Rimage Everest Manuel utilisateur

Recovery Disc Instructions for the Producer III Embedded

Producer III Embedded Recovery Disc

Instructions (Everest Printer)

This is an emergency system recovery process and should be used to recover the system’s

default configuration.

-Important: Ensure there are no other embedded Rimage AutoLoaders named

RimageProducer3 actively running on the network.

Note: If this unit is not attached to a network, a monitor, mouse and keyboard must be

connected to the back of the embedded unit.

1. With the unit powered on:

a. Insert the Recovery Disc in the recorder tray marked Drive 1 (top drive).

b. Press and hold the PC power button on the front of the unit until the unit powers off.

c. Press the PC power button again to power on the unit.

2. The application starts automatically and recovery begins.

3. When the operator panel displays REMOVE DISC THEN REBOOT SYSTEM (approximately

10 minutes):

a. Remove the recovery disc from the recorder tray.

b. Press and hold the PC power button until the unit powers off.

c. Press the PC power button again to power on the unit. The system initializes.

4. Watch the operator panel for the prompt: REMOTE LOGON TO: RIMAGEPRODUCER3

(approximately 5 minutes).

5. Continue the recovery:

•If the unit is attached to a network, log on to the system using Remote Desktop

Connection on a separate computer.

Note: See the Rimage Advanced Setup Guide for instructions on accessing the

Remote Desktop Connection.

Computer: RimageProducer3

User Name: Administrator

Password: password

Note: The Password is case sensitive.

Domain: leave blank

•If the unit is not attached to a network, continue the recovery process using the attached

monitor, mouse and keyboard.

6. The Found New Hardware Wizard for the Everest III printer drive displays:

a. Select Install the software automatically (Recommended).

b. Select Next.

c. Select Finish when the installation is complete.

7. From the desktop, select Restart found on the computer desktop. A system shutdown

message displays.

8. When the system has fully initialized, log on to the system. Refer to step 5 for log on

information.

Note: You cannot log on until the system initializes. This may take several minutes.

9. Change the computer name (optional). See the Rimage Advanced Setup Guide for

instructions.

2000026_A 1

Autres manuels pour Everest

6

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Rimage duplicateur de disques

Rimage

Rimage DL5200 Manuel utilisateur

Rimage

Rimage Producer IIIN+ 7100N Manuel utilisateur

Rimage

Rimage DLN5200 Manuel utilisateur

Rimage

Rimage Producer III 7100 Manuel utilisateur

Rimage

Rimage Professional Endeavor Manuel utilisateur

Rimage

Rimage DL5200 Manuel utilisateur

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Manuel utilisateur

Rimage

Rimage DL5200 Instructions d'utilisation et de sécurité

Rimage

Rimage Allegro 100 Instructions d'utilisation et de sécurité

Rimage

Rimage Producer 7100 Manuel utilisateur

Rimage

Rimage Producer III 7100 Manuel utilisateur

Rimage

Rimage DL5200 Manuel utilisateur

Rimage

Rimage Professional 2450 Manuel utilisateur

Rimage

Rimage Producer III 7100 Manuel utilisateur

Rimage

Rimage Allegro 20 Manuel utilisateur

Rimage

Rimage Perfect Image Manuel de la liste des pièces

Rimage

Rimage 3410 Manuel utilisateur

Rimage

Rimage Allegro 20 Manuel utilisateur

Rimage

Rimage 2400 Manuel utilisateur

Rimage

Rimage Professional 5100N Manuel utilisateur

Rimage

Rimage Everest Manuel utilisateur

Rimage

Rimage 3410 Manuel utilisateur

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Manuel utilisateur

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Manuel utilisateur

Manuels duplicateur de disques populaires d'autres marques

Riso

Riso CV Series Manuel

MicroBoards Technology

MicroBoards Technology GX-2 Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUS325DX Manuel utilisateur

Carry

Carry Pro118 Manuel utilisateur

CopyPro

CopyPro PowerPro II Manuel utilisateur

Primera

Primera Max Manuel utilisateur

Logicube

Logicube EchoPlus-NG Manuel utilisateur

Silca

Silca Delta 2000 SA Manuel utilisateur

Reflex7

Reflex7 Daisy Chain Series Manuel utilisateur

Vinpower Digital

Vinpower Digital SharkCopier DC Manuel utilisateur

Codonics

Codonics Virtua E Manuel utilisateur

Octave

Octave Copy Master II Manuel utilisateur

Kanguru

Kanguru U2-DVDDUPE-S Manuel utilisateur

StarTech.com

StarTech.com 8STSATDUP11 Manuel utilisateur

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Manuel utilisateur

Addonics Technologies

Addonics Technologies UDFH7 Manuel utilisateur

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Manuel utilisateur

Addonics Technologies

Addonics Technologies CFASTD5 Manuel utilisateur