Rifton E420 Manuel utilisateur

Supine Stander

E420 & E430 Product Manual

E430 Large Supine stander

E420 Small Supine stander

E420 & E430

Contents

Important information 3

Safety messages 4

Recommended use and dimensions 5

Check your order 6

Basic components

Headboard 6

Footboard 7-8

Small Supine Stander mainboard (E420) 9-10

Large Supine Stander mainboard (E430) 11-12

Accessories

Tray 13

Hand Anchors 14

Arm Anchors 15

Abduction wedge and round abductor 16

Operation 17

Maintenance, cleaning and warranty 18

Materials and user modiﬁcations 19

IMPORTANT

Key for users

Use this key to determine which sections of this product manual apply to you.

Technical Users For professionals who order and set up Rifton products.

Home Users For care-givers who use Rifton products on a regular basis.

Maintenance Personnel For anyone who is responsible for service or

re-ordering of Rifton products and parts.

Please save this product manual for future reference. Additional copies are

available

• Thoroughly read and understand the information in this product manual before

attempting to use this product. If the procedures and instructions in this product manual

are not followed, serious injury or death could occur.

• A qualiﬁed professional must assess the appropriateness and safety of all equipment for

each user.

• This product is intended for use by clients of unreliable judgment. Adult supervision is

required at all times.

• To prevent falls and injuries:

○Do not use this product on rough and uneven terrain, around swimming pools, or

near stairways.

○Ensure the appropriate use of straps and supports at all times. Straps and supports

are provided for the safety of the user and must be carefully adjusted for comfort and

security.

○Tighten all adjustment knobs before use and immediately after making any

adjustments.

• Do not use this product for clients outside the height and weight limits speciﬁed in this

manual.

• To prevent structural failure, which may result in serious injury or death:

○Inspect this product and accessories regularly for loose or missing screws, metal

fatigue, cracks, broken welds, missing attachments, general instability or other signs

of excessive wear.

○Immediately remove this product from use when any condition develops that might

make operation unsafe.

○Do not use Rifton components or products for any purpose other than their intended

use.

WARNING

Recommended use

To prevent falls and injury, do not use the Supine Stander as a

transportation device.

The Rifton Supine Stander is a Class 1 medical device. It supports the user in the standing

position. The Supine Stander differs from a tilt table in that it allows much greater control

of the head, trunk, pelvis, knees and feet while allowing variable weight-bearing. It

is especially suitable for users who lack sufﬁcient anti-gravity control of the head and

shoulder girdle.

For users who have sufﬁcient head and upper trunk control, the headboard folds down to

encourage independence.

The E430 large Supine Stander is recommended for children/adults between 46”– 72” (117

cm – 183 cm) tall and up to 250 lbs (114 kg).

The E420 small Supine Stander is recommended for children/adults between 30”– 50” (75

cm – 25 cm) tall and up to 100 lbs (45 kg).

User and item dimensions

WARNING

User dimensions – inches (cm) small large

Height 30–50 (76-127) 46–72 (117-183)

Key user dimension: height

Select the appropriate Stander by the user’s overall height.

Choose the model that allows for growth.

Important: User’s weight must not exceed the maximum working load.

Item dimensions – inches (cm) small large

Board length and width 53 x 16½ (135 x 42) 73 x 19 (185 x 48)

Distance between laterals 7–13 (18–33) 9 –16 (23–41)

Height when horizontal 28½ (72) 21–30 (53–76)

Height when vertical 54½ (138) 74 (188)

Base length and width 37½ x 27 (95 x 69) 46½ x 29½ (118 x 75)

Max. working load in lbs. (kg) 100 (45) 250 (114)

Check your order

This product comes in a single carton, containing:

1. Supine Stander (includes padding, footboard, adjustable armrests, hip strap, chest strap,

leg straps, one pair of laterals, one pair of head blocks and double-locking casters).

2. Accessories for the Supine Stander.

You may not have ordered all of the available accessories, but use the diagrams that follow

to conﬁrm that your order is complete.

Headboard (see Figures 6a and 6b)

To prevent spinal

injury, ensure the

headboard is in place before tilting the

client to a horizontal position.

To prevent pinching or crushing, ensure

that all body parts are clear of the joint

between headboard and mainboard

during adjustment.

Attaching headboard:

Lift the headboard, slide the cleat (A)

into frame slot, and tighten the

cleat knob (B) (see Figure 7a).

Attaching head blocks:

1. Loosen two knobs (C) on the head block

adjusting clamp.

2. Remove the lateral with curved bracket

(D), turn upright, and insert bracket into

clamp.

3. Slide curved bracket into clamp past

the safety dimples to desired spacing.

Brackets must overlap if spacing of less

than 8” is required.

4. Tighten both knobs (C) to secure the

head block.

5. Repeat this procedure on the second

head block.

WARNING

Basic components

Figure 6a

Figure 6b. Headboard with headblocks attached.

Adjusting headboard: (see Figure 6a)

Position headboard by raising it and sliding

cleat (A) into the frame slot. Tighten cleat

knob (B). If headboard is not needed,

slide cleat up, tighten knob, and fold the

headboard down.

Adjusting head blocks:

Loosen the two knobs on the clamp, slide

the block to the desired position, and

tighten knobs securely.

Footboard

To prevent falls,

ensure the footboard

is in place before tilting the client to a

vertical position.

To prevent pinching or crushing, correctly

position the footboard at the appropriate

height before placing the client on the

footboard.

To prevent injury, lock all four casters at

all times, regardless of whether or not

the product is occupied, except when

moving the stander from one location to

another.

Attaching sandals: (see Figure 7a)

Either large or medium sandals can be

attached to the footboard.

1. Insert carriage bolts with bushings

through the bottom of the footboard.

2. Insert sandal base onto bolts and adjust

sandal before tightening knobs (A)

securely.

3. Place sandal onto base and lock into

place with latch (B).

WARNING

Figure 7a

Figure 8b

Figure 8a

Adjusting sandals:

To adjust sandals, loosen knobs (A), move

sandals to the desired position, and tighten

knobs. Sandal height can be built up or a

toe/heel angle achieved by using one or

more wedges (see Figures 8a and 8b).

Attaching sandal wedges:

To add a wedge, unlatch and remove

sandal from the base, place wedge over the

base and latch it into place; any number of

wedges can be added. Place and latch the

sandal on top of the wedges.

Adjusting footboard:

The footboard can be adjusted to

accommodate users of varying heights.

Loosen the clamp knobs (C), move board

to the desired height, and tighten knobs

securely. For the user’s security, footboard

is best left as close as possible to the ﬂoor

(see Figure 8b).

Adjusting the casters:

Swivel casters allow the Supine Stander

to be moved easily. The foot-operated

brake, locks both the wheel and the

swivel simultaneously.

Small Supine Stander mainboard

(E420)

Adjusting the mainboard:

The hand crank (A) controls the transfer

height adjustment and the tilt angle of

the mainboard. By turning the crank, the

board will begin to tilt. Continue to turn

the crank until the desired angle is reached

(see Figure 9a).

Tilt angle is indicated on the board angle

label. This can be used to record the correct

angle setting for each user.

Attaching laterals:

Laterals (B) ship unassembled. Follow

instructions below to attach them.

1. Remove knob and plastic washer,

leaving rubber washer on the lateral.

2. Slide the bolt of the lateral through the

slot in the board.

3. Replace knob (C) and plastic washer on

bolt on back of board, and tighten knob

Adjusting laterals and straps:

Any lateral or strap can be adjusted in and

out or up and down. To adjust in or out,

loosen the appropriate knobs, slide the

lateral or strap to the desired position, and

tighten the knobs securely.

To adjust up and down or to completely

remove a lateral or strap, loosen the

knob(s) completely and remove the lateral

or strap. The lateral or strap can then be

moved to a different set of slots, and the

knobs tightened securely.

Figure 9a

Figure 9b

Board

angle label

Adjusting hip and leg straps:

To prevent falls and

injury, secure the strap

safety closures (A) when in use.

To adjust height of hip and leg straps, pull

back of strap away from hook-and-loop

fabric at back of the mainboard, slide

strap to the desired height, and secure

hook-and-loop fabric (see Figure 10a).

Adjusting armrests:

To prevent pinching or

crushing, ensure body

parts are clear of potential crush points

while adjusting armrest.

To adjust height of armrest, loosen both

knobs (B), slide armrest to desired position,

and tighten knobs securely. To adjust angle

of armrest, loosen the bottom knob only,

lift or lower front of armrest to desired

position, and tighten knob securely

(see Figure 10a).

Figure 10a

WARNING

Autres manuels pour E420

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Rifton Aide à la mobilité

Rifton

Rifton R840 Manuel utilisateur

Rifton

Rifton K503 Manuel utilisateur

Rifton

Rifton HTS Manuel utilisateur

Rifton

Rifton K310 TRAM Manuel utilisateur

Rifton

Rifton E-Pacer K660 Manuel utilisateur

Rifton

Rifton Pacer K640 large Manuel utilisateur

Rifton

Rifton R123 Manuel utilisateur

Rifton

Rifton Stander S410 Manuel utilisateur

Rifton

Rifton Stander Size 2 Manuel utilisateur

Rifton

Rifton Blue Wave E541 Manuel utilisateur

Rifton

Rifton Stander S410 Manuel utilisateur

Rifton

Rifton Blue Wave E806 Manuel utilisateur

Rifton

Rifton R820 Manuel utilisateur

Rifton

Rifton K509 Manuel utilisateur

Rifton

Rifton K589 Manuel utilisateur

Rifton

Rifton K320 TRAM Manuel utilisateur

Manuels Aide à la mobilité populaires d'autres marques

Alber

Alber Scalamobil iQ Manuel utilisateur

Ferno

Ferno CCT-PX Manuel utilisateur

HEPRO

HEPRO Gripo Manuel utilisateur

Otto Bock

Otto Bock Pheon 3R62 Manuel utilisateur

NRS Healthcare

NRS Healthcare M11090 Manuel utilisateur

Medline

Medline MDS86835DSHEC Guide d'installation

Guldmann

Guldmann Twin Turner II Manuel utilisateur

Drive

Drive ROOMBA Manuel utilisateur

Gate

Gate Balder Manuel utilisateur

Decon wheel

Decon wheel TNS Notos Manuel utilisateur

ExoAtlet

ExoAtlet ExoAtlet-II Manuel utilisateur

Invacare

Invacare Storm Series Mode d’emploi

Rhythm Healthcare

Rhythm Healthcare B3800F Manuel utilisateur

AMF-BRUNS

AMF-BRUNS PROTEKTOR Manuel utilisateur

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Manuel utilisateur

Rhythm Healthcare

Rhythm Healthcare C500U Manuel utilisateur

Lumex

Lumex RJ4200A Manuel utilisateur

Rebotec

Rebotec Jumbo Manuel utilisateur