RTI It's Under Control CB-8 Mode d'emploi

1
It’s Under Control®
CB-8
Installation and Operation Guide
70-210044-18 V1.0
Connecting Block
It’s Under Control®

Connecting Block
CB-8
2

3
It’s Under Control®
Remote Technologies Incorporated warrants its products for a period of one
(1) year from the date of purchase from Remote Technologies Incorporated
or an authorized Remote Technologies Incorporated distributor.
This warranty may be enforced by the original purchaser and subsequent
owners during the warranty period, so long as the original dated sales
receipt or other proof of warranty coverage is presented when warranty
service is required. Except as specied below, this warranty covers all
defects in material and workmanship in this product. The following are not
covered by the warranty:
Damage resulting from:
1. Accident, misuse, abuse, or neglect.
2. Failure to follow instructions contained in this Guide.
3. Repair or attempted repair by anyone other than Remote Technologies
Incorporated.
4. Failure to perform recommended periodic maintenance.
5. Causes other than product defects, including lack of skill, competence
or experience of user.
6. Shipment of this product (claims must be made to the carrier).
7. Being altered or which the serial number has been defaced, modied
or removed.
Remote Technologies Incorporated is not liable for any damages caused by
its products or for its failure of its products to perform, including any lost
prots, lost savings, incidental damages, or consequential damages.
Remote Technologies Incorporated is not liable for damages based upon
inconvenience, loss of use of the product, loss of time, interrupted
operation, commercial loss, any claim made by a third party or made by
you for a third party.
Remote Technologies Incorporated’s liability for any defective product is
limited to repair or replacement of the product, at our option.
If your CB-8 Connecting Block needs service, please contact Remote
Technologies Incorporated by telephone, fax or E-mail for return
information. Please do not return products to Remote Technologies
Incorporated without return authorization.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated without the prior written notice of Remote
Technologies Incorporated.
The information contained in this document is subject to change without
notice. Remote Technologies Incorporated shall not be liable for errors or
omissions contained herein or for consequential damages in connection
with the furnishing, performance, or use of this guide.
CB-8 and the RTI logo are registered trademarks of Remote Technologies
Incorporated.
LIMITED WARRANTY AND DISCLAIMER

Connecting Block
CB-8
4
Read Instructions. Read all safety and operating instructions before
operating the unit.
Retain Instructions. Keep the safety and operating instructions for
future reference.
Heed Warnings. Adhere to all warnings on the unit and in the
operating instructions.
Follow Instructions. Follow operating instructions and instructions
for use.
Heat. Keep the unit away from heat sources such as radiators, heat
registers, stoves, etc., including ampliers that produce heat.
Power Sources. Connect the unit only to a power supply of the type
described in the operating instructions, or as marked on the unit.
Power Cord Protection. Route power supply cords so that they are
not likely to be walked on or pinched by items placed on or against
them, paying particular attention to the cords at plugs, at convenient
receptacles, and at the point at which they exit from the unit.
Water and Moisture. Do not use the unit near water—for example,
near a sink, in a wet basement, near a swimming pool, near an open
window, etc.
Object and Liquid Entry. Do not allow objects to fall or liquids to be
spilled into the enclosure through openings.
Servicing. Do not attempt any service beyond that described in
the operating instructions. Refer all other service needs to qualied
service personnel.
Damage Requiring Service. The unit should be serviced by qualied
service personnel when:
Objects have fallen or liquid has been spilled into the unit.
The unit has been exposed to rain.
The unit does not appear to operate normally or exhibits a
marked change in performance.
The unit has been dropped or the enclosure has been damaged.
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
SAFETY SUGGESTIONS

5
It’s Under Control®
Limited Warranty and Disclaimer ...............................3
Safety Suggestions......................................................4
Contents......................................................................5
Chapter 1 - Welcome ...................................................7
Important Notes ...................................................... 7
Product Contents ..................................................... 8
Chapter 2 - Features.................................................... 9
Chapter 3 - Installation and Operation .......................13
Chapter 4 - Specications...........................................15
Chapter 5 - Troubleshooting.......................................17
Chapter 6 - Service and Support.................................19
Index ......................................................................... 21
TABLE OF CONTENTS

Connecting Block
CB-8
6

7
It’s Under Control®
Thank you for using the CB-8 Connecting Block.
The CB-8 is an installation accessory designed to provide convenient
and reliable power connections for up to eight (8) RTI in-wall keypads,
touchpanels and other devices. In addition to providing power, the CB-8
combines and routes the infrared outputs from the touchpanels to a single
output for connection to an RTI control processor. Multiple CB-8 units
can be daisy-chained for connecting more than eight devices. A 4.3 Amp,
16VDC power supply is included.
IMPORTANT NOTES
Please read these important notes about the CB-8:
The CB-8 should be placed in an area where it is around normal room
temperature (between 60°F to 90°F).
Avoid installing the CB-8 in a location where it can come in contact
with direct sunlight.
Do not let the CB-8 get wet. It should not be handled with wet hands
or placed in an area where it could get wet.
Do not subject the CB-8 to smoke, dust, or vibrations.
Only use the power supply that is specied for the CB-8. Using the
wrong type of power supply may result in damage.
Do not disassemble the unit. Service of the CB-8 should be performed
by authorized personnel only.
CHAPTER 1 | WELCOME

Connecting Block
CB-8
8
Contents within the box include the following items:
One (1) CB-8 connecting block
One (1) Installation and Operation Guide
One (1) Power supply
One (1) Power cord
One (1) Cat-5 patch cable
UNPACKING AND INSPECTION
After unpacking your new CB-8 Connecting Block, save all of the packing
materials in case you ever have to ship the unit.
Thoroughly inspect the CB-8 and packing materials for signs of damage.
Report any damage to the carrier immediately. Report any equipment
malfunctions to RTI or an authorized RTI distributor.
CHAPTER 1 | PRODUCT CONTENTS

9
It’s Under Control®
The CB-8 provides superior quality and reliability as well as these specic
features:
Provides power connections for up to eight (8) RTI devices such as in-
wall touchpanels and certain RS-485 controllable devices.
Combines and routes infrared outputs from touchpanels to a single
output.
Enables communication between RTI Control Processors and devices
via RS-485.
Multiple CB-8 units can be daisy-chained to connect more than eight
RTI in-wall touchpanels or devices.
CHAPTER 2 | FEATURES
Inputs Loop In
Loop OutPower Indicator Output

Connecting Block
CB-8
10
Autres manuels pour It's Under Control CB-8
1
Table des matières
Autres manuels RTI Système de contrôle


















