WARNING – DASH CAM
- Do not disassemble, repair, or attempt to modify the camera.
- It may cause malfunction or injury and any damage will not be covered under warranty.
- Do not drop the product or SD card.
- It may cause damage or malfunction and is not covered by warranty.
- Do NOT disassemble, repair or modify the Micro SD card.
- It may cause serious damage.
- Do NOT use the device.if the power cable is damaged.
- Itmaycausemalfunction,electricshockorre.
- Do NOT pull directly on the power cable, remove by holding the plug and gently pulling.
- Itmaycausemalfunction,electricshockorre.
- Do NOT attempt to operate the product or App whilst driving.
- It may cause an accident. Stop in a safe place to operate or access the App.
- Do NOT install within the effective range of an airbag.
- It may cause malfunction of the air bag or an accident.
- Do NOT place near magnetic devices / magnets.
- It may cause the device to malfunction or operate erratically.
- Do NOT clean exterior with alcohol, volatile or oily solvents.
- It may cause deformation of the surface and malfunction.
- Ensure power is disconnected before installation.
- It may cause electric shock or malfunction.
- Cleanthatthefront/rearwindowpriortoinstallationandensurethedeviceisrmlyattached.
- Device may become detached if the window is not cleaned before installation.
- Device may become detached due to temperature / humidity / dust / shock.
- Keep the unit away from other GPS devices.
- It may cause interference of the GPS signal rate.
- Keep the power socket clean of dust or obstructions.
- A poor connection may result in malfunction.
- Keep the SD card slot clean of dust or obstructions.
- It may cause a malfunction or Micro SD card inserting problem.
- Note that the Camera may get warm during operation, this is normal.
- When not in use, it is advisable to remove the camera from the vehicle or to place the device out of sight to deter thieves.
WARNING - MICRO SD CARD
Note that Micro SD cards are considered to be consumables and we do not take responsibility for data loss or damage caused by
Micro SD cards malfunctioning.
- Please ensure the Micro SD card used in the camera is solely used for that purpose.
- We recommend using Class 10 Micro SD cards only;
- DC-4 Dash Cam supports Micro SD memory cards up to 128GB.
- For optimal performance, we recommend formatting your Micro SD card via the MyRoadHawk app every 6-8 weeks.
- Do NOT format the memory card using a computer.
- DoNOTforcetheMicroSDcardintotheslot;ensurethecardisthecorrectwayupandpushthecardrmlyintotheslot.
- It may cause malfunction due to card damage.
- If the Micro SD card is not fully inserted, then the camera cannot record data.
- Do not put foreign substances into SD card slot.
- It may cause a malfunction or Micro SD card inserting problem.
- Do not touch the Micro SD card with wet or oily hands.
- It may cause a malfunction.
- RoadHawk recommends you do not name your Micro SD Card.
- Non-specicorrenamedlesorfolderscaninterferewiththeoperationofthecamera.
- Use a secure case for storing Micro SD cards.
- The data may be damaged by static while storing or moving.
- In case of important data, please make sure you back up your Micro SD card.
- The data may be lost after long-term usage.
- Before removing the Micro SD card, please check the power off status.
- If you pull the Micro SD card out whilst powered, it may cause malfunction or data loss. The RoadHawk DC-4 will chime after
the power is removed to let you know it is safe to remove the Micro SD card.
NOTE
- Camera lenses must be kept clean as ensure image quality is maintained.
- GPSfunctionrequireslock-ontimewhenrstpoweredon.Itmaytakeseveralminutesforthedevicetolockontoasatellite
signal.
- GPS signals may be disrupted in vehicles with heated windscreens / metallic tinting.
- Sudden changes of brightness (such as entering / exiting a tunnel) may cause a temporary deterioration in video quality.
- Ensure the Camera is level and is installed in a suitable location; if the Camera is not level, the image may be skewed.
