Ricoh RDC-5000 Manuel utilisateur

ëÊÅ@Å@

èÕ

Chapter

ADVANCED SHOOTING

Changing Recording Modes ................................ 52

Text Mode......................................................... 52

Continuous Shooting Mode ........................... 53

Changing Flash Modes ........................................ 55

Flash Off Mode ................................................ 56

Auto Mode ........................................................ 57

Forced Flash Mode ......................................... 58

Slow Synchro Mode ........................................ 59

Setting the Exposure Compensation.................. 60

Setting the Exposure Compensation............ 60

Changing the White Balance Mode..................... 62

Daylight Mode.................................................. 63

Cloudy Mode (Overcast Mode) ...................... 64

Tungsten Light Mode...................................... 65

Fluorescent Light Mode.................................. 66

Special Shooting Functions ................................ 67

Using the Self-Timer ....................................... 67

Focus Lock Shooting...................................... 68

Manual Focus Shooting.................................. 70

Date Imprinting Mode ..................................... 71

Redeye Reduction Mode ................................ 72

Monochrome Mode (Black & White) Sepia... 73

Interval (Time lapse) Shooting Mode ............ 74

Macro Shooting (Close-up Shooting) ........... 76

S Mode (Shutter Speed).................................. 77

Changing Recording Modes

This section explains how to change recording modes.

Note

• For explanations of the recording mode indications appearing on the LCD

monitor, see “Selecting a Recording Mode” (p.44).

Text Mode

Records text in a crisp image by accentuating the black portion of the text, with the

hues of the surrounding areas being suppressed.

qSet the mode dial to [ ] and press the

MENU button.

The record menu is displayed.

Note

• To cancel the operation, press the

MENU button.

wPress the ▼or ▲button to select

[RECORDING MODE].

ePress the ENTER button to select the

[] mark.

Text mode is now set. Press the MENU button

to close the record menu.

The recording mode setting is displayed on the

LCD monitor. Press the shutter release button

to shoot the subject.

Note

• The flash will not fire in text mode.

• Set Keep Setting to save the recording

mode setting. See “Keep Settings”

(p.106).



１２

１８００×１２００Ｎ

Ａ

MENU [RECORD]

RECORDING MODE :

WHITE BALANCE :AUTO

+/– :OFF

FOCUS :AUTO

DATE IMPRINT :OFF

REDEYE REDUCTION:OFF

MONOCHROME :OFF

INTERVAL MODE :OFF

BACK:MENU SEL.:ENTER

MENU [RECORD]

RECORDING MODE :

WHITE BALANCE :AUTO

+/– :OFF

FOCUS :AUTO

DATE IMPRINT :OFF

REDEYE REDUCTION:OFF

MONOCHROME :OFF

INTERVAL MODE :OFF

BACK:MENU SEL.:ENTER

Advanced Shooting

How to Cancel Recording

When you press down the shutter release button fully, the shot image will appear in

the LCD monitor. While the image is on display, you can cancel its recording. do the

following:

•Press the MENU button. And press the ENTER button when a recording canceled

message is displayed.

How To Cancel the Text Mode

Follow the procedures on the previous page and switch to another mode in step e.

Continuous Shooting Mode

Shoots a subject continuously while the shutter release button is held depressed. The

focus is locked in the state in effect when you press the shutter release button and the

subject is shot continuously at a rate of about one image a second. This function lets

you conveniently capture the beset moment of photography.

qSet the mode dial to [ ] and press the

MENU button.

The record menu is displayed.

Note

•To cancel the operation, press the

MENU button.

wPress the ▼or ▲button to select

[RECORDING MODE].

ePress the ENTER button to select the

[] mark.

The continuous shooting mode is now set.

Press the MENU button to cancel the record

menu. (See “Keep Settings”(p.106).)

MENU [RECORD]

RECORDING MODE :

WHITE BALANCE :AUTO

+/– :OFF

FOCUS :AUTO

DATE IMPRINT :OFF

REDEYE REDUCTION:OFF

MONOCHROME :OFF

INTERVAL MODE :OFF

BACK:MENU SEL.:ENTER

MENU [RECORD]

RECORDING MODE :

WHITE BALANCE :AUTO

+/– :OFF

FOCUS :AUTO

DATE IMPRINT :OFF

REDEYE REDUCTION:OFF

MONOCHROME :OFF

INTERVAL MODE :OFF

BACK:MENU SEL.:ENTER

The recording mode setting is displayed on the

LCD monitor.

When you continue pressing the shutter release

button, the camera will take one picture about every

second continuously. Continuous shooting stops

when you release the shutter release button, and

the images that have been shot so far are recorded

automatically. The message “RECORDING”

appears on the LCD.

Important

Note

•In Continuous shooting mode, the focus

and exposure adjustment level are locked

in the status in effect when you press the

shutter release button.

•The flash does not fire in continuous

shooting mode.

Note

•The maximum number of pictures that can be taken continuously depends on

the picture mode.

•The maximum number of pictures that can be taken continuously at once is

indicated above. The available space of the SmartMedia memory card or

internal memory may allow continued shooting.

•Continuous shooting stops when as many as 9,999 files have been recorded.

In this case, format the SmartMedia memory card or internal memory card to

resume continuous shooting.

•In continuous shooting mode, no image appears on the LCD while pictures

are being taken.

•Set Keep Setting to save the recording mode setting. See “KeepSettings”(p.106).

Canceling the Mode Setting

In step eabove, turn the mode dial to choose another mode.



１２

１８００×１２００Ｎ

No. of Pixels F Mode N Mode E Mode

1800 ×1200 2 5 9

900 ×600 7 14 28

RECORDING

Advanced Shooting

Changing Flash Modes

This section explains how to change the flash mode. Switch the flash mode to meet

your photographic needs.

■Flash Modes

The mode screen will change in the following sequence as you switch the flash mode:

* The factory default setting is flash off mode.

Important

Note

•When you shoot a subject located closer than about 0.4 m (15.8 inches)

with the flash activated, the light from the flash may appear red in the

resultant shot. The subject may also appear white due to over-exposure.

To avoid these problems, switch the camera to flash off mode.

Note

•The flash will not fire in text mode or continuous shooting mode.

•The flash will not fire in the following white balance modes: cloudy (overcast),

daylight, fluorescent light, and tungsten light.

•Enable the keep settings mode to save the flash mode setting. See “Keep

settings”(p.106).

•When shooting a subject with the flash activated, if the subject appears

dark on the LCD monitor, zoom to a wider angle. The subject may be difficult

to focus on with the telephoto setting.

•Shooting in red-eye reduction mode will reduce red eyes appearing in the

resultant picture. See “Redeye Reduction Mode”(p.72).

Effective Range of the Flash

When you shoot in daylight with the flash activated (daylight synchro photography),

the flash has an effective range of about 0.4 to 3.0 m (1.3 ft to 9.9 ft) for the

telephoto setting and 0.4 to 3.4 m (1.3 ft to 11.2 ft) for the wide-angle setting.

The subject will appear dark in the picture if the light from the flash fails to reach

it.

Flash Off Mode Auto Mode Forced Flash Mode Slow synchro Mode

1800x1 00 N

Flash Off Mode

In flash off mode, the flash is disabled even in dark conditions. Use this mode for

shooting where use of the flash is prohibited or where adequate room illumination is

available.

qSet the mode dial to [ ].

wPress the flash mode button to select

[].

The flash off mode is now set.

The flash mode setting is displayed on the LCD

monitor or on the LCD panel. Press the shutter

release button to record the image without firing

the flash.

Important

Note

•The shutter speed slows automatically when you shoot in dark places.

For best results, hold the camera steady or mount the camera on a tripod.

Take extra care in holding the camera steady when using the telephoto

setting ( ).

How To Cancel the Flash Off Mode

Press the flash mode button and switch to another flash mode.



１２

１８００×１２００Ｎ

Advanced Shooting

Auto Mode

This mode automatically discharges the flash when it detects low ambient light or

backlighting. This mode allows you to respond appropriately to a wide range of

standard shooting conditions.

qSet the mode dial to [ ].

wPress the flash mode button to select

mark.

This auto mode is now set.

The mark, which signifies auto mode,

appears only on the LCD monitor. If the mark is

not shown in the LCD panel, the camera is in

auto mode.

When you press the shutter release button, this

mode automatically discharges the flash when

the camera detects low ambient light or

backlighting. The flash LED will light (red)

when you press the shutter release button

lightly.

Note

•The flash LED will pulse while the flash is charging and the LCD monitor will

momentarily blacken. You will not be able to shoot during this interval.

Important

Note

•Subjects shot from less than 0.4 m (15.8 inches) away may be over-

exposed and appear bleached out in the picture. To avoid this, switch to

the flash off mode.

How to Cancel the Auto Mode

Press the flash mode button and switch to another mode.

1800x1 00 N

Forced Flash Mode

When you take a picture against the light or under strong light, the subject’s face may

appear in the shade in the resultant shot. Use forced flash mode to reduce this effect.

In this mode, the flash will fire regardless of the ambient light level.

qSet the mode dial to [ ].

wPress the flash mode button to light

mark.

The forced flash mode is now set.

The flash mode setting is displayed on the LCD

monitor or on the LCD panel. Press the shutter

release button to take the picture using the

flash. The flash LED will light (red) when you

press the shutter release button lightly.

Note

•The flash LED blinks and the LCD

monitor is cleared while the flash is

charging. Pictures cannot be taken in

this state.

Important

Note

•When you shoot a subject located closer than about 0.4 m (15.8 inches)

with the flash activated, the subject may appear white in the resultant shot

due to over-exposure. To avoid this problem, switch to flash off mode.



１２

１８００×１２００Ｎ

How To Cancel the Forced Flash Mode

Press the flash mode button and switch to another flash mode.

Advanced Shooting

Slow Synchro Mode

Slows down the shutter release speed when you shoot a subject with the flash

activated, to prevent the background alone from being darkened.

qSet the mode dial to [ ].

wPress the flash mode button to blink the

mark.

The slow synchro mode is now set.

The flash mode setting is displayed on the LCD

monitor or on the LCD panel. When you press

the shutter release button, the subject is shot in

slow synchro mode with the flash activated.

The flash LED lights (red) as you press the

shutter release button lightly.

Note

•The flash LED blinks and the LCD

monitor is cleared while the flash is

charging. Pictures cannot be taken in

this state.

Important

Note

•When you shoot a subject located closer than about 0.4 m (15.8 inches)

with the flash activated, the subject may appear white in the resultant shot

due to over-exposure. To avoid this problem, switch to flash off mode.

•The shutter speed slows automatically when you shoot in dark places. To

prevent camera shake, hold the camera steady or mount it on a tripod.

Take care to avoid camera shake particularly at telephoto settings.



１２

１８００×１２００Ｎ

How To Cancel Slow Synchro Mode

Press the flash mode button and switch to another flash mode.

Setting the Exposure Compensation

As long as the subject is centered in the shooting range, you can take the picture

normally as the camera will automatically adjust the exposure compensation for

backlighting. If there is a significant difference in brightness between the background

and subject, however, the subject tends to be under- or over-exposed. Exposure

compensation is useful in this situation. You can also use exposure compensation to

produce intentionally under- or over-exposed images.

●Exposure Compensation Range

±2.0 EV (in 0.5 EV steps)

●Shooting Against the Light

The bright background will make the subject appear under-exposed. Set the exposure

compensation level to a positive value to adjust the exposure.

Important

Note

•If the subject is not centered in the shooting range when taking a picture

against the light, the camera will not assume that the subject is in a backlit

state. Exposure compensation is required in this situation.

●Shooting a White Image

If you shoot an image that appears generally white, the shot will be under-exposed as

a whole, with people appearing dark and white objects appearing gray. Set the

exposure compensation level to a positive (+) value to adjust the exposure.

●Shooting a Black Image

If you shoot an image that appears generally black, the shot will be over-exposed as a

whole, with people appearing white and black objects appearing gray. Set the

exposure compensation level to a negative (–) value to adjust the exposure. Follow

the same procedure when shooting a person under a spotlight, for example.

Setting the Exposure Compensation

Set the exposure compensation level.

qSet the mode dial to [ ] and press the

MENU button.

The record menu will be displayed.

Note

•To cancel the operation, press the

MENU button.

Autres manuels pour RDC-5000

Table des matières

Autres manuels Ricoh Appareil photo numérique

Ricoh

Ricoh Caplio RR30 Manuel utilisateur

Ricoh

Ricoh RDC-7 Manuel utilisateur

Ricoh

Ricoh RDC-i500 Instructions de montage

Ricoh

Ricoh Caplio R5 Manuel utilisateur

Ricoh

Ricoh CX3 Manuel utilisateur

Ricoh

Ricoh WG-4 GPS Manuel utilisateur

Ricoh

Ricoh WG-5 GPS Mode d’emploi

Ricoh

Ricoh Caplio G4 Manuel utilisateur

Ricoh

Ricoh DIACORD L Manuel utilisateur

Ricoh

Ricoh CX1 Manuel utilisateur

Ricoh

Ricoh CX5 Manuel utilisateur

Ricoh

Ricoh WG-M2 Mode d’emploi

Ricoh

Ricoh THETA S Manuel utilisateur

Ricoh

Ricoh 35 Manuel utilisateur

Ricoh

Ricoh Caplio 400G wide F Guide de démarrage rapide

Ricoh

Ricoh Caplio RR-120 Manuel utilisateur

Ricoh

Ricoh Caplio R1V Manuel utilisateur

Ricoh

Ricoh XR-2s Manuel utilisateur

Ricoh

Ricoh RDC I500 Manuel utilisateur

Ricoh

Ricoh PENTAX K-3 Manuel utilisateur

Ricoh

Ricoh Pentax K-70 Mode d’emploi

Ricoh

Ricoh Caplio R40 Manuel utilisateur

Ricoh

Ricoh AF-100 Manuel utilisateur

Ricoh

Ricoh WG-5 GPS Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur