Rompa 20063 Manuel utilisateur

1. Product Name

ROMPA® Interactive Projection

2. Product Code

20063

3. Colour

Not applicable

4. Brief Description

An incredible multimedia visual display system that projects amazing interactive special effects and

activities directly onto an ‘interactive floor’. Users control dynamic interactive displays with simple

gestures and body movement. Movement is rewarded with engaging experiences and captivating

images.

5. Contents

1 x PC with keyboard

1 x Projector with Remote Control

1 x Camera Tracking System

1 x Vinyl Floor (which can be fitted to the floor or left loose)

1 x VGA cable to connect PC to the projector (usually 5 metres)

6. Snoezelen® Stimulations

Visual

7. Best Use

Use in a darkened environment. Use with props to enhance your favourite themes e.g.

brushes to sweep away leaves and so on.

8. Compatible ROMPA® Products

Not applicable

9. Starting Up

There are no short cuts to setting this system up carefully and thoroughly.

10. Detailed Description

Seeing really is believing … and truly delighting! Taking interactivity to a new level!

A virtual wonderland! Making otherwise impossible experiences a reality …

Brush virtual leaves aside with a sweep of your foot …. step through water to create ripples

and see fish move out of your way … set off fireworks with one step!

An incredible multimedia visual display system that projects amazing interactive special

effects and activities directly onto an ‘interactive floor’. Users control dynamic interactive

displays with simple gestures and body movement on the vinyl floor mat. Movement is

rewarded with engaging experiences and captivating images.

Cutting-edge immersive technology to enable clients, regardless of ability, to control and

interact independently with a moving image and explore their own creativity and

imagination.

With nothing to actually touch, this system is safe, requires no cleaning and is perfect for

places where infection control is an issue. As a non-contact resource, once installed, it is also

perfect for those with challenging behaviours.

Multiple easy-to-customise templates are included, with further effects available to build

your own ‘library’. The ROMPA® Interactive Projection can be permanently installed by

ROMPA® in your Snoezelen® room.

OPERATION

1. Press the power button on the PC.

2. Using the remote control, turn the Projector on.

3. Switch the keyboard on. Remember to switch this off after use to preserve battery

life.

4. When the system starts up, you will see the Magic Carpet control panel:

If your system does not automatically launch the Magic Carpet software and you only

see the Desktop, locate the software icon and double-click it:

Note: depending on how your system is configured, it may launch straight into an App.

If this is the case, press escape once to get back to the control panel. If the shortcut

icon on the Desktop gets deleted / disappears, a new shortcut can be created by

navigating to: C:\Program Files\Magic Carpet\

Right click on Magic Carpet.exe and Send To> Desktop (Create Shortcut).

If you see only a blue screen with “CHECK THE INPUT TERMINAL”, locate the Projector

Remote.

Look for the section that says “Computer”. Press “1” once and wait for a few seconds.

If this doesn’t work, try pressing “2” and wait for a few seconds.

5. Use the keyboard to control the system. The trackpad on the right of the device works

in the same way as a laptop track pad with left and right mouse buttons underneath.

6. To launch an App, navigate to the Menu on the left of the Control Panel:

Select an App by clicking once on it with the Left mouse button. Navigate to the right and

click the Start button ONCE and the chosen App will run. Full lists of apps can be found later

in these instructions.

To exit an App, press the Esc key ONCE to return to the Control Panel:

Note: Pressing the Esc key more than once when exiting an App will close the software. If

this happens, run the software again via the Desktop Shortcut.

To shut the system down

The system requires a standard Windows operating system. Older systems run on Windows

XP. More recent systems run on Windows XP, more recent systems require Windows 7

/ Windows 8. To shut down, click Exit on the Control Panel:

Navigate to the Start button at the bottom left of the display:

Click Shut Down:

Make sure the PC has shut down.

Using the Projector Remote, press OFF - ONCE:

Press once to enter shut down mode and once again to confirm shut down. You could also

press ‘Enter’ as directed – either way is fine.

Make sure the PC has shut down and the Projector has cooled down sufficiently before

turning the mains power off. The power light on the Projector will flash orange during the

shut down sequence and show a continuous orange light when completely shut down.

11. Safety

Always supervise the use of this product.

12. Technical Specification

Projector: 5000 hours lamp life

Mat:

The size of the mat the size is determined by the ceiling height and projector lens

throw ratio.

The standard projector throw is 1.3:1 –that means that you can work out the image

size by dividing the ceiling height by 1.3

For example: if a ceiling height is 2.4M –you would simply punch 2.4/1.3 in your

calculator and get 1.846mm as the answer: this is the width of the image. To get

the height of the image you just multiply the previous answer by 0.75 –which in

this example will provide an image height of 1.384mm

Apps:

Table des matières

Autres manuels Rompa Projecteur

Rompa

Rompa 20777 Manuel utilisateur

Rompa

Rompa Super Solar 100C Manuel utilisateur

Rompa

Rompa 23008 Manuel utilisateur

Rompa

Rompa Aura Projector Manuel utilisateur

Rompa

Rompa 19548 Manuel utilisateur

Rompa

Rompa 100 LED Mini Projector Manuel utilisateur

Rompa

Rompa Rainbow Manuel utilisateur

Rompa

Rompa 20997 Manuel utilisateur

Rompa

Rompa 22126 Manuel utilisateur

Rompa

Rompa LED100 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur