Rice Lake Competitor Series Manuel utilisateur

October 2013 159047

Total Body Composition Analyzer – Competitor Series

Column Installation Instructions

PN 152984

The Competitor Series scale has an optional column that can be purchased. Use the following steps to install the

optional column.

CAUTION

It is recommended using two people to install the optional column

Figure 1. Optional Column Components

Table 1. Optional Column Assembly Parts

Item No. Description Qty

3Mounting bracket 1

4Optional column 1

6M6 Socket head cap screw and washer 4

7Cap screw, heck socket flat w/ countersunk head 4

8Machine screw, pan head 6-32 x 5/8 4

9Column cover assembly 1

10 Allen wrench, 4mm 1

11 Allen wrench, 5mm 1

2Body Composition Column Installation Instructions

1. Connect the DB-9 scale base cable and tighten two bolts as shown in Figure 2

Figure 2. Fasten Weight Scale Cables

2. Remove the two M6 plate bolts to separate the mounting bracket from the column, see Figure 3.

Important

If the plate bolts are not disassembled when the body stands, it may damage the body.

Figure 3. Separate the Mounting Plate and Column

3. Assemble the mounting bracket by aligning the bolt holes located at the bottom of the weight scale and

using a 5 mm Allen wrench (provided).

Figure 4. Attach Mounting Bracket

4. Attach the digital display to the column using a screwdriver to attach the display with four bolts as shown

on the left hand side of Figure 5.

Figure 5. Column Attachment

5. Place the scale base on a flat and level surface.

6. Insert the column into the bracket, making sure that the cable is out of the column as shown in the center

illustration of Figure 5.

7. Insert plate bolts into the holes as shown in the right hand picture of Figure 5. Fasten the bolts using a 4

mm Allen wrench (included).

Column Cover Assembly

1. Insert the column cover as shown in Figure 6.

Figure 6. Column Cover Assembly

230 W. Coleman St. tRice Lake, WI 54868 tUSA

U.S. 800-472-6703 tCanada/Mexico 800-321-6703 tInternational 715-234-9171 tEurope +31 (0)26 472 1319

www.ricelake.com www.ricelake.mx www.ricelake.eu www.ricelake.co.in m.ricelake.com

Connect Power Supply and Scale Cable

1. Connect the scale cable to the scale port located on the back of the digital display by fastening the DB-9

cable bolts.

2. Connect the adaptor cable to the adaptor port and plug the power cord into the power outlet.

Figure 7. Power Supply and Scale Cable Connection Locations

Note

CAUTION

Before connecting a peripheral device to this scale, the power should be turned off, otherwise the scale

could malfunction or be damaged due to electric shock.

Power should be supplied from this device to ensure safe operation and durable performance.

This scale should be powered with only the adaptor and cable that are supplied with this product.

Be careful not to touch the scale base part of the scale when the power switch is turned ON.

The scale zeros on power up. For accurate readings, press the zero reset button on the digital display.

Rice Lake Weighing Systems is an ISO 9001 registered company.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Rice Lake Échelle

Rice Lake

Rice Lake 540-10 Series Manuel utilisateur

Rice Lake

Rice Lake 150-10-7 Manuel utilisateur

Rice Lake

Rice Lake CLS Series Manuel utilisateur

Rice Lake

Rice Lake DHH-10 Manuel utilisateur

Rice Lake

Rice Lake Ishida IPC-WP Series Manuel utilisateur

Rice Lake

Rice Lake RL350 Series Manuel utilisateur

Rice Lake

Rice Lake 140-10-7 Series Mode d'emploi

Rice Lake

Rice Lake RS-130 Manuel utilisateur

Rice Lake

Rice Lake TP Series Manuel utilisateur

Rice Lake

Rice Lake D1100 Series Manuel utilisateur

Rice Lake

Rice Lake DeckHand Manuel

Rice Lake

Rice Lake Digi DS-160 Manuel utilisateur

Rice Lake

Rice Lake TC-220 Manuel utilisateur

Rice Lake

Rice Lake IQ plus 2100 Manuel utilisateur

Rice Lake

Rice Lake IB Series Manuel utilisateur

Rice Lake

Rice Lake BenchMark SL Manuel utilisateur

Rice Lake

Rice Lake DIGI DC-200 Manuel utilisateur

Rice Lake

Rice Lake Survivor SR Manuel utilisateur

Rice Lake

Rice Lake Digi DI-10 Manuel utilisateur

Rice Lake

Rice Lake Master BS211 Manuel utilisateur

Rice Lake

Rice Lake RoughDeck LP Manuel utilisateur

Rice Lake

Rice Lake SURVIVOR CW-80 Manuel utilisateur

Rice Lake

Rice Lake RoughDeck CS Manuel utilisateur

Rice Lake

Rice Lake MB Series Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur

Fidelity Electronics

Fidelity Electronics G2e Manuel utilisateur