Rohr AirForce 10 Manuel utilisateur
Tyre Inators
OPERATION MANUAL
Read this manual carefully before use and keep it for future reference. Failure to do so may result in
injury, property damage and may void the warranty.
Products covered by this manual may vary in appearance, assembly, inclusions, specications,
description or packaging.
V 3.1
English Français Deutsch Italiano Español
© ROHR
2© ROHR
English
2 Contents
3 Quick Start Guide
4 AirForce 10
5 AirForce 10 Max
6 AirForce 15
8 Specications
9 Health and Safety
10 CE Declaration of Conformity
11 - Français
21 - Deutsch
31 - Italiano
41 - Español
Contents
© ROHR 3
© ROHR
English
Tyre ination
01. Connect the screw-on valve connector to the tyre air valve by twisting it clockwise until it
is securely attached.
02. Insert the 12v socket supply into your vehicle’s outlet.
03. Turn on the vehicle’s engine.
04. Switch on the tyre inflator. Monitor the PSI gauge and switch off the unit when the desired
pressure is reached.
05. Remove the valve connector by twisting counter-clockwise.
06. Remove the power socket from the outlet and switch off the vehicle’s engine.
Tyre ination
01. Connect the clamps to vehicle battery.
Red clamp marked with ‘+’ connects to the positive terminal on the battery
Black clamp marked with ‘-’ connects to the negative terminal on the battery
02. Connect the screw-on valve connector to the tyre air valve by twisting it clockwise until it
is securely attached.
03. Switch on the tyre inflator. Monitor the PSI gauge and switch off the unit when the desired
pressure is reached.
Quick Start Guide
The following steps describe the quickest method to operate your tyre inator however, it
is essential you fully read this manual to ensure you are familiar with the general safety
features, precautions and functions necessary to operate the product. Failure to do so may
result in injury, damage to equipment and/or your personal items.
For all models, check the recommended pressures from the manufacturer and be sure
not to over inate. Keep a close eye on the tyre inator at all times to avoid damage to
equipment.
© ROHR
4© ROHR
English
AirForce 10
01. Air line
02. Light On/Off switch
03. LED light
04. Power On/Off switch
05. Pressure gauge
06. Motor
07. Compression tank
08.Sport ball nozzle
For any ‘non-return’ valve. We recommend
wetting the end slightly especially if the valve
is old.
09.Air mattress / dinghy nozzle
The longer nozzle has a narrower tip for greater
compatibility, the shorter has a wider tip for
increase airow.
02
06
04 05
03
08 09 09
01
07
© ROHR 5
© ROHR
English
AirForce 10 Max
01. Power On/Off switch
02. LED light
03. Motor
04. Air line outlet
05. Pressure gauge
06. Compression tank
07. 12V outlet socket
08. 12V socket adapter
09. DC clamps
10.Sport ball nozzle
For any ‘non-return’ valve, we recommend
wetting the end slightly.
11.Air mattress / dinghy nozzle
The longer nozzle has a narrower tip for greater
compatibility, the shorter has a wider tip for
increase airow.
Connect the 12V outlet socket (07) to the 12V
socket adapter (08) to adapter the power supply
for use with the DC clamps (09). 10 11 11
01
02
03
04 05
07
08
0906
© ROHR
6© ROHR
English
AirForce 15
01. Air line outlet
02. Power On/Off switch
03. Motor
04. Compression tank
05. DC clamps
06. Air line
07.Sport ball nozzle
For any ‘non-return’ valve. We recommend
wetting the end slightly especially if the valve
is old.
08.Air mattress / dinghy nozzle
The longer nozzle has a narrower tip for greater
compatibility, the shorter has a wider tip for
increase airow.
02
04
05
06
03
07 08 08
01
© ROHR 7
© ROHR
English
Specications
AirForce 10 AirForce 10 Max AirForce 15
Max PSI 100 PSI 100 PSI 150 PSI
Cylinder size 30mm 2x 30mm 60mm
Power 110 W 200 W 540 W
Working current 15 A 15 A 45 A
Flow rate 30 L/m 40 L/m 160 L/m
Special attribute LED light LED light Coiled air line
Dimensions 22.5 x 8.5 x 25.5cm 26 x 8.5 x 17cm 37 x 15 x 23cm
Weight 2.0Kg 2.6Kg 9.0Kg
© ROHR
8© ROHR
English
Health and Safety
Please read and understand this manual for the device you are intending to use
before operating. Keep this manual for future reference.
• Only use this device in a dry environment and for its intended use.
• No warranty is offered for damages resulting from improper use or incorrect operation of this
device.
• This device is not intended to be used by persons (including children) with limited physical,
sensory or mental aptitude or lack of experience and/or knowledge.
• In the event of a fault or failure, any repairs to this tyre inflator must be done by a qualified
person authorised by the manufacturer.
• Keep the power cable away from sources of heat and check the condition of it regularly. If it’s
damaged, have the cable replaced by a qualified person.
• Do not use the charger if damaged or defective.
• Protect the tyre inflator against the elements, especially rainfall. Use the device in well ventilated
areas only.
• Do not leave the
tyre inflator
connected to a power supply when not in use.
• Make sure the connections are secure before use. Failure to do so may result in injury or
damage to personal possessions.
• Always make sure the vehicle manufacturers permit the use of a tyre inflators prior to using
this function.
• Warning, danger to life - when cleaning, never immerse the device in water or other liquids and
never open the product housing.
© ROHR 9
© ROHR
English
CE Declaration of Conformity
We hereby declare that the machine described below complies with the relevant basic safety and health
requirements of the EU Directives, both in its basic design and construction as well as in the version put
into circulation by us. This declaration shall cease to be valid if the machine is modied without our prior
approval.
The undersigned: Michael S McQuaide
As authorised by: Union Mart Ltd
Declares that
Description: Air Compressor
Identication code: AirForce10 / AirForce10 Max / AirForce15
Conforms to the following directives and standards:
--
EN 50498:2010
2014/30/EU
Notied body: SGS-CSTC
The technical documentation is kept by: Union Mart Ltd
Date: 17/04/2020
Signed:
Michael S McQuaide
Chief Executive Ofcer
Name and address of the manufacturer:
Union Mart Ltd, Company No. 8384155.
Registered address: Unit 4, Nursling Industrial Estate, Mauretania Road, Nursling, Southampton, SO16
0YS, United Kingdom.
© ROHR
Goneurs de Pneus
MANUEL D’UTILISATION
Lisez attentivement ce manuel avant de l’utiliser et conservez-le pour vous y référer ultérieurement. Le
non-respect de cette consigne peut entraîner des blessures, des dommages matériels et peut annuler
la garantie. Les produits couverts par ce manuel peuvent varier en termes d’apparence, d’assemblage,
d’inclusions, de spécications, de description ou d’emballage.
V 3.1
Français
Ce manuel convient aux modèles suivants
2
Table des matières
Langues :
Autres manuels Rohr Outils électriques
