Rinnai ENERGYSAVER EX08C Manuel utilisateur

Rinnai ENERGYSAVER® Direct Vent

Wall Furnace Installation

Fundamentals

Rinnai ENERGYSAVER® Direct Vent Wall Furnace

Installation Fundamentals

The following course is approved for NATE

continuing education hours (CEH’s).

This course will earn the following CEH’s:

Warm Air Heating-Gas-Installer –2 hours

Warm Air Heating-Gas-Service –2 hours

If you require credit for NATE, please notify the

instructor at this time.

Rinnai Service and Support (800-621-9419)

Rinnai America also provides the following web sites for support:

•www.rinnai.us –our main site for all product, sales, and service information. Of Note—a comprehensive documents library is

available at the sales/service link. Website registration is required for access.

Rinnai America’s phone support structure consists of the following departments:

•CRC –Consumer Response Center –Fielding general calls, consumer questions, etc.

•Available in office from 8 a.m. to 8 p.m. EST, Monday - Friday

•Parts and Warranty Department –Fielding parts orders and warranty issues

•Available in office from 8 a.m. to 5 p.m. EST, Monday –Friday

•Technical Support Department–Fielding technical issues related to the function of all

Rinnai Products

•Available in office from 8 a.m. to 8 p.m. EST, Monday –Friday AND 24/7/365 on call support for technicians who are at the

service location.

•Engineering / Applications Department –Fielding issues related to product applications

including sizing

•Available in office from 8 a.m. to 5 p.m. EST (The engineering dept does not size heating appliance applications—an industry

accepted Btu heat loss calculation must be performed by the installer)

EX17C

EX22C

ES38 EX08C

EX11C

Product Model Numbers and Specifications

NEW

MODELS PREVIOUS MODELS CFM* MAX

POWER* DECIBELS* INPUT BTU

RANGE* AFUE

(Efficiency)*

EX08C ES08, RHFE 201 FA 55.5-82.0 41-42 W 27-36dB 3,000-8,000 NG/LP NG-82%

LP 83%

EX11C ES11, RHFE 263 FAII 69.3-102.5 44-47 W 31-38dB 5,500-11,000 NG

5,700-11,000 LP NG-81%

LP-82%

EX17C ES17, RHFE 431 FAIII

EX17, RHFE 431 WTA 111.3-137.8 40-46 W 33-38dB 8,200-16,700 NG/LP NG-81%

LP-82%

EX22C ES22, RHFE 556 FAIII

EX22, RHFE 556 WTA 111.3-162.7 52 W 32-42dB 8,200-21,500NG

8,200-20,700 LP NG-81%

LP-82%

ES38 RHFE 1004 FA 203.4-360.6 121 W 37-47dBA 10,500-38,400 NG

10,500-36,500 LP NG-80.6%

LP-82%

Ensure the correct part number is identified for service / parts support

*Current model specifications-previous models may slightly vary

All models available in beige

EX22(C) and ES38 models are

also available in white.

WhiteBeige

Features and Benefits

•When sized correctly, the ENERGYSAVER® Furnace can

be used as a whole house/primary heat source.

•Easy Control and Operation

•One-touch ignition

•Programmable thermostat with a temperature range between 55°F to

95°F (13°C to 35°C)

•During normal operation, the display will dim to save power

•Display available in Fahrenheit or Celsius

•Setback and Frost Protection allows a minimum temperature to be

maintained even when off or between scheduled heating events

•Adjustable maximum temperature setting

•Energy saving economy setting

Features and Benefits

•The unit’s standby power consumption is less than 1

watt.

•Seven-stage Intelligent Modulating Gas Valve and

blower control.

•Warm air discharge at floor level.

oDirectional louvers to optimize direction of air flow.

•Ultra-quiet operation-Decibel range of 27-47 is

comparable to a normal conversation.

•Gas type is field convertible.

•Restart Functions allow automatic restart after ignition,

combustion, or power failures.

•Small 3” diameter concentric vent.

Safety Features

•Self Diagnostic Circuitry-Should the ENERGYSAVER®detect an

unsafe operating condition, the unit will shut down and a fault

code will display indicating the specific issue.

oIf the code is due to an ignition or combustion failure, the unit

will attempt to relight automatically.

•Function/Child Lock

•Cool to the touch Cabinets.

•Restricted air filter indication lamp and audible reminder-Current

model ENERGYSAVERS will flash a reminder lamp and emit an

audible beep if it detects operational conditions indicative of a

restricted air filter.

•Sealed Heat Exchanger-flame and combustion is sealed

from the heating area.

Safety Features

•Overheat protection- Multiple temperature sensors monitor the

appliance’s temperature. Shut down occurs if an unsafe

operational temperature is detected.

•Combustion and convection fan validation-should either of these

fans fail to maintain the proper speed (likely due to a restriction),

the PCB will not allow the unit to operate.

•Electronic ignition-no standing pilot.

•Power failure protection-Should the ENERGYSAVER lose power,

the gas supply will automatically close. Upon resumption of

power, the unit will automatically attempt to restart.

•ENERGYSAVERS are equipped with an inline glass fuse and surge

protection to protect from over-current or power surge.

To ensure the ENERGYSAVER operates as designed, an industry standard Btu heat loss

calculation must be performed on the area to be heated.

•This calculation considers all factors that contribute to heat loss such as:

•Area and volume of the space to be heated

•Geographical location and climate where the furnace will be located

•Structural characteristics of the building such as number of windows, exterior doors,

construction material, etc

ENERGYSAVER®Sizing

• The Air Conditioning Contractors’ Association (ACCA) has an

industry standard Btu calculation in their “Manual J” publication.

•A qualified and licensed installer should be familiar with this type

of calculation.

•Visit http://www.acca.org/ for more information.

•Rinnai also offers a basic DV sizing calculator at

http://www.rinnai.us/heat_selector_2007.swf

•NOTE: Incorrectly sized applications can lead to the ENERGYSAVER short-

cycling or failing to bring the area to the desired set point temperature.

The ENERGYSAVER has the ability to heat an entire structure from a central room. Here’s how:

•2nd law of thermodynamics –Heat seeks cold

•Once the main room approaches

the set point temperature, the

heat begins to move to other

rooms—seeking cold.

•The variable gas valve and

blower control modulate to

ensure heat reaches the

remainder of the structure

without overheating the main

area.

•Cold air is detected quickly

by the thermistor—mounted

two inches above the floor

and able to detect changes

as small as 6/10th’s of a

degree (Fahrenheit).

•These features aid in

reducing stratification in the

atmosphere (different layers

of room temperature).

2 3

(Click here to watch animation)

ENERGYSAVER®—Whole House Furnaces

Key concepts

Autres manuels pour ENERGYSAVER EX08C

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Rinnai Four

Rinnai

Rinnai RHFE-551FA Manuel utilisateur

Rinnai

Rinnai RHFE-1004FA Guide de démarrage rapide

Rinnai

Rinnai Energysaver EX17C Manuel utilisateur

Rinnai

Rinnai RHFE-1004FA Guide de démarrage rapide

Rinnai

Rinnai ENERGYSAVER EX08C Manuel utilisateur

Rinnai

Rinnai Energysaver EX17C Fiche technique

Rinnai

Rinnai EX38DT Manuel utilisateur

Rinnai

Rinnai Energysaver ES38 Fiche technique

Rinnai

Rinnai ES11 Guide de démarrage rapide

Rinnai

Rinnai EX17CT Guide de dépannage

Rinnai

Rinnai RHFE-263FA 2 Manuel utilisateur

Rinnai

Rinnai ENERGYSAVER EX11C Guide de démarrage rapide

Rinnai

Rinnai RHFE-201FA Guide de démarrage rapide

Rinnai

Rinnai RHFE-434FTA2 Manuel utilisateur

Rinnai

Rinnai Energysaver ES38 Guide de démarrage rapide

Rinnai

Rinnai RHFE-263FAII Guide de démarrage rapide

Rinnai

Rinnai EX08CT Manuel utilisateur

Rinnai

Rinnai RHFE-556FAIII Guide de démarrage rapide

Rinnai

Rinnai RHFE-431FA Manuel utilisateur

Rinnai

Rinnai Energysaver ES38P Guide de démarrage rapide

Rinnai

Rinnai EX38DT Manuel utilisateur

Rinnai

Rinnai EX1 7 DT Manuel utilisateur

Rinnai

Rinnai ENERGYSAVER EX08C Manuel utilisateur

Rinnai

Rinnai EX08C (RHFE-202FTA) Fiche technique

Manuels Four populaires d'autres marques

Armstrong

Armstrong EG7H SERIES Manuel utilisateur

Payne

Payne PG92ESA Mode d’emploi

SUPREME

SUPREME FEM10-M2301CM-A Instructions de montage

Ingersoll-Rand

Ingersoll-Rand S9V2B080D4VSAC/D Instructions de montage

Johnson Controls

Johnson Controls TM9T Mode d’emploi

Fluke

Fluke 9118A Manuel utilisateur

Lennox

Lennox EL195UHE Elite Series Manuel d'installation et d'exploitation

Intertherm

Intertherm M7RL Series Manuel utilisateur

HDG

HDG Pelletmaster 15 Manuel utilisateur

Pinnacle

Pinnacle Aero Bella AB-716C-QH Manuel

Nortek

Nortek MG2S Series Manuel utilisateur

VERDER

VERDER CARBOLITE GERO ABF 8/28 Manuel

Goodman

Goodman GMV9 Manuel

SUPREME

SUPREME SUP10-M2301C Instructions de montage

Dettson

Dettson AMT400B34-SM1PMA Instructions de montage

Evcon

Evcon DGD 60 MBH Manuel utilisateur

Trane

Trane S8B1A026M2PSAB Instructions de montage

Hart Sceintific

Hart Sceintific 9113 Manuel utilisateur