rock space C1 Manuel utilisateur
Smart Wireless Camera
Model No. C1
User Manual
Contents
1. In the box -----------------------------------------01
2. Product overview -----------------------------02
3. Specifications ----------------------------------03
4. Charge the camera -------------------------------03
5. Indicator light status -------------------------03
6. Set up the camera -------------------------------04
7. Select a good spot-------------------------------07
8. Mount the camera------------------------------08
9. Share the camera------------------------------10
10. Firmware upgrade ------------------------13
11. FAQ --------------------------------------------13
12. FCC warning----------------------------------15
In the box
1. Camera *1
2. Bracket *1
3. Mounting kit *1
4. USB cable *1
5. User manual *1
Thank you for choosing rock space!
Please read over this User Manual before using your camera. If you
have any questions, please visit https://rockspaceworld.com or
information.
01
Product overview
Infrared light
Lens
Indicator light
Infrared human
body sensor
MIC
Wi-Fi antenna
Spotlight
Micro-SD card
Power button
Micro-USB port
Reboot button
DC-5V
02
To chage the camera: Use the Micro USB cable to plug into a 5V/1.5A
charging adapter. During charging, the camera's indicator light is solid
yellow, and when the camera is fully charged, the indicator light will
turn into solid green. It will take about 9 hours to fully charge the
camera.
Before you mount the camera on a wall or ceiling, make sure your
camera is fully charged. When in use, the rockhome app will remind
you when the battery is low.
Charge the camera
Indicator light status
Mode Status
Working mode Blue
Sleep mode
Charging mode Yellow
Fully charged mode Green
Specifications
Off
Item
Field of view Horizontal: 96° Vertical: 56°
Diagonal: 128°
Image resolution Max. 1920×1080
Video bitrate Adaptive
Storage media Micro SD card (Up to 128GB)
Battery capacity 9000mAh
Adapter requirement 5V/1.5A
Size 71.2×93.4×121.2 (mm)
Status
03
Set up the camera
1. Download rockhome
All the functions can be performed using the rockhome app. Get the app
from the App Store or Google Play, or scan the QR code below to download
directly.
Open the app, and log in. If you don't have an account, follow the on-screen
instructions to create one.
2. Log in
Unscrew the cover on the back of the camera. Press the power button for
about 5s to power on your camera. You'll hear a prompt and the indicator
light turns blue.
3. Turn on the camera
Get it on
Google Play
Download on the
App Store
Scan for rockhome
or
04
4. Add the camera
Click Add Camera Now in the rockhome app and follow app instructions
to configure your camera and add it to your network.
Note: To ensure a long distance connection, the camera only supports 2.4 GHz Wi-Fi with
stronger wall penetration capability and does not support enterprise Wi-Fi. Please ensure
that the connected Wi-Fi meets the requirements.
Power button
05
When you hear "Wi-Fi Password Error", please check whether the
Wi-Fi password you entered in the rockhome app is correct;
When you hear "Authentication error", please ensure that your
Wi-Fi network is not an enterprise network, and the camera supports
only the network with a security level below WPA-2;
When you hear "Wi-Fi not found", please check whether you select
or enter the correct Wi-Fi name, and place the camera near the Wi-Fi
router and ensure that the router is powered on. Please note that 5
Ghz Wi-Fi cannot be searched by the camera;
When you hear "Retrieving IP time out", it indicates that there are
too many connected devices to your router. Please remove some of
the connected devices that are not commonly used or restart the
router to clear the unconnected devices. You may need to contact
the router administrator;
When you hear "Cloud service connection fail", please check
whether your router is connected to the Internet. When you hear this
error prompt, it is because your home network fails or the selected
router is a local area network server. Please ensure that the network
connection is normal, and try to temporarily turn off the firewall to
connect again.
Troubleshooting
06
Select a goo
d spot
Select a good spot for your camera, place or install the camera in a
position where its view is not blocked, and ensure that it is within the
coverage of your Wi-Fi network. Check your camera's video stream
with the rockhome app.
About 15° downward
Recommended
height about 6 ft
07
Note: The PIR sensor is more sensitive to movements across the camera's field of view
than movements toward or away from the camera. If you mount your camera on a wall,
we recommend 15° downward and about 6 feet above the ground.
You can simply place the camera on a horizontal surface like a shelf
or you can mount it to the mounting plate.
Mount the camera
1. Install the mounting plate
Hold the plate against where you want to mount your camera and
mark
the holes with a pencil. Drill in the screw holes. Then, insert the plastic
expansion tubes into holes, place the plate on the surface and screw
the
mounting screws into the expansion tubes.
08
Table des matières
