Roland SOLJET PROIII XC-540 Manuel utilisateur

Setup Guide

Read this rst.

This describes the setup tasks and important conditions about the installation location

that must be met in order to enable use of this machine.

Thank you very much for purchasing this product.

○To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through

this manual completely and store it in a safe location.

○Unauthorized copying or transferal of this manual, in whole or in part, is prohibited.

○The contents of this document and the specications of this product are subject to change without notice.

○The documentation and the product have been prepared and tested as much as possible. If you nd any misprint or

error, please inform us.

○Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of

this product, regardless of any failure to perform on the part of this product.

○Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect to

any article made using this product.

Contents

Company names and product names are trademarks or registered trademarks of their respective holders.

http://www.rolanddg.com/

To Ensure Safe Use.......................................................................................2

Pour utiliser en toute sécurité .....................................................................9

Setup Guide........................................................................................................17

1. Installation Environment..........................................................................18

Deciding On an Installation Site ...............................................................................................18

Temperature and Humidity ........................................................................................................19

Installation Space ...........................................................................................................................19

2. Included Items.........................................................................................20

3. Assembling and Installing........................................................................21

Step 1: Assemble the Stand........................................................................................................21

Step 2: Mount the Machine .......................................................................................................26

Step 3: Install the Drain Bottle ..................................................................................................27

Step 4: Attach the Ink-cartridge Tray ......................................................................................29

Step 5: Remove the Packing Materials....................................................................................30

4. Connecting the Cables............................................................................32

Connecting the Cable of the Take-up Unit............................................................................32

Connecting the Power Cable and the Network Cable......................................................33

5. XC-540 : Installing the Ink Cartridges .....................................................34

Filling with Ink for the First Time...............................................................................................34

Installing the Ink Cartridges .......................................................................................................34

6. XC-540MT : Installing the Ink Cartridges ................................................38

Ink Mode............................................................................................................................................38

Filling with Ink for the First Time...............................................................................................38

Applying the Labels (White Mode Only)................................................................................38

Selecting the Ink Mode ................................................................................................................39

Installing the Ink Cartridges .......................................................................................................40

7. Installing the Blade..................................................................................44

8. Network Settings ....................................................................................46

Introduction .....................................................................................................................................46

Step 1: Make the Network Settings for the Computer .....................................................46

Step 2: Make the Network Settings on the Printer.............................................................48

Step 3: Make the Port Settings for the Software RIP .........................................................50

To Ensure Safe Use

Improper handling or operation of this machine may result in injury or damage to property. Points

which must be observed to prevent such injury or damage are described as follows.

About WARNING and CAUTION Notices

WARNING Used for instructions intended to alert the user to the risk of death or severe

injury should the unit be used improperly.

CAUTION

Used for instructions intended to alert the user to the risk of injury or material

damage should the unit be used improperly.

Note: Material damage refers to damage or other adverse eects caused with

respect to the home and all its furnishings, as well to domestic animals or pets.

About the Symbols

The symbol alerts the user to important instructions or warnings. The specic meaning

of the symbol is determined by the design contained within the triangle. The symbol at left

means "danger of electrocution."

The symbol alerts the user to items that must never be carried out (are forbidden). The

specic thing that must not be done is indicated by the design contained within the circle.

The symbol at left means the unit must never be disassembled.

The symbol alerts the user to things that must be carried out. The specic thing that must

be done is indicated by the design contained within the circle. The symbol at left means the

power-cord plug must be unplugged from the outlet.

To Ensure Safe Use

Incorrect operation may cause injury

WARNING

Be sure to follow the operation proce-

dures described in this documentation.

Never allow anyone unfamiliar with the

usage or handling of the machine to

touch it.

Incorrect usage or handling may lead to an

accident.

Keep children away from the machine.

The machine includes areas and compo-

nents that pose a hazard to children and may

result in injury, blindness, choking, or other

serious accident.

Never operate the machine while tired

or after ingesting alcohol or any medica-

tion.

Operation requires unimpaired judgment. Im-

paired judgment may result in an accident.

Never use the machine for any purpose

for which it is not intended, or use the

machine in an undue manner that exceeds

its capacity.

Doing so may result in injury or re.

For accessories (optional and consum-

able items, power cord, and the like), use

only genuine articles compatible with this

machine.

Incompatible items may lead to an acci-

dent.

Before attempting cleaning, maintenance,

or attachment or detachment of optional

items, disconnect the power cord.

Attempting such operations while the ma-

chine is connected to a power source may

result in injury or electrical shock.

CAUTION

Exercise caution to avoid being pinched

or becoming caught.

Inadvertent contact with certain areas may

cause the hand or ngers to be pinched or

become caught. Use care when performing

operations.

Never attempt operation while wearing a

necktie, necklace, or loose clothing. Bind

long hair securely.

Such items may become caught in the ma-

chine, resulting in injury.

Conduct operations in a clean, brightly

lit location.

Working in a location that is dark or cluttered

may lead to an accident, such as becoming

caught in the machine as the result of an

inadvertent stumble.

Never climb or lean on the machine.

The machine is not made to support a per-

son. Climbing or leaning on the machine may

dislodge components and cause a slip or fall,

resulting in injury.

Caution: cutting tool.

This machine has an internal tool. To

avoid injury, handle the tool with care.

WARNING

Never attempt to disassemble, repair, or

modify the machine.

Doing so may result in re, electrical shock,

or injury. Entrust repairs to a trained service

technician.

To Ensure Safe Use

WARNING

Connect to an electrical outlet that com-

plies with this machine's ratings (for volt-

age, frequency, and current).

Incorrect voltage or insufcient current may

cause re or electrical shock.

Never use out of doors or in any location

where exposure to water or high humidity

may occur. Never touch with wet hands.

Doing so may result in fire or electrical

shock.

Never allow any foreign object to get in-

side. Never expose to liquid spills.

Inserting objects such as coins or matches

or allowing beverages to be spilled into the

ventilation ports may result in re or electrical

shock. If anything gets inside, immediately

disconnect the power cord and contact your

authorized Roland DG Corp. dealer.

Never place any ammable object nearby.

Never use a combustible aerosol spray

nearby. Never use in any location where

gases can accumulate.

Combustion or explosion may be a danger.

Danger of electrical short, shock, electrocution, or re

Ratings

WARNING

Handle the power cord, plug, and electri-

cal outlet correctly and with care. Never

use any article that is damaged.

Using a damaged article may result in re or

electrical shock.

When using an extension cord or power

strip, use one that adequately satises the

machine's ratings (for voltage, frequency,

and current).

Use of multiple electrical loads on a single

electrical outlet or of a lengthy extension cord

may cause re.

Connect to ground.

This can prevent re or electrical shock due

to current leakage in the event of malfunc-

tion.

Position so that the power plug is within

immediate reach at all times.

This is to enable quick disconnection of the

power plug in the event of an emergency.

Install the machine next to an electrical outlet.

Also, provide enough empty space to allow

immediate access to the electrical outlet.

If sparking, smoke, burning odor, unusual

sound, or abnormal operation occurs, im-

mediately unplug the power cord. Never

use if any component is damaged.

Continuing to use the machine may result in

re, electrical shock, or injury. Contact your

authorized Roland DG Corp. dealer.

To Ensure Safe Use

Important notes about the power cord, plug, and electrical outlet

Never place any object on top or subject to

damage.

Never bend or twist with undue force.

Never pull with undue force.

Never bundle, bind, or roll up.

Never allow to get wet.

Never make hot.

Dust may cause re.

To Ensure Safe Use

Ink, cleaning uid, and discharged uid are ammable and toxic

In the event of ingestion or physical distress

 In the event of contact with the eyes, immediately ush with water for at least 15 minutes. If eye ir-

ritation continues, seek treatment by a physician.

 In the event of contact with skin, immediately wash with soap. If irritation or inammation occurs, seek

treatment by a physician.

In the event of ingestion, do not induce vomiting, and immediately seek treatment by a physician.

Forcibly inducing vomiting may lead to danger of choking.

If odor leads to physical distress, move to a well-ventilated location and rest quietly. If dizziness or

nausea persists, seek treatment by a physician.

WARNING

Keep open flame away from the work

area.

Ink and discharged uid are ammable.

Never store ink, cleaning uid, or dis-

charged fluid in any of the following

locations.

 Any location exposed to open ame

Any location where high temperature

may occur

Near bleach or any other such oxidizing

agent or explosive material

Any location within the reach of chil-

dren

Fire may be a danger. Accidental ingestion by

children may pose a health hazard.

Never place an ink cartridge in re.

Ink may ow out, catch re, and spread re

to other nearby objects.

Never drink or sniff ink, cleaning uid, or

discharged uid, or allow them to come

in contact with the eyes or skin.

Doing so may be hazardous to the health.

CAUTION

Ensure adequate ventilation for the work

area.

Failing to perform ventilation may result in a

health hazard or danger of combustion due

to ink fumes.

Never allow an ink cartridge to be sub-

jected to impact, and never attempt to

disassemble.

Ink may leak.

To Ensure Safe Use

This machine weighs 260 kg (574 lb.). Media weighs 30 kg (67 lb.).

WARNING

Install the machine in a location that is

level, stable, and able to bear the weight

of the machine.

The total weight of the machine may reach

260 kg (574 lb.) or more. Installation in an un-

suitable location may cause a major accident,

including tip over, fall, or collapse.

Unloading and emplacement are opera-

tions that must be performed by 6 persons

or more.

Tasks that require undue effort when per-

formed by a small number of persons may

result in physical injury. Also, if dropped, such

items may cause injury.

WARNING

Be sure to lock the stand's casters.

If the machine should begin to topple, a major

accident may result, including crushing of the

appendages or the body.

When storing roll media, implement ad-

equate safety measures to ensure that

the stored media will not roll, fall, or

topple over.

Danger exists of becoming pinned under the

media and suffering serious injury.

Handling roll media is an operation that

must be performed by two persons or

more, and care must be taken to prevent

falls.

Attempting to lift heavy media in a manner

that taxes your strength may cause physical

injury.

WARNING

Caution: high temperatures

Areas such as the dryer become hot. Exer-

cise caution to avoid re or burns.

When printing is not being performed,

remove any loaded media or switch off

the power.

The continued application of heat at a single

location may cause the release of toxic gases

from the media or pose a re hazard.

Never use media that cannot withstand

heat.

Doint so may degrade the media, or may

result in re or the release of toxic gases.

Danger of re,burns,or toxic gas emissions

To Ensure Safe Use

Warning labels are afxed to make areas of danger immediately clear. The meanings of these

labels are as follows. Be sure to heed their warnings.

Also, never remove the labels or allow them to become obscured.

Warning Labels

Ink Is Toxic

Ink and discharged uid are toxic.

Avoid contact with the body. Use only

in a well-ventilated area.

Flammable

Ink and discharged uid are ammable.

Keep away from open ame.

Caution: Moving Print Heads

The print heads inside the cover move

at high speed and pose a hazard.

Never insert the hand or ngers into

the gap.

Caution: Pinching Hazard

Be careful not to allow the ngers to

become pinched when loading media

or closing covers.

Ink Is Toxic

Ink and discharged uid are toxic.

Avoid contact with the body. Use

only in a well-ventilated area.

Flammable

Ink and discharged uid are am-

mable. Keep away from open

ame.

Caution: High Temperature

The platen and dryer become hot. Ex-

ercise caution to avoid re or burns.

Caution: High Temperature

The platen and dryer become hot.

Exercise caution to avoid re or burns.

Autres manuels pour SOLJET PROIII XC-540

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Roland Imprimante

Roland

Roland ColorCAMM PRO PC-600 Mode d’emploi

Roland

Roland VersaUV LEF2-200 Manuel d'utilisation

Roland

Roland VersaUv LEF - 12i Manuel d'utilisation et d'entretien

Roland

Roland VersaUV LEF2-300 Manuel utilisateur

Roland

Roland VersaEXPRESS RF-640 Manuel utilisateur

Roland

Roland EU-1000MF Manuel utilisateur

Roland

Roland SP-540i Manuel utilisateur

Roland

Roland XC-540W Manuel utilisateur

Roland

Roland VersaCamm SP-540V Manuel d'utilisation et d'entretien

Roland

Roland Metaza MPX-80 Manuel utilisateur

Roland

Roland TrueVIS VG-640 Manuel utilisateur

Roland

Roland XF-640 Manuel d'utilisation

Roland

Roland VersaStudio BT-12 Manuel utilisateur

Roland

Roland VersaUV LEF-12 Manuel d'utilisation et d'entretien

Roland

Roland VersaCamm SP-540V Manuel utilisateur

Roland

Roland VersaUV LEJ-640 Manuel d'utilisation et d'entretien

Roland

Roland SJ-645EX Manuel utilisateur

Roland

Roland iModela iM-01 Manuel d'utilisation et d'entretien

Roland

Roland CJ-540 Manuel utilisateur

Roland

Roland Advanced Jet AJ-1000 Manuel d'utilisation et d'entretien

Roland

Roland TrueVIS VG2-640 Manuel utilisateur

Roland

Roland SJ-745EX Guide de démarrage rapide

Roland

Roland Metaza MPX-90 Manuel utilisateur

Roland

Roland SJ-1045EX Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur