Robertshaw RS9110 Manuel utilisateur

R S 9 110

Operation Manual

Table of Contents 1

Thermostat Operation 2-3

Thermostat Quick Reference 4-7

Programming 8-10

Installer Setup Menu 11-15

Terminal Designations 16

DO NOT SWITCH SYSTEM TO

COOL IF THE TEMPERATURE

IS BELOW 50°F (10°C). THIS

CAN DAMAGE THE AIR

CONDITIONING SYSTEM AND

CAUSE PERSONAL INJURY.

Caution

RS 9110

Table of Contents Page

THERMOSTAT OPERATION

LCD Screen Temperature Set-Point Buttons

User ButtonsFan Switch

System Switch

Mon

Room

Set At

SLEEP

FAN

SYSTEM

ON AUTO COOL OFF HEAT

THERMOSTAT OPERATION

LCD Screen

See page 4 for detailed information.

Fan Switch

Select ON or AUTO. ON will run the

fan continuously. AUTO will cycle the

fan on only when the heating or cooling

system is running.

System Switch

Select HEAT or COOL for your HVAC

system. Selecting HEAT turns on the

heat mode. Selecting COOL turns on

the air conditioning mode.

Selecting OFF turns both heating and

cooling off.

Temperature Set-Point

Buttons

Press the or to select

the desired temperature.

User Buttons

Use these buttons to set up

programming options.

Days of the week and

time.

Button Options

Programmable Time Periods:

This thermostat has 4 programmable time

periods per day.

Indicates the current room

temperature.

Displays the user selected

set-point temperature.

Hold: Is displayed

when thermostat

program is overridden.

Low Battery

Indicator:

Replace batteries

when indicator is

shown.

System Operation

Indicators:

The , or icon

will display when the

COOL, HEAT, or (fan)

is on.

NOTE: If these icons

are ashing, there is

a 5-minute delay for

compressor protection.

Tech Set

Next Step Min Com On

Com Delay He at

Cool Swing

Room

Sun Mon Tue Wed Thu

Hold Filter

Set At

SatFri

Set Time

Run Sched

Set Sched

Hold

Prev Step

Done WAKE LEAVE RETURN SLEEP

+1 +2

THERMOSTAT QUICK REFERENCE

Battery Door Information

Install two AAA

Alkaline batteries

into battery

compartment.

Be sure to match

positive (+) ends

of batteries with positive (+) battery

terminals in the battery compartment.

Press the lower portion of

the thermostat to open the

easy access battery door.

THERMOSTAT QUICK REFERENCE

Caution:

When the battery icon appears, replace the alkaline AAA batteries

immediately to avoid damage to your HVAC system. Freezing or overheating

could occur.

Temperature Adjustment (if Using a Program Schedule)

Temporary Adjustment: You may temporarily change the desired temperature set-point

by pressing either or . The temperature will remain at this set-point until the next

programmed WAKE, LEAVE, RETURN, or SLEEP event. The program schedule will

then resume.

Program Schedule Hold: The thermostat will display HOLD and RUN SCHED on

the left of the screen when you press either or . You may hold the temperature at

a xed temperature set-point and override the program schedule by pressing HOLD. The

thermostat will display HOLD below the temperature set-point to notify you that the program

schedule hold is in effect.

To Return to Programming: Press RUN SCHED to return to the program schedule.

THERMOSTAT QUICK REFERENCE

Filter Change Reminder

The thermostat can be congured to remind you when the air lter needs to be changed. The

lter change reminder can be adjusted to up to 2000 hours in 50 hour increments.

If the installer congured the thermostat to issue this reminder, FILTER will be displayed

when it is time to change the air lter. When FILTER is displayed, you should change the air

lter and reset the Filter Change Reminder by holding down the second button from the top

left side of the thermostat for 3 seconds.

Mon

Room

Set At

SLEEP

FAN

SYSTEM

ON AUTO COOL OFF HEAT

Hold down button for

3 seconds to reset

lter reminder.

THERMOSTAT QUICK REFERENCE

Set Time of Day and Day of Week

1. Press the MENU button.

2. Press SET TIME.

3. Day of the week will be ashing. Use or to select the current

day of the week.

4. Press NEXT STEP.

5. The current hour will be ashing. Use or to select the current hour.

Note the correct a.m. or p.m. indicator is selected.

6. Press NEXT STEP.

7. The minutes will be ashing. Use or to select the current minutes.

8. Press DONE when completed.

PROGRAMMING

Autres manuels pour RS9110

Table des matières

Autres manuels Robertshaw Thermostat

Robertshaw

Robertshaw 9620 Manuel utilisateur

Robertshaw

Robertshaw Smart Sense Series Manuel utilisateur

Robertshaw

Robertshaw 9560 Manuel utilisateur

Robertshaw

Robertshaw 9801i2 Manuel utilisateur

Robertshaw

Robertshaw 900 series Manuel

Robertshaw

Robertshaw 9851i Manuel utilisateur

Robertshaw

Robertshaw SMART 2000 Manuel utilisateur

Robertshaw

Robertshaw RS9110 Manuel utilisateur

Robertshaw

Robertshaw 9801i2 Manuel utilisateur

Robertshaw

Robertshaw RS8110 Manuel utilisateur

Robertshaw

Robertshaw 9420 Manuel utilisateur

Robertshaw

Robertshaw Smart Sense SMART 1000 Manuel utilisateur

Robertshaw

Robertshaw 9615 Manuel utilisateur

Robertshaw

Robertshaw RS9110 Manuel utilisateur

Robertshaw

Robertshaw 9405 Manuel utilisateur

Robertshaw

Robertshaw 8401 Manuel utilisateur

Robertshaw

Robertshaw 9725i2 Manuel utilisateur

Robertshaw

Robertshaw 9851i Manuel utilisateur

Robertshaw

Robertshaw RS10420T Manuel utilisateur

Robertshaw

Robertshaw RS4110 Manuel utilisateur

Robertshaw

Robertshaw 200 Series Guide d'installation et d'utilisation

Robertshaw

Robertshaw RS4110 Manuel utilisateur

Robertshaw

Robertshaw RS8210 Manuel utilisateur

Robertshaw

Robertshaw 9701i Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur