Robe Painte Manuel utilisateur

Version 1.0

Table of contents

1. Safety instructions ......................................................................................................... 3

2. Fixture exterior view ...................................................................................................... 5

3. Installation....................................................................................................................... 6

3.1 Connection to the mains ............................................................................................ 6

3.2 Rigging the xture ...................................................................................................... 7

3.3 DMX-512 connection.................................................................................................. 9

3.4 Ethernet connection ................................................................................................ 10

3.5. Wireless DMX operation ......................................................................................... 11

3.6. Replacing rotating gobos ........................................................................................ 12

4. Remotely controllable functions................................................................................. 13

5. Control menu map........................................................................................................ 15

6. Control menu ............................................................................................................... 19

6.1 Tab " Address" .......................................................................................................... 20

6.2 Tab "Information" ...................................................................................................... 21

6.3 Tab "Personality" ...................................................................................................... 24

6.4 Tab "Manual Control"................................................................................................ 26

6.5 Tab "Stand-alone" .................................................................................................... 26

6.6 Tab "Service" ............................................................................................................ 27

7. RDM ............................................................................................................................... 30

8. Error and information messages ................................................................................ 31

9. Technical Specications.............................................................................................. 34

10. Maintenance and cleaning......................................................................................... 37

10.1 Replacing the fuse ................................................................................................. 37

10.2 Checking plastic parts of the xture ....................................................................... 38

10.3 Disposing of the product ........................................................................................ 38

11. ChangeLog ................................................................................................................. 39

12. Appendix .................................................................................................................... 40

12.1 Changing the LED light source ............................................................................ 40

12.2 Obtaining information about the LED light source by mobile phone .................... 42

Robin Painte

Robin Painte EPS

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE POWERING OR INSTALLING YOUR ROBIN PAINTE !

Save it for future reference.

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to en-

sure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes

written in this manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modication to the device.

Please consider that damages caused by manual modications to the device are not subject to warranty.

The Robin Painte was designed for indoor use and it is intended for

professional application only. It is not for household use.

1. Safety instructions

DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!

Make sure that the available voltage is not higher than stated on the rear panel of the xture.

This xture should be operated only from the type of power source indicated on the marking label. If you are

not sure of the type of power supplied, consult your authorized distributor or local power company.

WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable

to completely remove power from unit when not in use or before cleaning or servicing the unit.

Make sure that the power cord is never crimped or damaged by sharp edges. Check the xture and the power

cord from time to time.

Refer servicing to qualied service personnel.

This xture falls under protection class I. Therefore this xture has to be connected to

a mains socket outlet with a protective earthing connection.

Do not connect this xture to a dimmer pack.

LED light emission. Risk of eye injury. Do not look into the beam at short distance of

the of the product. Do not view the light output with optical instruments or any device

that may concentrate the beam.

If the xture has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on

immediately. The arising condensation water might damage your device. Leave the device switched o󰀨 until

it has reached room temperature.

Avoid brute force when installing or operating the xture.

This xture was designed for indoor use only, do not expose this unit to rain or use near water.

When choosing the installation spot, please make sure that the xture is not exposed to extreme heat, moisture

or dust.

Air vents and slots in the xture´s head and base are provided for ventilation, to ensure reliable operation of

the device and to protect it from overheating.

Do not block the front lens with any object when the xture is under operation.

CAUTION! Risk group 2, RG-2

The cooling openings should never be covered with cloth or other materials, and never must be blocked.

This xture should not be placed in a built-in installation unless proper ventilation is provided.

Only operate the xture after having checked that the housing is rmly closed and all screws are tightly fastened.

Always use a secondary safety wire when rigging this xture.

Make sure that the area below the installation place is blocked when rigging, de-rigging or servicing the xture.

The xture becomes very hot during operation. Allow the xture to cool approximately 20 minutes prior to ma-

nipulate with it.

Operate the xture only after having familiarized with its functions. Do not permit operation by persons not

qualied for operating the xture. Most damages are the result of unprofessional operation!

Please use the original packaging if the xture is to be transported.

Please consider that unauthorized modications on the xture are forbidden due to safety reasons!

If this device will be operated in any way di󰀨erent to the one described in this manual, the product may su󰀨er

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-cir-

cuit, burns, electric shock, crash etc.

Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to the standard

EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video, audiovisual and

entertainment lighting control apparatus for professional use. Part 2: Immunity.

The product (covers and cables) must not be exposed to a high frequency electromagnetic eld higher than 3V/m.

The installation company should check levels of possible interferences above the tested levels E1,E2,E3 given

by this standard (e.g. transmitters in surrounding area) before installing the equipment.

Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia

equipment – Emission Requirements according to class B.

To avoid damage of the internal optical system of the xture, never let the sunlight or

other xture lights directly to the front lens , even when the xture is not working !

2. Fixture exterior view

1- Moving head

2- Yoke

3 - Base

4 - Handle

5 - Touch screen

6 - Control buttons

7 - Pan lock

Rear panel of the base

8 - Tilt lock

9 - DMX OUT (5-pin XLR)

10 - DMX IN (5-pin XLR)

11 - Fuse holder

12 - Mains IN (Neutrik powerCON TRUE1)

13 - Mains OUT(Neutrik powerCON TRUE1)

14 - Ethernet IN (RJ 45) - EP version only

15 - Ethernet OUT (RJ 45) - EP version only

The head has to be locked for transportation - the pan lock latch (7) and the tilt lock latch (8) have to be in the

locked positions. To unlock the head, move these latches to unlock positions before operating the xture.

Rear panel of the base - EP version

3. Installation

Fixtures must be installed by a qualied electrician in accordance with all

national and local electrical and construction codes and regulations.

3.1 Connection to the mains

For protection from electric shock, the xture must be earthed!

The Robin Painte is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz AC

power source from 100-240 Volts.

If you need to install a power plug on the power cable to allow connection to power outlets, install a ground-

ing-type (earthed) plug following the plug manufacturer’s instructions. If you have any doubts about proper

installation, consult a qualied electrician.

Core (EU) Core (US) Connection Plug Terminal Marking

Brown Black Live L

Light blue White Neutral N

Yellow/Green Green Earth

This device falls under class one and must be earthed (grounded)!

Design of the ROBIN Painte allows you to connect several xtures to AC mains power in one interconnected

chain using power input and throughput connectors. Needed daisy chain cords are stated in the chapter “Tech-

nical specications “

Maximum number of linked xtures depends on input voltage:

CE: US:

7 xtures at power supply= 230V 5 xtures at power supply= 230V

6 xtures at power supply= 208V 5 xtures at power supply= 208V

4 xtures at power supply= 120V 3 xtures at power supply= 120V

Real numbers of xtures may di󰀨er from values stated above as you have to take into account the length of

supply cables, circuit breaker etc. at projecting of the xtures installation Do not overload the supply line and

connecting leads.

3.2 Rigging the xture

A structure intended for installation of the xture (s) must safely hold weight of the xture(s) placed on it. The

structure has to be certicated to the purpose.

The xture (xtures) must be installed in accordance with national and local electrical and construction codes

and regulations.

For overhead installation, the xture must be always secured with a safety wire that

can bear at least 10 times the weight of the xture.

When rigging, de-rigging or servicing the xture staying in the area below the installation place, on bridges,

under high working places and other endangered areas is forbidden.

The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled

person once a year.

The xture should be installed outside areas where persons may walk by or be seated.

IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)

calculating working load limits, installation material being used, and periodic safety inspection of all installation

materials and the xture. If you lack these qualications, do not attempt the installation yourself, but instead use

a professional structural rigger. Improper installation can result in bodily injury or damage to property.

The xture has to be installed out of the reach of people.

The xture must never be xed swinging freely in the room.

Caution: Fixture may cause severe injuries when crashing down! If you have doubts concerning the safety of

a possible installation, do not install the moving head!

Before rigging make sure that the installation area can hold a minimum point load of 10 times the xture’s weight.

When installing the device, make sure there is no highly inammable

material (decoration articles, etc.) in a distance of min. 0.4 m.

CAUTION!

Use an appropriate clamps to rig the xture on the truss.

Make sure that the device is xed properly! Ensure that the

structure (truss) to which you are attaching the xture is secure.

The xture can be placed directly on the stage oor or rigged in any orientation on a truss without altering its

operation characte ristics .

For securing the xture to the truss, install a safety wire which can hold at least 10 times the weight of the xture.

Use only the safety wire with a snap hook with screw lock gate.

Truss installation

1. Bolt each clamp (1) to the omega holder (2) with M12 bolt and lock nut through the hole in the holder.

2. Fasten the omega holders to the bottom of the base by inserting both quick-lock fasteners (1) into

the holes of the base and tighten fully clockwise.

3. Clamp the xture on a truss (3) and tighten the rigging clamps.

4. Pull a safety wire (5) through the carrying handle and the truss (3) as shown on the picture above in a suitable

position so that the maximum fall of the xture will be 20 cm. Fasten a snap hook in the attachment point (6).

Use only the safety wire with snap hooks with screw lock gates.

1-Quick-lock fastener

2-Omega holder

3-Trust

4-Clamp

5-Safety wire with snap hooks

with screw lock gates

6-Attachment point

When installing xtures side-by-side, avoid illuminating one xture with another!

3.3 DMX-512 connection

The xture is equipped with 5-pin XLR sockets for DMX input and output. Only use a shielded twisted-pair

cable designed for RS-485 and 5-pin XLR-plugs and connectors in order to connect the controller with the

xture or one xture with another.

DMX output DMX input

XLR socket: XLR plug:

If you are using the standard DMX controller, you can connect the DMX output of the controller directly with the

DMX input of the rst xture in the DMX chain. If you wish to connect DMX controllers with other XLR output,

you need to use adaptor cables.

Building a serial DMX-chain.

Connect the DMX output of the rst xture in the DMX chain with the DMX input of the next xture. Always

connect one output with the input of the next xture until all xtures are connected. Up to 32 xtures can be

interconnected.

Caution: At the last xture, the DMX cable has to be terminated with a terminator. Solder a 120 Ω resistor

between Signal (–) and Signal (+) into a (5-pin) XLR plug and plug it in the DMX output of the last xture

1 - Shield

2 - Signal (-)

3 - Signal (+)

4 - Not connected

5 - Not connected

1 - Shield

2 - Signal (-)

3 - Signal (+)

4 - Not connected

5 - Not connected

3.4 Ethernet connection

The xtures on a data link are connected to the Ethernet with appropriate communication protocol (e.g. Art-Net).

The control software running on your PC (or light console) has to support this communication protocol.

Art-Net communication protocol is a 10 Base T Ethernet protocol based on the TCP/IP.I ts purpose is to allow

transfer of large amounts of DMX 512 data over a wide area using standard network technology.

The IP address is the Internet protocol address.The IP uniquely identies any node (xture) on a network.

The Universe is a single DMX 512 frame of 512 channels.

The Robin Painte is equipped with 8-pin RJ- 45 sockets for Ethernet connection. Use a network cable category

5 (with four “twisted” wire pairs) and standard RJ-45 plugs in order to connect the xture to the network.

RJ-45 socket (front view): RJ-45 plug (front view):

1- TD+ 5- Not connected

2- TD- 6- RX-

3- RX+ 7- Not connected

4- Not connected 8- Not connected

Patch cables that connect xtures to the hubs or LAN sockets are wired 1:1,that is,pins with the same numbers

are connected together:

1-1 2-2 3-3 4-4 5-5 6-6 7-7 8-8

If only the xture and the computer are to be interconnected,no hubs or other active components are needed.A

cross-cable has to be used:

1-3 2-6 3-1 4-8 5-7 6-2 7-5 8-4

Connect the Ethernet inputs of all xtures to the Ethernet network. Set their IP addresses and Net Masks

Correct communication protocol (e.g. “ArtNet") has to be selected from the menu “Ethernet Mode” in the xtures

(Addressing-->Ethernet -->Ethernet Mode). Set Universe(s) according to communication protocol.

Example of connection:

(DMX address=1)

IP addres=002.168.002.002

Universe=1

(DMX address=45)

IP addres=002.168.002.003

Universe=1

(DMX address=88)

IP addres=002.168.002.004

Universe=1

(DMX address=174)

IP addres=002.168.002.008

Universe=1

An advised PC setting: IP address: 002.xxx.xxx.xxx (Di󰀨erent from xtures IP addresses)

NET mask: 255.0.0.0

The EP version of the xture is equipped with Ethernet Pass Through Switch which sustains Ethernet integrity,

when the xture has no power, it automatically maintains network connectivity.

If you use the Ethernet IN-OUT way for the Ethernet connection, max. 8 xtures can be connected in

the IN-OUT line.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Robe Matériel de DJ

Robe

Robe Spot 575 XT Manuel utilisateur

Robe

Robe REDpower 1-72 Manuel utilisateur

Robe

Robe POINTE 280 Manuel utilisateur

Robe

Robe ROBIN MegaPointe Wireless DMX Manuel utilisateur

Robe

Robe ROBIN iParfect 150 RGBA Manuel utilisateur

Robe

Robe ROBIN UV Strobe Manuel utilisateur

Robe

Robe DigitalSpot 3000 DT Manuel utilisateur

Robe

Robe WeatherShield 575W Series Manuel utilisateur

Robe

Robe CityLine 48 Manuel utilisateur

Robe

Robe Anolis Calumma XL MC Manuel utilisateur

Robe

Robe Robin SuperSpike Manuel utilisateur

Robe

Robe ROBIN SilverScan Wireless DMX Manuel utilisateur

Robe

Robe Anolis Calumma Remote M MC Manuel utilisateur

Robe

Robe Divine 60 UV Manuel utilisateur

Robe

Robe ColorSpot 575 AT Manuel utilisateur

Robe

Robe redwash 3-192 Manuel utilisateur

Robe

Robe Robin MMX Blade Manuel utilisateur

Robe

Robe iSpiider Manuel utilisateur

Robe

Robe ROBIN ParFect 100 SmartWhite Manuel utilisateur

Robe

Robe picklePATT ES Manuel utilisateur

Robe

Robe Anolis Calumma S MC Manuel utilisateur

Robe

Robe Strobe IP Manuel utilisateur

Robe

Robe ROBIN iForte Manuel utilisateur

Robe

Robe ANOLIS Side Eminere 2 Wireles DMX Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur