Rexgear HYDRA-4 Manuel d'instructions
Bitcoin Machine CASE
HYDRA-4
1
Bitcoin Machine case
HYDRA-4
The Hydra 4 comes with pre-assembled parts for fast deployment:
Fan Holder
(pre-assembled)
GPU Holder
(pre-assembled)
MB Plate
Support Sticks
(pre-assembled)
PSU/SSD/HDD Holder
(pre-assembled)
2
HYDRA-4
Bitcoin Machine case
E
Screw Nut
Washer
MB plate & Support Sticks
MB plate & Support Sticks
MB Plate
Motherboard / 3.5" HDD
PSU / GPU
Stand Off
Cable Ties
3
Bitcoin Machine case
HYDRA-4
How To Install
Note: Throughout this guide, you will need to insert screw nuts into support
sticks using ONE of the following TWO methods:
Method A:
settle in.
Method B:
.
4
Bitcoin Machine case
HYDRA-4
1. Mount GPU Holder and Support Sticks to the PSU/SSD/HDD Holder
2. Mount the Fan Holder
Screw-E
Screw Nut
Support Sticks
GPU Holder
PSU/SSD/HDD Holder
Fan Holder
Screw-E
Screw Nut
5
Bitcoin Machine case
HYDRA-4
3. Insert four Screw Nuts to the bottom support sticks
4. Mount the MB Holder
Screw Nuts
Washer
Screw-E
6
HYDRA-4
Bitcoin Machine case
5. Mount your fans
6. Mount your motherboard
Screw-D
Screw-B
7
Bitcoin Machine case
HYDRA-4
7. Mount your SSD and HDD
8. Mount your power supplies
Screw-C
Screw-A
8
HYDRA-4
Bitcoin Machine case
9. Mount your graphics cards
Screw-A
Note: GPU bracket can be switched from 10 to 8 mounting patterns when
only using 8 cards.
HYDRA-4
support@rexgear.com
Table des matières
Autres manuels Rexgear Enceinte
