RHINO TR208LT Manuel utilisateur
© 2006Alamo Group Inc.
RHINO®
1020 S. SangamonAve.
Gibson City, IL60936
800-446-5158
Email: [email protected]
PART'S MANUAL
An Operator's Manual was shipped with the equipment in the
Manual Canister. This Operator's Manual is an integral part of
the safe operation of this machine and must be maintained
with the unit at all times. READ, UNDERSTAND, and FOLLOW
the Safety and Operation Instructions contained in this manual
before operating the equipment. If the Operator's Manual is
not with the equipment, contact your dealer or Servis-Rhino
(800-446-5158) to obtain a Free copy before operating the
equipment.
ROTARY CUTTER
TR208LT/PT
Rev 10-2020 Part No. 00793559P
TO THE OWNER/OPERATOR/DEALER
Allimplementswithmovingpartsare potentiallyhazardous. Thereisno substituteforacautious, safe-mindedoperatorwho
recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to
be used with all its safety equipment properly attached to minimize the chance of accidents.
BEFOREYOUSTART!! Read the safety messages on the implement and shown in your manual.
Observe the rules of safety and common sense!
WARRANTY INFORMATION:
Readand understand the complete Warranty Statementfound inthis Manual. Fill outthe WarrantyRegistration Form
in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card
andontheWarrantyFormthatyouretain.Theuseof"will-fit"partswillvoidyourwarrantyandcancausecatastrophic
failure with possible injury or death.
PARTS
SECTION
Parts Section – 1
Parts Section – 2
©2006 Alamo Group Inc.
For maximum safety and to guarantee optimum product reliability, always use
genuine Servis-Rhino Parts. The use of inferior replacement parts may cause
premature or catastrophic failure which could result in serious injury or death.
Direct any questions regarding parts to:
The following instructions are offered to help eliminate needless delay and error in processing
purchase orders for the equipment in this section.
1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the
basic machine featured in this manual. Part Numbers and Descriptions are given to help
locate the parts and quantities required.
2. The Purchase Order must include the name and address of the person or organization
ordering the parts, who should be charged, and if possible, the serial number of the machine
for which the parts are ordered.
3. The Purchase Order must clearly list the quantity of each part, the complete and correct part
number (be sure to include all periods), and the basic name of the part.
4. The Manufacturer reserves the right to substitute parts where applicable.
5. Some parts are unlisted items which are special production items not normally stocked and
are subject to special handling. Request a quotation for such parts before sending a
Purchase Order.
6. The Manufacturer reserves the right to change prices without prior notice.
NOTE: Please refer to The Safety Section in the front of this Manual for the proper
Part Number when ordering Replacement Safety Decals.
PARTS ORDERING GUIDE
RHINO®
1020 S. Sangamon Ave.
Gibson City, IL 60936
800-446-5158
Email: [email protected]
PART NAME INDEX
AXLE ASSEMBLY - LIFT TYPE................................................................................................................................................................ 4
AXLE ASSEMBLY - LIFT TYPE TAILWHEEL 00776220....................................................................................................................... 5
AXLE ASSEMBLY - PULL TYPE............................................................................................................................................................... 7
AXLE ASSEMBLY - PULL TYPE HUB & SPINDLE ASSEMBLY 00790220....................................................................................... 9
BLADE CARRIER...................................................................................................................................................................................... 10
CANISTER ASSEMBLY............................................................................................................................................................................ 11
CYLINDER ASSEMBLY - PULL TYPE................................................................................................................................................... 12
DECALS - LIFT TYPE................................................................................................................................................................................ 13
DECALS - PULL TYPE.............................................................................................................................................................................. 15
DRIVELINE - 00793194 DOUBLE SHAFT FLEX COUPLER................................................................................................................ 17
DRIVELINE - JACKSHAFT 00793191...................................................................................................................................................... 18
DRIVELINE - MAIN CV 540RPM 00787965SP PULL TYPE................................................................................................................. 19
DRIVELINE -540RPM 00793370 LIFT TYPE.......................................................................................................................................... 20
GEARBOX ASSEMBLY - 00777389P 1:1.21 SU 540 (DIVIDER).......................................................................................................... 21
GEARBOX ASSEMBLY - 00791028 1:1.69 NO-LUBE (OUTBOARD).................................................................................................. 23
GUARDING ASSEMBLIES....................................................................................................................................................................... 25
LEVEL ROD ASSEMBLY - PULL TYPE 00793257................................................................................................................................ 26
QUICK HITCH COMPONENTS................................................................................................................................................................ 27
SHIELD ASSEMBLY - CENTER LIFT TYPE.......................................................................................................................................... 29
SHIELD ASSEMBLY - CENTER PULL TYPE......................................................................................................................................... 30
SHIELD ASSEMBLY - OUTBOARD........................................................................................................................................................ 32
SKID SHOES............................................................................................................................................................................................... 34
SLIPCLUTCH - 00793535........................................................................................................................................................................... 35
TONGUE ASSEMBLY - PULL TYPE....................................................................................................................................................... 36
©2019 Alamo Group Inc. Parts Section -3
TR208
TIRE OPTIONS......................................................................................................................................................................................... 37
AXLE ASSEMBLY - LIFT TYPE
ITEM PART NO. QTY. DESCRIPTION
1 00793358 2 WDMT, TR 8` CASTOR ARM
2 00776220 2 ASY, CASTER FORK & WHEEL
3 00793361 2 PLATE, TR 8` CASTOR LOCK
4 00793360 2 PLATE, TR 8` CASTOR HEIGHT
5 00748823 4 HHCS 1/2-13 UNC X 1-1/2 GR.5 PL
6 00001800 4 LOCKNUT TLM 1/2 NC PLC
7 4526 4 NUT LOCK FLG WHIZ 1/2-13 NC PL
8 000514 4 CARB, 1/2 NC 1-1/4 PL5
9 5JRC1680 2 NUT TOPLOCK 1 NC PL
10 03200782 2 HEXB 1 NC 5 PL5
©2019 Alamo Group Inc. Parts Section -4
TR208
BLANK INTENTIONALLY
©2019 Alamo Group Inc.
TR208
AXLE ASSEMBLY - LIFT TYPE TAILWHEEL 00776220
©2019 Alamo Group Inc. Parts Section -5
TR208
AXLE ASSEMBLY - LIFT TYPE TAILWHEEL 00776220
Continued...
ITEM PART NO. QTY.
17 00776212 1
18 00771620 1
19 00780238 1
20 00785915 1
NUT SPINDLE M24 X 2
PIN,COTTER 5/32X2-1/2 PL
ASY,TAILWHEEL HUB (INCLUDES ITEMS 7 & 20)
KIT,BEARING & SEAL (INCLUDES ITEMS 3, 7-10, 13-15)
©2019 Alamo Group Inc. Parts Section -6
TR208
0 00776220 1
1 373024H 1
2 00758899 1
3 02822500 1
4 ---------- 1
5 00776213 2
6 00776219 2
7 00772082 1
8 00776216 4
9 00002000 4
10 00759635 4
11 00013901 4
12 0585020210A 1
13 00772017 2
14 00772018 2
15 00776211 1
16 15B2400 2
DESCRIPTION
ASSY CASTER FORK & WHEEL - COMPLETE
WHEEL & TIRE ASSY
PIN COTTER 3/8X2-1/2 PL EXTEND
FLATWASHER 1 PL STD
HUB 4 BOLT - ORDER 00780238 (ITEM# 19)
BEARING
SEAL OIL 40 X 62 X 8
NIPPLE, GREASE M8X1
BOLT M12 X 1.5 X 25
HHCS 3/8 NC 3/4
LUG BOLT FLAT WASHER
NUT HEX 3/8 NC PL
WDMT,CASTER FORK
BUSHING SPINDLE STEP
DUST CAP
BOLT
FLATWASHER NAR 1-1/2 PL
AXLE ASSEMBLY - PULL TYPE
ITEM PART NO. QTY. DESCRIPTION
1 00793240 2 WDMT, STIFF AXLE ARM
2 00793220 1 WDMT, MAIN AXLE 8` DECK
3 00793242 2 PLATE, AXLE CLAMP
4 00790220 2 ASY,HUB & SPINDLE
5 8727A 1 CYLINDER, HYD 2-1/2 X 8
6 00755234 1 KIT, CONTROL SPACER
7 00791366 1 CASTING, 8IN CYLINDER LOCK
8 420011 1 PIN, CLEVIS 1 X 5 PL
9 02822500 2 FLATWASHER 1 PL STD
10 00606000 2 PIN, COTTER 3/16 X 2"
11 8354 1 PIN, CLEVIS, 1.00 X 3.25
12 00764375 2 HHCS 1/2NC X 3-1/4 PL5
13 00001800 2 LOCKNUT TLM 1/2 NC PLC
14 02959391 8 HHCS 3/4 NC 2-1/4 PL5
©2019 Alamo Group Inc. Parts Section -7
TR208
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels RHINO Coupeur
