RGBlink IC2+ Manuel utilisateur

AV over IP Encoder & KVW/Scaling Decoder

IC2+

User Manual

Article NO: RGB-RD-UM-IC2+ E000

Version NO: V1.0

Before using this product, please read this manual carefully and keep it for

reference. Read the safety operation guide carefully.Pay attention to reminder symbol：

dangerous and Attention.

This manual is only for user operation instructions, not for maintenance services. The

expiration date of the function is March 20, 2020. If the function or related parameters

after this date are changed, supplementary explanations will be provided without prior

notice. For details, please contact each distributor.

individual is not allowed to extract or reproduce the contents of this document in part or

in whole, and shall not be transmitted in any formr.

All other trademarks or registered trademarks mentioned in this document are the

property of their respective owners.

The product picture in this manual is for reference only, please refer to the actual

product.

Safety Operation Guide

To ensure reliable use of the equipment and personnel safety, observe the

following precautions when installing, using, and maintaining the equipment:

Danger

There are live parts in the equipment, non-professionals without permission,

please do not disassemble the equipment, so as to avoid the risk of electric

shock.

Please do not disassemble the equipment when the power is on or running to

avoid the risk of electric shock.

Do not operate with wet hands in case of electric shock.

It is strictly forbidden to place the product in the environment of inflammable

substance, containing explosive gas or heat source.

Attention

Do Not sprinkle any corrosive chemicals or liquids on or near the equipment.

Do Not Plug the hole, and keep the working environment of good ventilation,

facilitate the equipment in the work of the heat released in a timely manner, so as

not to damage the equipment temperature is too high

In order to avoid the damage caused by strong vibration during transportation, it

is recommended to use proper packing or original packing during transportation.

Do not use heavy objects to squeeze power cord and equipment

The equipment must be supplied with a grounded power supply.

Please do not repair the equipment without permission, so as not to aggravate

the damage.

When handling equipment, guard against equipment drop, avoid causing injuries

or equipment damage.

The wet environment or long time do not use, should turn off the general power

supply equipment.

The equipment should be stored for a long time before use. It must be checked

and tested before use.

Before cleaning the equipment, the equipment must be power cut, and please

use a dry cloth to clean the equipment.

Please dispose of the equipment as industrial waste and do not burn it.

Contents

Chapter 1 The Introduction .................................................................................1

1.1 Introduction ...................................................................................................1

1.2 Functional Features .......................................................................................1

1.3 Components of Packaging .............................................................................2

Chapter 2 Product Appearance ...........................................................................3

2.1 Front Panel .................................................................................................... 3

2.2 Rear Panel ......................................................................................................3

Chapter 3 System Connection ............................................................................. 6

3.1 Matters Needing Attention ........................................................................... 6

3.2 Connection Configuration Diagram ...............................................................7

Chapter 4 System Settings .................................................................................. 8

4.1 Parameter Settings ........................................................................................9

4.1.1 UMPlatform Interface is Introduced ...................................................... 9

4.1.2 Set the Node Name and IP Address ......................................................10

4.1.3 Set General Node Parameters .............................................................. 12

4.1.4 Input Node 4K Input Parameter Settings ............................................. 15

4.1.5 KVM Input Node Settings ..................................................................... 15

4.1.6 General Parameter Settings for the Output Node ............................... 16

4.1.7 Set Parameters of the Output Node of the Splice Wall ....................... 18

4.1.8 Configure the KVM Output Node ......................................................... 20

4.1.9 RS232 Configure Transparent Serial port Transmission .......................21

4.1.10 RS485 Configure Transparent Serial Port Transmission .....................22

4.1.11 Relay Configuration ............................................................................ 23

Chapter 5 System Design and Configuration .................................................... 24

5.1 Overview ..................................................................................................... 24

5.2 Log in to Software ....................................................................................... 24

5.3 Signal Source Configuration ........................................................................ 25

5.4 Video Wall Configuration ............................................................................ 27

5.5 KVM Seting .................................................................................................. 32

5.6 Authorization ...............................................................................................33

5.7 UI design - Button Configuration ................................................................ 34

5.8 Practice Test ................................................................................................ 37

5.9 Configure Upload and Download ................................................................37

5.10 Configuration Saving, Backing up and Importing .....................................38

Chapter 6 Perform Operations on the Client .....................................................40

Chapter 7 KVM operation ................................................................................. 43

Chapter 8 Upgrade the Firmware ..................................................................... 44

8.1 Matters Needing Attention ........................................................................ 44

8.2 Check and Upgrade the Mainboard ........................................................... 44

Chapter 9 Size ................................................................................................... 45

Chapter 10 Installation ..................................................................................... 46

Chapter 11 After Sales Service .......................................................................... 47

Chapter 12 Appendix ........................................................................................ 48

12.1 Terms & Definitions ...................................................................................48

12.2 Revision History .........................................................................................56

12.3 Support ......................................................................................................57

Chapter 1 The Introduction

1.1 Introduction

This is a device that makes full use of advanced technologies such as video

compression processing, network technology, visualization technology, and centralized

control. It integrates multiple functions, including video stitching and processing, KVM

cooperative management, audio processing, centralized control, and photoelectric

mutual backup, and integrates codec with IP network. It has the characteristics of

distributed, network, visualization and decentralized server. The product fully takes into

account the key performance of video processing, such as synchronization, real-time,

compatibility, respiration effect and color restoration. It can reach 4K@30Hz input and

4K@30Hz output, support LCD, LED and DLP split-screen, support I/O, IR, RS232,

relay and RS485 external control, and provide cost reduction, easy wiring, visual

control, decentralized operation and central control integrated solutions for various HD

or 4K video application scenarios.

It can be widely used in conference center, exhibition center, command center,

traffic center and so on.

1.2 Functional Features

Integrated encoder and decoder, dip switch mode;

Supports H.264 and H.265 codec protocols.

True distributed, no server, no need for other auxiliary equipment, completely

decentralized;

Good real-time performance and good experience. The average time between

KVM video output and host local is 60ms.

Operation visualization, KVM and client visualization;

Input and output up to 4K@30Hz;

Better synchronization performance, supporting LCD, LED, DLP splicing screen;

Support multi-channel decoding, single screen 16 screen, roaming, overlay;

Support common custom window layout presets; Support pre-layout and release;

Support subtitle, scene, scene polling;

Supports user interface customization.

Support instant pre-layout release;

The front panel supports IP display.

Optional OPto-electronic mutual backup is supported.

1.3 Components of Packaging

The host x1

Hanging ear x2

Screw (securing mounting ears) X4

Machine foot x4

The instructions X1

Certificate of Quality & Warranty cardX1

Phoenix seat X4

Note: The machine is strictly packed before leaving the factory. Please confirm

whether the ordered products and accessories are damaged, deformed or missing

before using the product. If there is any damage, discrepancy or missing, please

contact the product supplier.

Chapter 2 Product Appearance

2.1 Front Panel

Figure 2-1 Front panel of the switch

No.

Name

Description

OLED screen

0.91 inch OLED screen, supporting IP address, CPU

usage, temperature, startup time, network display, etc.

2.2 Rear Panel

Figure 2-2 Rear panel of the switch

No.

Name

Description

Grounding

screw

For ground wire

DC 12V power

port

12V2A female connector of the DC power supply

connects to the male connector of the 5.5 x 2.1 DC

power supply and interconnects with the network

POE power supply。

ETH 1000 POE

Gigabit network ports that support POE power

supply, connect to gigabit switches, and interwork

with network POE power supply. The default IP

address is 192.168.*.*

FIBER 1G SFP

LC interface, Wavelength: 1310nm, 1550nm,

single mode and two fiber, Package format:SFP、

SFP+（1310nm,10km,LC)（1310nm,40km,LC)

（1550nm,80km,LC)

HDMI IN

Video input

interface

When used as an input node, it is used for HDMI

video input.

RST

eserved reset button

HDMI OUT

As an input node, it is used for input signal loop

out

As an output node, it is used to connect the HDMI

output terminal

Dial the code

switch

Used for encoding input and decoding output

mode switching

Dial ENC code, as the input node, connect to the

signal source

The upper dial is decoded by DEC as the output

node, KVM host node and IPC forwarding node

Audio Out

3.5mm 3 Pin interface, used for analog audio

output interface. L is the left channel,R is the right

channel, and GND is the ground

Audio In

3.5mm 3 Pin analog audio input port. L is the left

channel,R is the right channel, and GND is ground

No.

Name

Description

IR/IO

IR/IO multiplexing 3pin interface, IR and IO

function of two options. The IR can only receive or

send. IO Supports receiving or sending. There are

two ways of IO.

Relay

Relay interface, 12V Max. IN indicates a 12V input

port, and OUT indicates a 12V output port. IN and

OUT Default ports.

RS232

RS232 serial port 3 Pin port, two-way function and

network side direct transparent transmission, TX

for sending, RX for receiving, GND for ground.

RS485

RS485 serial port 3 Pin port for bidirectional and

transparent transmission on the network side. The

3 Pin port A is for sending, B is for receiving, and

GND is for ground.

KM1 /NC

This interface is invalid NC when entering the

(ENC) mode.

When output (DEC) KVM mode, this interface can

be connected to the mouse or keyboard, normal

output node, the interface does not work.

KM2 /PC

When entering (ENC) mode, this interface PC

accepts the USB interface of the host that controls

the signal source. Used to transfer mouse and

keyboard signals.

When output (DEC) KVM mode, this interface can

be connected to the mouse or keyboard, ordinary

output node, the interface does not work.

instructions：

The IR operation consumes a lot of resources during the reception, which is only

used for learning infrared. The IR reception is not performed in the daily operation of

nodes.

The product picture is for reference only.

Table des matières

Autres manuels RGBlink Convertisseur de média

RGBlink

RGBlink Q Series Manuel utilisateur

RGBlink

RGBlink MSP326 Manuel utilisateur

RGBlink

RGBlink VENUS X3 Manuel utilisateur

RGBlink

RGBlink MSP 232 Manuel utilisateur

RGBlink

RGBlink MSP 316H Manuel utilisateur

RGBlink

RGBlink VENUS X1 Manuel utilisateur

RGBlink

RGBlink UMS4 plus Manuel utilisateur

RGBlink

RGBlink D4 Manuel utilisateur

RGBlink

RGBlink FLEXpro 8 Manuel utilisateur

RGBlink

RGBlink MSP 202 Manuel utilisateur

RGBlink

RGBlink X14 Manuel utilisateur

RGBlink

RGBlink M2 Manuel utilisateur

RGBlink

RGBlink MSP 203 Manuel utilisateur

RGBlink

RGBlink FLEX RS1 Manuel utilisateur

RGBlink

RGBlink MSP 329 Manuel utilisateur

RGBlink

RGBlink FLEXpro 8 Manuel utilisateur

RGBlink

RGBlink VSP3500 Manuel utilisateur

RGBlink

RGBlink Q16pro Gen2 1U Manuel utilisateur

RGBlink

RGBlink FLEX 16 Manuel utilisateur

RGBlink

RGBlink DXP D0808 Manuel utilisateur

RGBlink

RGBlink Q16pro-2 Manuel utilisateur

RGBlink

RGBlink MSP Garage w-PSU Manuel utilisateur

RGBlink

RGBlink VENUS X7 Manuel utilisateur

RGBlink

RGBlink GX4 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur