Rockler 89409 Manuel utilisateur
Review full instructions prior to use for important safety
information. Always check Rockler.com to confirm that you are
using the most recent version of instructions for your product.
4-Piece Digital Measuring Kit
Effective April 2021
GENERAL SAFETY WARNINGS
2
This product is designed only for specific applications as
defined in the instructions and should not be modified or
used for any manner not described in these instructions.
Use only recommended accessories. Before using the
Rockler Digital Measuring Kit: READ, UNDERSTAND
and FOLLOW ALL INSTRUCTIONS AND SAFETY
WARNINGS. KEEP THESE INSTRUCTIONS READILY
AVAILABLE FOR FUTURE REFERENCE.
>Always confirm that you are using the most recent version
of the Instructions and safety warnings for your product
(see the Instructions link on the product page at
Rockler.com).
>Before using another tool with this product, always read,
understand and follow the instructions and safety
warnings in the owner’s manual for that tool. If you do
not have the owner’s manual, obtain one from the tool’s
manufacturer before using it with this product.
>Before using any chemical with this product, always read,
understand and follow all safety warnings and guidelines
in the manufacturer’s Safety Data Sheet (SDS; formerly
called “MSDS”), especially regarding:
• How to safely use the chemical, including potential
hazards and recommended first aid measures;
• Personal safety equipment required to safely use
the chemical (e.g. gloves, eye protection,
mask/respirator, etc.);
• Proper and safe handling, storage and disposal of
the chemical.
GENERAL SAFETY WARNINGS
3
BP1219
>Before using this product, review and verify that all tools
to be used with it have safety equipment installed and
are in proper working order as defined by the tool’s
owner’s manual.
>Do not use this product until you have read and are
confident you understand:
• Digital Height Gauge (pp. 8 - 11);
• Digital Angle Rule (pp. 12 - 14);
• Digital Calipers (pp. 15 - 18);
• Magnetic Angle Gauge (pp. 19 - 22);
>The user assumes all risk and responsibility for the proper
and safe use of this product and for ensuring product
suitability for the intended application.
>It is the sole responsibility of the purchaser of this
product to ensure that any anyone you allow to use this
product reads and complies with all instructions and
safety precautions outlined in this manual prior to use.
>Follow all standard shop safety practices, including:
• Keep children and bystanders away from the tool
operating area;
• Do NOT use power tools in explosive environments, or
in the presence of flammable liquids, fumes or dust;
• TURN OFF AND UNPLUG all power tools BEFORE
making any adjustments or changing accessories;
• Remain alert and use good judgment. Do not use this
product if you are in any way impaired by medications,
alcohol, drugs or fatigue;
• Keep your work area well lit and clean;
Continued on page 4...
GENERAL SAFETY WARNINGS
4
Drilling, sawing, sanding or machining
wood products can expose you to wood dust, a
substance known to the State of California to cause
cancer. Avoid inhaling wood dust or use a dust mask
or other safeguards for personal protection. For more
information go to www.P65Warnings.ca.gov/wood.
• Dress appropriately. Secure loose clothing, remove all
jewelry and tie up long hair before using this product;
• ALWAYS wear safety glasses, hearing protection
and respiratory protection that complies with
NIOSH/OSHA/ANSI safety standards;
• Use dust collection tools and dust face masks to
reduce exposure to dust;
• Use safety equipment such as featherboards, push
sticks and push blocks, etc., when appropriate;
• Maintain proper footing at all times and do
not overreach;
• Do NOT force woodworking tools.
>These warnings and instructions do NOT represent the
total of all information available regarding tool safety, use
and technique. Always seek out opportunities to learn
more and improve your skills and knowledge.
GENERAL SAFETY WARNINGS
5
Danger indicates a hazardous
situation that, if not avoided, will result in death or
serious injury.
Warning indicates a hazardous
situation that, if not avoided, could result in death or
serious injury.
Caution indicates a hazardous
situation that, if not avoided, may result in minor or
moderate injury or property damage.
Notice indicates important or helpful
information and/or user tips.
BP1219
PRODUCT SPECIFIC
SAFETY WARNINGS
PRODUCT SPECIFIC
SAFETY WARNINGS
> Keep out of reach of children. The digital measuring
tools are NOT toys.
> This product contains a rare earth (neodymium)
magnet and may affect internal medical devices
such as pacemakers. Keep away from internal
medical devices.
> Batteries can explode or leak if heated, disassembled,
recharged, exposed to fire or high temperature or
inserted incorrectly.
6
GENERAL SAFETY WARNINGSPRODUCT SPECIFIC
SAFETY WARNINGS
> The Rockler Digital Measuring Kit is composed
of sensitive tools. Do NOT drop the tools or try
to disassemble them.
> Some of the digital measuring tools could have
sharp edges. Exercise caution in handling.
> Do NOT immerse the digital measuring tools in water.
Do not use solvents to clean. Clean with a soft,
dry cloth.
> When they’re not in use, the digital measuring tools
should be stored in a dry place. A rust inhibitor may
be applied to metal areas of the tools.
> Never place devices with magnets near any electronic
devices or electronic appliances due to potential
property damage.
7
Digital Height Gauge
> Do not attempt to use the Digital Height Gauge on
high-vibration machines.
Technical Specifications
Accuracy: ±0.1mm/±0.004"
Resolution: 0.05mm/0.002"
Working Range: Scale: 0~80mm/0"~3"; Needle: 0~50mm/0"~2"
Power Supply: One CR2032 3V button cell (included)
Working temperature: 32°F to 122°F/0°C to 50°C
Working humidity: ≤85%
Button Locations and Functions (Fig. 1)
ON/OFF: Short single press turns Gauge on in Absolute
Mode (see below for explanation of modes). A second short
press sets the digital readout to 0.
Mm/Inch/Fraction: Short press switches between the three
units of measure. In Fraction mode, the Gauge displays to
the nearest 1/32"; a flashing “in.” indicates that the gauge is
rounding off the measurement.
INC/ABS: Short press switches between Absolute and
Incremental Modes.
8
Fig. 1
ON/OFF Button
mm/inch/fraction
Button
INC/ABS
Button
Battery
Compartment
The Digital Height Gauge uses one
CR2032 3V battery.
Installing/Changing the Battery
1. Pull up on the tab on the top of the digital readout to
remove the battery holder. Fig. 1.
2. Remove the old battery and install a new one, making
sure that the side marked “+” faces down.
3. Carefully slide the battery holder back into the top of the
digital readout. Do not tilt or twist.
9
Zeroing out the Gauge
1. Loosen the thumbscrew on the right side of the digital
indicator (if necessary).
2. Position the Digital Height Gauge so its feet are flat
on a flat surface. Lower the center rule until it touches
the surface.
3. Press the “ON/OFF” button once to turn on the Gauge.
Press it a second time and hold for a second to set the
Gauge to 0.
4. Press the “mm/inch/fraction” button to select the desired
unit of measure.
5. The Gauge is now calibrated, and the digital readout will
show the distance the rule is moved.
6. To set the Gauge for use, lift the center rule to the desired
height and tighten the thumbscrew to lock in the setting.
Do not overtighten the thumbscrew.
Absolute and Incremental Modes
The Digital Height Gauge has two operational modes:
Absolute (ABS) and Incremental (INC). In Absolute Mode
(the default), once the Gauge is zeroed out, any movement of
the center rule from the zero position is shown on the digital
readout.
In Incremental Mode, the Gauge can be set to display the
distance between the first setting and the next setting – for
example, if you want to rout a 1/4" deep groove in a board at
a router table in two passes. To do this, you would zero out
10
Table des matières
Autres manuels Rockler Instrument de mesure
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur