Rice Lake Load Ranger Manuel utilisateur
Load Ranger Wheel Weigh Pads
Quick Start Guide
This document provides the procedures necessary to quickly setup the Load Ranger Wheel Weigh Pads and pair them with the
Ai-1 Indicator to take weight readings.
Wheel Weigh Pad Configuration
Figure 1. Wheel Weigh Pad Display
1. Press to power on the indicator then press during startup. displays.
2. Press three times. displays.
3. Press to enter the Serial menu. displays.
4. Press to enter the ID settings.
5. Press or to increase or decrease the selected digit and press to move between the digits to enter the
pad ID number.
The first Pad ID number must be 01 and the remaining pad ID numbers must increment in ascending numeric order.
Example: 01, 02, 03, etc.
6. Press to confirm. displays.
7. Press to enter the Bluetooth Initialization menu. displays.
8. Press to confirm. displays followed by . displays.
9. Press twice. displays.
10. Press to confirm. briefly displays and all the changed parameters are saved.
11. Repeat steps for all wheel weigh pads in the system.
MODE
SET
DIAG
NUM
SET
NUM
DATA
Note
PN 189611 Rev B
February 22, 2021
Load Ranger Wheel Weigh Pads
2 Visit our website www.RiceLake.com
Pairing Ai-1 Indicator with Wheel Weigh Pads
1. Press to turn on the Ai-1 indicator.
2. During startup, press the upper right corner of the screen when the logo displays to enter the Technical Setup menu.
Figure 2. Touch Upper Right Corner of the Display
3. Press .
4. Press .
5. Press .
Figure 3. Select Scales
6. Select the number of wheel weigh pads to be used.
7. Press .
8. Press .
9. Press .
Calibration
F1
Scale selection
F1
1 scale/s
Number of scales
F1
1
1
F1
2
F2
3
F3
4
F4
5
F5
6
F6
Number of scales 1/3
Cancel OK
OK
WWS configuration
F1
WWS pairing
F1
Load Ranger Wheel Weigh Pads
© Rice Lake Weighing Systems ● All Rights Reserved 3
10. Press to start pairing process. A prompt displays (Figure 4). Do not press anything at this time.
Figure 4. Start Pairing
11. Turn off all of the wheel weigh pads.
12. Turn on the first weigh pad only (pad assigned ID 01).
13. Press in the prompt window (Figure 4 on page 3) to start the pairing process. Connecting... displays
alongside the ID number.
14. Once the serial number of the first wheel weigh pad displays, turn on the second wheel weigh pad (assigned ID 02).
Figure 5. Pairing
15. Repeat this process until all of the weigh pad pin numbers in the desired system are displayed. Once the last wheel
weigh pad is paired, a prompt displays.
Figure 6. Pairing Successful
16. Press to confirm the completion of pairing. The Gravity Value Setting keyboard displays.
PAIR
Start pairing?
Please turn on WWS one by one.
WWS pairing
No Yes
Yes
1
2
3
4
WWS paring
100625534
Connecting...
Esc
Pairing terminated successfully.
Receive configuration from
paired WWS?
WWS pairing
No Yes
Yes
Load Ranger Wheel Weigh Pads
4 Visit our website www.RiceLake.com
17. This should save loading weights on all eight scales.
Figure 7. Set Gravity Value
18. Enter the gravity value for the area the wheel weigh pads are to be used in.
19. Press .
20. Press three times to get back to the Technical Setup menu.
Figure 8. Technical Setup Menu
21. Press . Setup changed box displays.
Figure 9. Setup Changed
22. Press to save settings and complete setup. Indicator reboots to Weigh mode.
Initial Setup Parameters
The following parameter windows display during initial setup before the indicator reboots to Weigh mode.
• The Backup of the Configuration window — Press to backup all settings
• The Password window displays — Press or , depending if a password is needed
• The Technical Setup window displays — Press to convert the indicator units to match the weigh pad units
Gravity value setting
1Esc2
/
3
4 5
*
6
7BkSp8 -9
COK0
+
9.75001 ~9.84999
9.8O39O
OK
Esc
Calibration
F1
First Programming
F2
AF08 functions
F3
Generic functions
F4
Shortcuts
F5
Databases
F6
Technical setup (INTERNAL USE ONLY)
1/3
Esc
Setup changed.
Save changes before restart the
indicator?
Technical setup
Cancel YesNo
Yes
Yes
Yes
No
Yes
Load Ranger Wheel Weigh Pads
© Rice Lake Weighing Systems ● All Rights Reserved 5
Applications
The Load Ranger weigh pads can be arranged to serve multiple applications. The adjustment from one scenario to another is
made quickly and easily with the wireless and portability features of the Load Ranger system. This section highlights several of
the arrangements available.
For additional Load Ranger Wheel Weigh Pad System information, see the Load Ranger Wheel Weigh Pad System
Technical Manual (PN 189612).
Wireless Setup
A wireless system allows for weighing with up to seven connected wheel weigh pads.
Connection Procedure
1. Assign ID numbers to the weigh pads and initialize Bluetooth.
2. Pair the Ai-1 indicator with the weigh pads.
3. Turn off the weigh pads and the Ai-1 indicator.
4. Connect RS485 cables to the weigh pads data communication ports.
5. Connect the other ends of each RS485 cable to one of the Ai-1 indicator communication ports.
The wheel weigh pads can be connected to any of the RS485 ports on the Ai-1 indicator. The pad ID assigned within
the weigh pad dictates the scale number and it does not need to match the Ai-1 indicator channel number.
6. Turn on all of the weigh pads.
7. Turn on the Ai-1 indicator. briefly displays on weigh pads ( represents the assigned pad ID number).
then displays on the weigh pads and they are ready for use.
Wired Setup
A wired system allows for weighing up to four connected wheel weigh pads.
The data communication port is located on the underside of the wheel weigh pad. For the RF-MD the port is located at the
handle end of the platform and is the port further from the edge. For the RF-WD and RF-XWD the port is located at the end
opposite of the platform handles.
Hybrid Wireless Setup
A hybrid system allows for weighing up to 14 connected wheel weigh pads.
A hybrid wireless system allows for the weighing of vehicles with four to seven axles. These larger applications are possible by
connecting each axle set of weigh pads together with a cable, so that one weigh pad is able to transfer both sets of weigh data
wirelessly to the indicator.
Seven wireless and seven wired wheel weigh pads can be connected together for a total of 14 wheel weigh pads.
Note
Note
Note
230 W. Coleman St. • Rice Lake, WI 54868 • USA
U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319
Rice Lake Weighing Systems is an ISO 9001 registered company.
© Rice Lake Weighing Systems Specifications subject to change without notice.
www.ricelake.com
Load Ranger Wheel Weigh Pads
PN 189611 Rev B
February 22, 2021
Table des matières
Autres manuels Rice Lake Échelle
Rice Lake
Rice Lake RoughDeck CS Manuel utilisateur
Rice Lake
Rice Lake Summit SD-1150-WP Manuel utilisateur
Rice Lake
Rice Lake Ishida 3000 Series Feuille d'instructions
Rice Lake
Rice Lake 160-10-7 Manuel du propriétaire
Rice Lake
Rice Lake RS-130 Manuel utilisateur
Rice Lake
Rice Lake Challenger 3 MSI-3460 Manuel utilisateur
Rice Lake
Rice Lake RoughDeck PW-1 Manuel utilisateur
Rice Lake
Rice Lake SURVIVOR PT Manuel utilisateur
Rice Lake
Rice Lake RoughDeck FXB Manuel utilisateur
Rice Lake
Rice Lake Summit SB-1000 Manuel utilisateur
Rice Lake
Rice Lake 350-10-3M Manuel utilisateur
Rice Lake
Rice Lake CLS Series Manuel utilisateur
Rice Lake
Rice Lake Competitor Series Manuel utilisateur
Rice Lake
Rice Lake 181881 Manuel utilisateur
Rice Lake
Rice Lake RL-MPS-50 Manuel utilisateur
Rice Lake
Rice Lake RoughDeck FXB Manuel utilisateur
Rice Lake
Rice Lake TP Series Manuel utilisateur
Rice Lake
Rice Lake RL-DBS Manuel utilisateur
Rice Lake
Rice Lake BenchPro BP-P Manuel utilisateur
Rice Lake
Rice Lake 340-10 Series Mode d'emploi
