Manuel utilisateur

OLT

OLT GS84D-FJ-Plywood Manuel utilisateur

garofalo

garofalo TUSCANY EVO Manuel utilisateur

Duratuf

Duratuf Kiwi MK1 Manuel utilisateur

Eden

Eden CA2988 Manuel utilisateur

Palram

Palram CANOPIA RUBICON 6x10 Guide de l'administrateur