Robe ANOLIS Manuel utilisateur

Version 1.

Eminere Wireless DMX

Table of contents

1. Safety instructions ...................................................................................................................................................... 3

2. Fixture exterior view ................................................................................................................................................... 4

3. Installation .................................................................................................................................................................. 5

3.1 Mounting the fixture ............................................................................................................................................ 5

3.2 Connection to mains ............................................................................................................................................. 5

3.3 The Booster box .................................................................................................................................................... 7

3.4 The Booster box installation ................................................................................................................................. 9

3.5 Jumper cable assembling .................................................................................................................................... 11

4. Technical specifications ............................................................................................................................................ 14

5. Cleaning and maintenance ....................................................................................................................................... 17

5.1 Disposing of the product .................................................................................................................................... 17

6. ChangeLog ................................................................................................................................................................ 17

Eminere Wireless DMX

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE POWERING OR INSTALLING YOUR Eminere !

Save it for future reference.

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure

safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this

manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual

or any unauthorized modification to the device.

Unauthorized modification will void warranty.

1. Safety instructions

DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!

This fixture should be operated only from the type of power source indicated on the marking label. If you are not

sure of the type of power supplied, consult your authorized distributor or local power company.

Always disconnect the fixture from AC power before cleaning, servicing or installing.

Make sure the data/power cable is not damaged by sharp edges. Check the fixture and the power cord from time

to time.

Do not install the unit near an open flame.

During operation the housing becomes hot.

Refer servicing to qualified service personnel.

This fixture falls under protection class I. Therefore this fixture has to be connected to a mains socket outlet with

a protective earthing connection.

Do not connect this fixture to a dimmer pack.

LED light emission. Risk of eye injury. Do not look into the beam from a short distance without suitable protective

eyewear. Do not look at LEDs with magnifiers or similar optical instruments that may concentrate the light

output.

The fixture was designed for outdoor use. This fixture must not be used for underwater installation.

When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust.

Avoid using the unit in locations subject to possible impacts.

The fixture body never must be covered with cloth or other materials when the fixture is under operation.

Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.

Eminere Wireless DMX

The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or

maintenance.

Operate the fixture only after having familiarized yourself with its functions. Do not permit operation by persons

not qualified to operate the fixture. Most damages are the result of unprofessional operation!

Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to the standard

EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video, audiovisual and

entertainment lighting control apparatus for professional use. Part 2: Immunity.

The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.

The installation company should check levels of possible interferences above the tested levels E1,E2,E3 given by

this standard (e.g. transmitters in surrounding area) before installing the equipment.

Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia

equipment – Emission Requirements according to class B.

Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!

Please use the original packaging if the fixture is to be transported.

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the warranty becomes void. Furthermore, any other operation may lead to dangers like short-circuit,

burns, electric shock etc.

2. Fixture exterior view

1. Transparent glass cover

2. LED module

3. Output connector

4. Input connector

5. Mounting brackets

6. Aluminium base

Eminere Wireless DMX

3. Installation

3.1 Mounting the fixture

The Eminere can be arranged in any orientation on a flat, non-flammable surface by means of two mounting

brackets (5), the LED module (2) can be tilted (+95°/-95°) to get access to mounting brackets (5).

Ensure that the structure to which you are attaching

the unit is secure.

3.2 Connection to mains

The unit must be installed by a qualified electrician in accordance with all national

and local electrical and construction codes and regulations.

This device falls under class one and must be grounded!

The Eminere is equipped with auto-switching power supply that automatically adjusts to any 50/60Hz AC power

source from 120-277 Volts.

The following wiring of the input/output connectors applies to the fixtures marked X on their labels only. Older

versions of the Emineres have swapped D- and D+ and do not have mark X on their labels.

E.g.

Input - panel connector Output - panel connector

(front view) (front view)

Fixture´s Amphenol connectors are dust and water protected according to IP 67 by mating with related Amphenol

connectors.

They cannot stay disconnected outdoor.

Eminere Wireless DMX

The output panel connector at last fixture in the Emineres chain has to always be covered with the water-tight

cap to keep declared IP rating.

Do not connect (disconnect) Emineres to the Booster box and each other when they are under voltage!

Direct visibility between a transmitter and the Eminere Wireless DMX must be ensured without

no obstacles (bildings, trees,....).

Distance between a DMX transmitter and the Eminere Wireless DMX depends on transmission range of used DMX

transmitter, surrounds etc (we recommend to test behaviour of DMX transmitter with the Eminere Wireless DMX

before installation).

Examples of connection

The Eminere can be only linked to a transmitter by running the link procedure at DMX transmitter .

The Eminere can be unlinked from the transmitter by running the unlink procedure at DMX transmitter or by

switching off/on the Eminere three times while the transmitter is switched off.

During off/on unlink procedure, the Eminere has to be switched on for 5 seconds in steps 1-3:

Step 1: Eminere Off, Eminere On (5seconds)

Step 2: Eminere Off, Eminere On (5seconds)

Step 3: Eminere Off, Eminere On (5seconds)

Step 4: Eminere Off, Eminere On

Successful unlink is signalized by flashing LEDs at fourth switching the Eminere Off and On. If the LEDs flashing will

not appear, probably the 5 seconds period has not been kept and you have to repeat the Off/On procedure to

unlink the fixture from the DMX transmitter .

DMX addressing of connected Emineres has to be done manually by means of the Robe Universal Interface WTX

and the software RDM Manager.

The tables below state max. theoretical number of Emineres connected in series without Booster boxes.

EMINERE 2 wireless DMX Voltage

Cable length *

120V

190V

230V

277V

10 m

20 m

30 m

Eminere Wireless DMX

50 m

70 m

100 m

EMINERE 3 wireless DMX

Voltage

Cable length *

120V

190V

230V

277V

10 m

20 m

30 m

50 m

70 m

100 m

EMINERE 4 wireless DMX

Voltage

Cable length *

120V

190V

230V

277V

10 m

20 m

30 m

50 m

70 m

100 m

* Cable length is a total cable length among connected Emineres Side including power cable of the first Eminere

Side.

Example: Total cable length=L1+L2+L3

3.3 The Booster box

To compensate a voltage drop in a large installation, the Booster boxes have to be connected in the chain of

Emineres.

The following tables give numbers of Emineres after which the Booster box has to be installed in the chain of

Emineres.

EMINERE 2

Wireless DMX

Max. possible number of Emineres 2 Wireless DMX = 32

Voltage

Cable length

120V

190V

230V

277V

10 m

Eminere Wireless DMX

20 m

30 m

50 m

70 m

12,24,

100 m

9,18

EMINERE 3

Wireless DMX

Max. possible number of Emineres 3 Wireless DMX = 32

Voltage

Cable length

120V

190V

230V

277V

10 m

20 m

30 m

50 m

12,24

70 m

8,16,24

31.

100 m

6,12,18,24,30

15,30

EMINERE 4

Wireless DMX

Max. possible number of Emineres 4 Wireless DMX = 32

Voltage

Cable length

120V

190V

230V

277V

10 m

20 m

30 m

15,30

50 m

9,18,27

70 m

6,12,18,24,30

100 m

4,8,12,16,20,24,28

11,22

Example: E-box Daisy, Power supply= 120V, Cable length=70m, fixture=Eminere 2 wireless DMX

The Booster box has to be connected after every 12th Eminere 2 wireless DMX (fixture 12 and fixture 24) from 32

fixtures.

Eminere Wireless DMX

3.4 The Booster box installation

ALWAYS DISCONNECT THE EMINERES FROM MAINS BEFORE

CONNECTING/DISCONNECTING THE BOOSTER BOX.

The Booster box falls under protection class I. Therefore, every Booster box

has to be connected to a mains socket outlet with a protective earthing connection.

1.Unscrew the four screws (1) from the cover (2) on the Booster box to get access to the terminal block (3) and

two mounting holes of diameter of 4.6 mm (4).

2. Screw the Booster box on a non-flammable flat surface and connect cables.

The Cable gland M20x1.5 for Power IN (5) is intended for a cable of a diameter of 7-13mm.

Remove the end cap from the cable gland before passing the cable.

Power connection

(earth)

Core (EU)

Braun

Blue

Green/yellow

Core (US)

Black

White

Green

We recommend to apply an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable gland

before inserting it into the body of the gland and an adequate layer of the paste LOCTITE 577 on the thread of the

gland body in case of unscrewing the cable gland from the housing of the buster box and repeatedly screwing it

back to the housing .

Eminere Wireless DMX

Cable gland M20 MS:

The cable gland M20 MS with a standard seal serves for a cable of diameter of 6-12mm, for smaller diameter of

cable (4-8mm) you have to remove the original seal from the cable gland M20 and use the enclosed reducing seal

instead of it. The reducing seal for diameter of cable 4-8mm (P/N 13051388) is enclosed in the Booster box.

3. Screw the cover (2) back on the Booster box.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Robe Équipement d'éclairage

Robe

Robe Color mix 575 AT Manuel utilisateur

Robe

Robe Color Spot250AT Manuel utilisateur

Robe

Robe Anolis Divine 160 RGBW/RGBA/PW/TW Manuel utilisateur

Robe

Robe Color Wash 575E AT Manuel utilisateur

Robe

Robe Color Mix 250 AT Series Manuel utilisateur

Robe

Robe ANOLiS ArcSource Submersible II Manuel utilisateur

Robe

Robe ROBIN LEDBeam 350 RGBA Manuel utilisateur

Robe

Robe Robin T11 Profile Manuel utilisateur

Robe

Robe Robin DLX SPOT Manuel utilisateur

Robe

Robe Anolis Calumma XS MC Manuel utilisateur

Robe

Robe XT Series Manuel utilisateur

Robe

Robe Robin 300 plasma spot Manuel utilisateur

Robe

Robe ROBIN iPointe65 Manuel utilisateur

Robe

Robe Calumma Classic M MC Manuel utilisateur

Robe

Robe ColorSpot 250 AT Manuel utilisateur

Robe

Robe Wash 575XT Manuel utilisateur

Robe

Robe Anolis Calumma XS MC Manuel utilisateur

Robe

Robe ColorSpot 700E AT Manuel utilisateur

Robe

Robe CLUBSPOT 160 CT Manuel utilisateur

Robe

Robe Anolis Eminere 1 Manuel utilisateur

Robe

Robe LiteWare HO Manuel utilisateur

Robe

Robe DigitalSpot 5000 DT Manuel utilisateur

Robe

Robe CitySource 96 Manuel utilisateur

Robe

Robe DMX Control 512 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur