Robert Juliat DALIS 860 CYCLIODE Manuel utilisateur
DALIS - 860
Version V2 –01/04/16
DN41077600
Robert Juliat S.A.S. 32, rue de Beaumont, F60530 Fresnoy-en-Thelle - phone : +33 (0)3 44 26 51 89 - fax : +33 (0)3 44 26 51 89 - inf[email protected]
www.robertjuliat.com
Dalis - 860
Cycliode
Cyclight
Cycliode 300W LED 8 couleurs
8 colours LED 300W Cyclight
Manuel / Manual
Robert Juliat reserve the right to change
or alter any of the items detailed on this page,
to increase or improve manufacturing techniques without prior notice.
Table of contents
1User’s instructions ............................................................................................................................ 1
2Presentation ..................................................................................................................................... 2
2.1 Functions................................................................................................................................. 2
2.2 Identification plate.................................................................................................................... 2
2.3 Accessories included............................................................................................................... 3
2.4 Optional accessories ............................................................................................................... 3
3Set-up............................................................................................................................................... 4
3.1 Mechanics................................................................................................................................ 4
3.2 Electrical.................................................................................................................................. 9
3.3 DATA..................................................................................................................................... 10
4Operation........................................................................................................................................ 12
4.1 Light intensity......................................................................................................................... 12
4.2 Colours .................................................................................................................................. 13
4.3 Colour presets ....................................................................................................................... 15
4.4 CCT ....................................................................................................................................... 17
4.5 Strobe.................................................................................................................................... 17
4.6 Group..................................................................................................................................... 18
4.7 Response time....................................................................................................................... 20
5Control and parameters ................................................................................................................. 21
5.1 Local display and Controls .................................................................................................... 21
5.2 DMX512-A remote control..................................................................................................... 23
5.3 RDM remote control .............................................................................................................. 27
5.4 Art-Net remote control ........................................................................................................... 28
5.5 sACN remote control ............................................................................................................. 29
6Service ........................................................................................................................................... 30
6.1 Preventive maintenance........................................................................................................ 30
6.2 Analysis ................................................................................................................................. 30
6.3 Electronic thermal management system ............................................................................... 30
6.4 Firmware update.................................................................................................................... 30
6.5 Factory defaults..................................................................................................................... 30
EN
EN -1-
1 User’s instructions
GENERAL INSTRUCTIONS
1. Not for residential use.
2. These fixtures must only be serviced by a qualified technician.
3. In addition to the instructions indicated on this page, relevant health and safety requirements of the appropriate EU
Directives must be adhered to at all times.
4. This fixture is in compliance with section 17 - Lighting appliance for theatre stages, television, cinema and photograph
studios. Standards NF EN 60598-1 and NF EN 60598-2-17.
5. This fixture is rated as IP20, and is for indoor use only.
FIXTURE
6. Ensure fixture is correctly mounted on an appropriate support.
7. Protection screens must be replaced in the event of any damage, such as cracks or deep scratches, since these might
reduce performance.
8. When hung or flown the fixture must be secured by an additional hanging accessory (such as a safety cable or bond) of
suitable length –only use Robert Juliat safety cables ref. QR-CS1
9. Safety bonds or cables must be securely attached to the QuickRig system of the fixture and be as short as possible, or
rolled up as necessary, to minimise travel distance should the fixture be dislodged. .
10. WARNING: LED source become hot during use. Allow fixture to cool before servicing.
11. Do not tamper with design of fixture nor any of its safety features.
12. Tighten electrical mains cable connections regularly and replace with one of identical specification if damaged.
13. Use only with correct power supply.
14. Do not orientate the fixture towards a source of light (sun, fixture), in particular for LED versions.
VENTILATION
15. Keep well away from flammable material.
16. Not for outdoor use. Do not cover. Do not permit fixture to get wet.
17. To avoid overheating, do not obstruct air vents –do not cover the unit.
PLEASE NOTE
These products have been built to conform to European standards relating to professional lighting equipment. Any modification
made to our products will void the manufacturers' warranty.
EN
EN -2-
2 Presentation
2.1 Functions
Functions :
1. Feet
2. QuickRig rail
3. ID plate
4. Power IN
5. DMX IN
6. Network
7. NFC sensor
8. Display and keypad
9. DMX OUT
10. Power OUT
2.2 Identification plate
Description :
1. Model :
2. Version :
3. Serial number
4. Serial number in barcode format
EN
EN -3-
2.3 Accessories included
Reference
Description
1
COU0003305
Neutrik PowerCon© True1 connector (ref. NAC3FX-W)
2
DN41086000
Quick Start manual
2.4 Optional accessories
Reference
Description
1
CAL03
3 meter power cable ( 3G1,5 HO7RNF) with Neutrik PowerCon© True1 and
CEE 7/7 (2P+T NF/SCHUKO) connectors
2
CAL04
1,50m power cable UL/CSA with Neutrik PowerCon© connector
3
CAL05
Combined Neutrik PowerCon© True1 / DMX (5 pins) patch cable - length: 1m
4
QR-CS1
QuickRig safety cable Ø3mm L=600mm - SWL: 20 Kg
5
QR-Pin
16mm QuickRig pin
6
885
Doughty "Supaclamp" (black) with 16mm spigot hole for Ø50mm pipes max. -
SWL: 20Kg - Weight: ,45 Kg
7
QR-Pin2
M10 QuickRig socket (without screw)
8
872
Doughty "Twenty clamp" with M10 screw/nut for Ø48 to 51mm pipes - SWL:
20Kg - TÜV approved
EN
EN -4-
3 Set-up
3.1 Mechanics
3.1.1 Operating positions
3.1.2 Minimum distance between a flammable material and the lighting unit
3.1.3 Instructions for use
Minimum :
5°C
41°F
Maximum :
40°C
104°F
IP20 –Indoor use only
Do not cover the front side
Covering cooling zones 1 & 2 with tape or gel filters result in overheating
0,2 m
0.7 ft
EN
EN -5-
3.1.4 Recommended distances
Dalis has been designed to be installed in a complete continuous row.
Example: for a 10m wide cyclorama, 10 pieces of 1m DALIS are required.
However, Dalis can be distanced with a gap of 30/50 cm. This arrangement does not affect the
evenness and output, it will only minimise the colour fading possibilities.
Depending on the height of the cyclorama and the effect required (evenness of the lighting on the
cyclorama), 1 row (bottom or top) or 2 rows (bottom and top) can be installed.
Below are recommended distances for the best evenness of light on cyclorama. Depending on the
lighting designer expectations, the units can be installed closer to the cyclorama.
Influence of the cyclorama:
Transmission (rear projection) or reflection (front projection) can be different depending
on cyclorama material. Contact your cyclorama supplier for more information
EN
EN -6-
3.1.5 Floor installation
1 & 2 = Tilt Up / 3 & 4 = Tilt Down
3.1.6 Top / side installation
Ensure fixture is correctly mounted on an appropriate support.
The fixture must be installed with 2 clamps.
Net weight : 11Kgs
1.
2.
EN
EN -7-
3.
4.
5.
X 2
EN
EN -8-
3.1.7 Safety cable
When hung or flown, the fixture must be secured by an additional hanging accessory (such as
safety bond or cable) of suitable length.
Safety cables or bonds must be securely attached to the back of the fixture and be as short as
possible, or rolled up as necessary, to minimise travel distance should the fixture be dislodged.
1
3.1.8 Angular sensor
selection in STATUS/ANGULAR ADJUSTMENT menu
A
B
C
Horizontal position
Vertical position
A
B
A
C
Autres manuels pour DALIS 860 CYCLIODE
1
Table des matières
Autres manuels Robert Juliat Projecteur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
