Rolan TrueVIS MG-640 Manuel utilisateur
Setup Guide
Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to
read through this manual completely.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this operation manual are subject to change without
notice.
• The operation manual and the product have been prepared and tested as much as possible. If you find any
misprints or errors, please inform us.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur
through use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur
with respect to any article made using this product.
Company names and product names are trademarks or registered trademarks of their re-
spective holders.
R1-230126
Copyright © 2023 Roland DG Corporation
http://www.rolanddg.com/
FA02984
Introduction............................................................................................................. 2
1. Checks before Installation.................................................................................................... 3
About the Documentation for This Machine .............................................................................. 3
About Placement and Installation Work................................................................................... 3
Deciding On an Installation Site............................................................................................ 4
Temperature and Humidity ................................................................................................. 5
Installation Space ............................................................................................................ 6
Air Ventilation................................................................................................................. 7
2. Checking the Included Items ................................................................................................. 8
Installation ............................................................................................................. 10
1. Assembly and Ink Filling .....................................................................................................11
Checks before Operations..................................................................................................11
Step 1: Assembling the Stand.............................................................................................12
Step 2: Attaching the Printer Unit and the Stand .....................................................................14
Step 3: Installing the Media Holders .....................................................................................15
Step 4: Installing the Drain Bottle .......................................................................................17
Step 5: Removing the Retainers ..........................................................................................19
Step 6: Affixing the Labels ................................................................................................21
Step 7: Connecting the Power Cord and the Cable....................................................................22
Step 8: Setting the Menu Language and Units of Measurement .....................................................25
Step 9: Fill the Machine with Ink.........................................................................................26
2. Installing the Cutting Tool ...................................................................................................30
Step 1: Assembling the Cutting Tool .....................................................................................30
Step 2: Installing the Cutting Tool .......................................................................................31
3. Network Settings..............................................................................................................34
Step 1: Setting the Computer's Network ................................................................................34
Step 2: Make the Network Settings on the Printer ....................................................................37
4. Downloading and Installing Software ......................................................................................40
Downloading Roland DG Connect Hub ....................................................................................40
Installing the Software .....................................................................................................41
Setting the Software RIP ...................................................................................................43
5. Installation of Ventilating Equipment......................................................................................44
Ventilating Equipment ......................................................................................................44
Installing the Ventilating Equipment .....................................................................................44
Appendix................................................................................................................ 46
Location of the Power Rating and Serial Number Label .....................................................................47
Specifications.......................................................................................................................48
Contents
1
Introduction
1. Checks before Installation......................................................................... 3
About the Documentation for This Machine................................................... 3
About Placement and Installation Work ....................................................... 3
Deciding On an Installation Site................................................................. 4
Temperature and Humidity ...................................................................... 5
Installation Space ................................................................................. 6
Air Ventilation ..................................................................................... 7
2. Checking the Included Items...................................................................... 8
2 Introduction
About the Documentation for This Machine
The following documentation is included with the machine.
Paper Manuals
•Safety Precautions
This manual contains points that must be observed.
•Regular Maintenance Guidelines
This manual provides URLs where procedures can be found for the machine's daily maintenance as well
as for the maintenance that must be performed periodically.
Electronic-format Manuals
•Setup Guide (this document)
This manual contains details on how to install the machine and how to configure its initial settings.
•User's Manual
This manual contains details such as how to use and maintain the machine as well as an FAQ (a set of
frequently asked questions).
You can view and download the electronic-format manuals from the following URL or QR code.
* You can also view and download the paper manuals.
* You can also view this website from a smartphone.
https://downloadcenter.rolanddg.com/MG-640
About Placement and Installation Work
The placement and installation of this machine must be performed by suitably qualified workers.
Entrust operations such as transportation, unloading, and emplacement to trained professionals.
Suitable equipment and technical skills are required in handling the machine. Tasks that require undue effort may re-
sult in a major accident.
WARNING
1. Checks before Installation
Introduction 3
Deciding On an Installation Site
Install the machine in a quiet, stable location offering good operating conditions. An unsuitable location
can cause accidents, fire, faulty operation, or breakdown.
Install the machine in a location that is level, stable, and able to bear the weight of the machine.
The total weight of the machine may reach 207 kg (457 lb.) (30-inch model: 154 kg [340 lb.]) or more. Installation in an
unsuitable location may cause a major accident, including tip over, fall, or collapse.
WARNING
Never install this machine outside or in any location where exposure to water or high humidity
may occur.
Current leakage may cause electrical shock or fire.
WARNING
Never install the machine close to any flammable object or in a gas-filled location.
Combustion or explosion could occur.
WARNING
Position the machine so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emergency. Install the machine next to an
electrical outlet. Also, provide enough empty space to allow immediate access to the electrical outlet.
WARNING
Install the machine in a clean, brightly lit location.
Working in a location that is dark or cluttered may lead to an accident, such as becoming caught in the machine as the
result of an inadvertent stumble.
WARNING
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of combustion due to ink fumes.
CAUTION
Unsuitable installation sites
• Locations subject to large fluctuations in temperature or humidity
• Locations subject to shaking or vibration
• Locations where the floor is tilted, not level, or unstable
• Dusty locations
• Locations exposed to direct sunlight
• Locations near air-conditioning or heating equipment
• Locations exposed to water or moving air
• Locations exposed to considerable electrical or magnetic noise or other forms of electromagnetic en-
ergy
1. Checks before Installation
4 Introduction
Temperature and Humidity
Maintain the specified temperature and humidity even when the machine is not in use. Failure to do so
may result in malfunction.
•During operation: Temperature: 15 to 32°C (59 to 89.6°F), humidity: 20 to 80%RH (no condensa-
tion)
•During non-operation: Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no conden-
sation)
1. Checks before Installation
Introduction 5
Installation Space
The space shown in the figure is required in order to use this machine.
A
B
C
D
E
F
G
MG-640 MG-300
A 4,000 mm (157.5 in.) 3,100 mm (122.05 in.)
B 3,000 mm (118.1 in.) 2,100 mm (82.68 in.)
C 800 mm (31.5 in.)
D 2,000 mm (78.7 in.)
E Unit
F Unit space
G Work space
1. Checks before Installation
6 Introduction
Air Ventilation
This machine emits a small amount of volatile compounds during printing and for some time after printing,
which may cause irritation of your eyes, nose, and throat. When using this machine, make sure to venti-
late the area. Install ventilating equipment as necessary.
1. Checks before Installation
Introduction 7
The following items are included with the machine. Make sure they are all present and accounted for.
Power cord/power plug adapter
(1)*1 Arms (1 each for right and left) Casters (2) Stand legs (1 each for right and
left)
Stand stay (1) Shafts (2)
Shaft clamps (2) Bolts (40) Washers (12) Hexagonal wrench (1)
Pipe (1) Cable clamps (4)*2 Media holders (1 each for right
and left) Media stays (2)
Media clamps (1 each for right
and left)
Middle pinch roller*3
(64-inch model: 6)
(30-inch model: 2)
Blade holder/Blade/Pin (1
each)
Replacement blade for separat-
ing knife (1)
Drain bottle (1) Drain funnel (1) Drain bottle stand (1) Cartridge-slot labels (3)
Replacement wiper (1) Replacement felt wiper (1) Tweezers (1) Connection adapter (1)
Cleaning liquid bottle (1) Cleaning sticks Caster holders (4) Cleaning liquid cartridges (2)
2. Checking the Included Items
8 Introduction
Manuals
*1 Included only with 100 V specifications
*2 Only two cable clamps are used. The remaining two clamps will be used if TUC-4 (optional item) is purchased.
*3 Installed on the machine.
2. Checking the Included Items
Introduction 9
Ce manuel convient aux modèles suivants
1
Table des matières
