Retsch SM200 Manuel utilisateur

Translation Manual Cutting Mill SM200

Copyright by

Retsch GmbH

Rheinische Strasse 36

D-42781 Haan

Federal Republic of Germany

1Notes on the Operating Manual ............................................................................................................5

1.1 Explanations of the safety warnings.................................................................................................. 6

1.2 General safety instructions ................................................................................................................ 7

1.3 Repairs............................................................................................................................................... 8

2Confirmation ...........................................................................................................................................9

3Transport, scope of delivery, installation..........................................................................................10

3.1 Packaging........................................................................................................................................ 10

3.2 Transport.......................................................................................................................................... 10

3.3 Temperature fluctuations and condensed water ............................................................................. 10

3.4 Conditions for the place of installation............................................................................................. 10

3.5 Electrical connection........................................................................................................................ 11

3.6 Removing Transport Safeguards..................................................................................................... 11

3.7 Mounting the Feed Hopper.............................................................................................................. 12

3.7.1 Removing the Transport Safeguard ............................................................................................ 12

3.7.2 Mounting the Feed Hopper.......................................................................................................... 13

3.8 Installation of the machine............................................................................................................... 14

4Technical data.......................................................................................................................................15

4.1 Use of the machine for the intended purpose.................................................................................. 15

4.2 Emissions......................................................................................................................................... 16

4.3 Degree of protection ........................................................................................................................ 16

4.4 Motor rotation speed........................................................................................................................ 16

4.5 Receptacle volume.......................................................................................................................... 17

4.6 Rated power .................................................................................................................................... 17

4.7 Dimensions and weight.................................................................................................................... 17

4.8 Required floor space........................................................................................................................ 17

5Operating the machine ........................................................................................................................18

5.1 Views of the Instrument................................................................................................................... 18

5.2 Overview table of the parts of the device ........................................................................................ 21

5.3 Operating elements and displays .................................................................................................... 22

5.4 Overview Table of the Operating Elements and the Display........................................................... 22

5.5 Opening and closing of the grinding chamber................................................................................. 23

5.6 Mounting the bottom sieve............................................................................................................... 23

5.7 Replacing the rotor .......................................................................................................................... 23

5.7.1 Removing the Rotor..................................................................................................................... 24

5.7.2 Inserting the Rotor ....................................................................................................................... 24

5.8 Inserting the filter unit and collecting receptacle.............................................................................. 25

5.9 Starting the grinding process........................................................................................................... 25

5.10 Stopping the grinding process......................................................................................................... 26

6Mode of Operation of Feed Hopper ....................................................................................................27

7Assembling and using the cyclone ....................................................................................................28

7.1 Cyclone assembly............................................................................................................................ 28

7.2 Base plate for wide mouth bottles –assembly................................................................................ 31

8Cleaning and service ...........................................................................................................................34

8.1 Adjusting the cutting bars ................................................................................................................ 34

9Fault messages.....................................................................................................................................37

10 Disposal.................................................................................................................................................38

11 Index ......................................................................................................................................................39

Notes on the Operating Manual

1 Notes on the Operating Manual

This operating manual is a technical guide on how to operate the device safely and

it contains all the information required for the areas specified in the table of

contents. This technical documentation is a reference and instruction manual. The

individual chapters are complete in themselves.

Familiarity (of the respective target groups defined according to area) with the

relevant chapters is a precondition for the safe and appropriate use of the device.

This operating manual does not contain any repair instructions. If faults arise or

repairs are necessary, please contact your supplier or get in touch with Retsch

GmbH directly.

Application technology information relating to samples to be processed is not

included but can be read on the Internet on the respective device’s page at

www.retsch.com.

Changes

Subject to technical changes.

Disclosure or reproduction of this documentation, use and disclosure of its contents

are only permitted with the express permission of Retsch GmbH.

Infringements will result in damage compensation liability.

Notes on the Operating Manual

1.1 Explanations of the safety warnings

In this Operating Manual we give you the following safety warnings

Serious injury may result from failing to heed these safety warnings. We give you

the following warnings and corresponding content.

WARNING

Type of danger / personal injury

Source of danger

–Possible consequences if the dangers are not observed.

•Instructions on how the dangers are to be avoided.

We also use the following signal word box in the text or in the instructions on action

to be taken:

WARNING

Moderate or mild injury may result from failing to heed these safety warnings.

We give you the following warnings and corresponding content.

CAUTION

Type of danger / personal injury

Source of danger

–Possible consequences if the dangers are not observed.

•Instructions on how the dangers are to be avoided.

We also use the following signal word box in the text or in the instructions on action

to be taken:

CAUTION

In the event of possible property damage we inform you with the word

“Instructions” and the corresponding content.

NOTICE

Nature of the property damage

Source of property damage

–Possible consequences if the instructions are not observed.

•Instructions on how the dangers are to be avoided.

We also use the following signal word in the text or in the instructions on action to

be taken:

NOTICE

Notes on the Operating Manual

1.2 General safety instructions

CAUTION

Read the Operating Manual

Non-observance of these operating instructions

–The non-observance of these operating instructions can

result in personal injuries.

•Read the operating manual before using the device.

•We use the adjacent symbol to draw attention to the

necessity of knowing the contents of this operating

manual.

Target group : All persons concerned with the machine in any form

This machine is a modern, high performance product from Retsch GmbH and

complies with the state of the art. Operational safety is given if the machine is

handled for the intended purpose and attention is given to this technical

documentation.

You, as the owner/managing operator of the machine, must ensure that the people

entrusted with working on the machine:

•have noted and understood all the regulations regarding safety,

•are familiar before starting work with all the operating instructions and

specifications for the target group relevant for them,

•have easy access always to the technical documentation for this machine,

•and that new personnel before starting work on the machine are familiarised

with the safe handling of the machine and its use for its intended purpose,

either by verbal instructions from a competent person and/or by means of

this technical documentation.

Improper operation can result in personal injuries and material damage. You are

responsible for your own safety and that of your employees.

Make sure that no unauthorised person has access to the machine.

CAUTION

Changes to the machine

–Changes to the machine may lead to personal injury.

•Do not make any change to the machine and use spare parts and

accessories that have been approved by Retsch exclusively.

NOTICE

Changes to the machine

–The conformity declared by Retsch with the European Directives will lose

its validity.

–You lose all warranty claims.

•Do not make any change to the machine and use spare parts and

accessories that have been approved by Retsch exclusively.

Notes on the Operating Manual

Reperaturen

1.3 Repairs

This operating manual does not contain any repair instructions. For your own

safety, repairs may only be carried out by Retsch GmbH or an authorized

representative or by Retsch service engineers.

In that case please inform:

The Retsch representative in your country

Your supplier

Retsch GmbH directly

Your Service Address:

Confirmation

Bestätigung

2 Confirmation

This operating manual contains essential instructions for operating and maintaining

the device which must be strictly observed. It is essential that they be read by the

operator and by the qualified staff responsible for the device before the device is

commissioned. This operating manual must be available and accessible at the

place of use at all times.

The user of the device herewith confirms to the managing operator (owner) that

(s)he has received sufficient instructions about the operation and maintenance of

the system. The user has received the operating manual, has read and taken note

of its contents and consequently has all the information required for safe operation

and is sufficiently familiar with the device.

As the owner/managing operator you should for your own protection have your

employees confirm that they have received the instructions about the operation of

the machine.

I have read and taken note of the contents of all chapters in this operating

manual as well as all safety instructions and warnings.

User

Surname, first name (block letters)

Position in the company

Signature

Service technician or operator

Surname, first name (block letters)

Position in the company

Place, date and signature

Transport, scope of delivery, installation

3 Transport, scope of delivery, installation

3.1 Packaging

The packaging has been adapted to the mode of transport. It complies with the

generally applicable packaging guidelines.

NOTICE

Storage of packaging

–In the event of a complaint or return, your warranty claims may be

endangered if the packaging is inadequate or the machine has not been

secured correctly.

•Please keep the packaging for the duration of the warranty period.

3.2 Transport

NOTICE

Transport

–Mechanical or electronic components may be damaged.

•The machine may not be knocked, shaken or thrown during

transport.

3.3 Temperature fluctuations and condensed water

NOTICE

Temperature fluctuations

The machine may be subject to strong temperature fluctuations during transport

(e.g. aircraft transport)

–The resultant condensed water may damage electronic components.

•Protect the machine from condensed water.

3.4 Conditions for the place of installation

NOTICE

Ambient temperature

–Electronic and mechanical components may be damaged and the

performance data alter to an unknown extent.

•Do not exceed or fall below the permitted temperature range of the

machine (5°C to 40°C / ambient temperature).

Atmospheric humidity:

Maximum relative humidity 80% at temperatures up to 31°C, decreasing linearly up

to 50% relative humidity at 40°C

Autres manuels pour SM200

Table des matières

Autres manuels Retsch Mixer

Retsch

Retsch MM400 Manuel utilisateur

Manuels Mixer populaires d'autres marques

Bosch

Bosch GRW 9 Manuel utilisateur

MULTIQUIP

MULTIQUIP Whiteman WM45E Mode d’emploi

KitchenAid

KitchenAid KSM7581BZ0 Guide rapide

Jay-Lor

Jay-Lor 5050 Manuel utilisateur

Sunbeam

Sunbeam FPSBSM210X Manuel utilisateur

MULTIQUIP

MULTIQUIP Whiteman MC94S Mode d’emploi

Thinky

Thinky ARE-250 Manuel utilisateur

Midas

Midas XL4 Manuel utilisateur

bianco

bianco PURO 4 Manuel utilisateur

Paso

Paso DAG9200 Manuel utilisateur

Sima

Sima SFX-9A Manuel utilisateur

better chef

better chef IM-815WC Instructions d'installation

ALLEN & HEATH

ALLEN & HEATH GR1 Manuel utilisateur

Lacor

Lacor 69083 Fiche technique

M-Audio

M-Audio Midiman SAM Manuel utilisateur

Buffalo

Buffalo CP921 Manuel utilisateur

Pentair

Pentair HYPRO Cleanload 3376-0870 Instructions de fonctionnement

Cuisinart

Cuisinart SM50WHE Manuel utilisateur