Rosewill RHMS-11002 Manuel utilisateur

Dual Arm Monitor Stand for LCD/LED Displays

RHMS-11002

User Manual

Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002 User Manual

1

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS

PRODUCT

Specifications

　◆Weight capacity-DO NOT EXCEED: 9*2=18 kg (40 lbs) includes monitor and allaccessories.

　◆Minimum surface thickness: 0.6 ''. (15mm)

　◆Maximum surface thickness: 3.3 ''. (84mm)

　◆Raise/Lower: 11.8 '' (300mm)

　◆Extension: 11.8'' (300mm)

　◆Level: ±180°

　◆Swivel: ±5°

　◆Tilt: ±15°

CAUTION: Avoid potential personal injuries and property damage!

　Do not use this product for any purpose not explicitly specified by manufacturer.

　If you do not understand these instructions, or have doubts about installation, disassembly or use of this product, contact

manufacturer customer Service.

　Manufacturer is not responsible for any damage or injury caused by incorrect assembly or useage

Supplied Parts and Hardware Kit

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer but

please contact Sunnyford Systems Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002 User Manual

2

Step 1 –Attach base assembly to desk

A : Desk Clamp 0.6＂（16mm）＜board depth <2.75＂(70mm)

Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002 User Manual

3

B : Through-Desk 1＂(25.4mm)diameter<=2.95＂(75mm)

You need disassemble the base［02］assembly at first ,then assembling again according to the

following pic

C: Grommet Hole 2.95＂(75mm)<=hole diameter<=3.9＂(100mm)

Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002 User Manual

4

D: Side Mount board depth >2.95＂（75mm）and no mount hole

Step 2 –Insert the mount arm[02] to base[01]

WARNING:TIGHTENING TORQUE[01-d] BEFORE INSERT THE MOUNT

Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002 User Manual

5

Step 3 –Lcd mornitor assembling

Insert the hand screw [08],through the mount board[01-a] , into the threaded hole in the back

of the monitor and lock it.

Step 4 –Adjusted the rotating friction

As following chart ,adjusting the tightness of head,middle and base location, insert the

attached wrench [0A]into the lock screw to keep proper friction during rotation .

Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002 User Manual

6

Step5 –Cables placement

Route the cables through the clip [02-b] under the arm and [01-c] on the pole

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future support for your product.

Autres manuels Rosewill Support et étagère

Rosewill

Rosewill RHMS-11003 Manuel utilisateur

Rosewill

Rosewill RMS-SWM01 Manuel utilisateur

Rosewill

Rosewill RMS-MT5010 Manuel utilisateur

Rosewill

Rosewill RSR-2P6U001 Manuel utilisateur

Rosewill

Rosewill RMS-MT3710 Manuel utilisateur

Rosewill

Rosewill RMS-A660 Manuel utilisateur

Rosewill

Rosewill RMS-SDM01 Manuel utilisateur

Rosewill

Rosewill RMS-A520 Manuel utilisateur

Rosewill

Rosewill RMS-MF2720 Manuel utilisateur

Rosewill

Rosewill RMS-A871 Manuel utilisateur

Rosewill

Rosewill RSPR-9U001 Manuel utilisateur

Rosewill

Rosewill RMS-MA2740 Manuel utilisateur

Rosewill

Rosewill RMS-MT6020 Manuel utilisateur

Rosewill

Rosewill RMS-A650 Manuel utilisateur

Rosewill

Rosewill RMS-DDM01 Manuel utilisateur

Rosewill

Rosewill RMS-17004 Manuel utilisateur

Rosewill

Rosewill RMS-FDM01 Manuel utilisateur

Rosewill

Rosewill RMS-FDM02 Manuel utilisateur

Rosewill

Rosewill RMS-DDM02 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur