ROCKETLINX ES9528 | ES9528-XT Industrial Managed Switch QUICK INSTALLATION GUIDE
Page | 4 2000543 Rev C | Release Date - July 2017
6. Optionally, enter a user-friendly Device name, which displays a friendly device name in the Device
List pane on the main page.
7. Optionally, enter the ES9528 serial number.
8. Select DHCP IP or Static IP for the IP Mode.
•If you select DHCP IP, go to Step 9.
•If you select Static IP, enter an IP address, Subnet Mask, and Default Gateway value for your
network.
9. Optionally, select the appropriate Network Topology, which is an informational field.
10. Click the Apply Changes button.
11. Click Close to return to the main screen.
12. You are now ready to configure the ES9528 features.
FEATURE CONFIGURATION
The ES9528 provides both in-band and out-band configuration methods:
•Out-band management means that you configure the ES9528 using the RS-232 console cable and
the Command Line Interface (CLI) to access the ES9528 without attaching an admin PC to the
network. You can also use out-bound management, if you lost the network connection to the
ES9528.
•In-band management means that you connect remotely using the ES9528 IP address through the
network. You can remotely connect with the ES9528 web interface or a Telnet console and the CLI.
The following procedure uses a web browser to configure ES9528 features. Refer to the RocketLinx
ES9528/ES9528-XT User Guide for other configuration methods.
1. Open a web browser and enter the IP address of the ES9528.
2. Enter admin for both the user name and the password when prompted.
3. Use the web interface to configure your device as needed for your network.
You can use the help system or the RocketLinx ES9528/ES9528-XT User Guide for information about
configuring ES9528 features.
COMTROL CUSTOMER SERVICE
You can use one of the following methods to contact Comtrol.
Web Address or Phone Number
http://www.comtrol.com/support
ftp://ftp.comtrol.com/html/ES9528_main.htm
