ReSound LiNX 3D MIH Manuel utilisateur

Quick guide

ReSound LiNX 3D™ MIH

Product: ReSound LiNX 3D

Model: MIH

Serial number (R):

_______________________________

Serial number (L):

_______________________________

Battery size: 312 or 13

My hearing aid information

Volume control (C):

(if set up by your hearing care professional)

ACTION RESULT

Rotate forward

(toward your face) Volume increases

Rotate backward

(away from your

face)

Volume decreases

PROGRAM WHEN TO USE BEEPS

Programs:

(if set up by your hearing care professional)

Get to know your hearing aid

View ReSound hearing aid tutorial videos at youtube.com/resoundus.

A. Microphone

B. Battery door

C. Program button (optional)

D. Retrieval line

E. Vent

GN ReSound

XXXXXXXXXX

LTxMIH

GHI

F. Wax guard

G. Manufacturer

H. Serial number

I. Model D

Getting started: On/O function

ON: Insert battery & completely

close battery door (B).

Program 1 will be active.

OFF: Open the battery door (B).

Use ﬁngertip to pull it all the way.

OFF

What you need to know Inserting/Replacing the battery:

1. Open the

battery door (B)

completely by

using your

ﬁngertip.

2. Remove protective sticker from

battery and wait 2 minutes before

inserting the

battery into the

hearing aid to

allow full activation of the battery.

3. Insert the new battery

with the positive side

(ﬂat side) in the correct

position, as shown.

4. Gently close the battery door (B).

If it doesn’t close easily, check to

see if the battery is upside down.

Daily: Clean your hearing aid.

Keep your hearing aids dry. Clean

the hearing aids using a soft cloth

or tissue.

Monthly: Change the wax guard (F)

or see your hearing care professional.

For changing CeruSTOP™(white) wax

guards, complete the following steps:

Removal: Insert the removal side

of the wax guard tool into the used

wax guard so that the shaft of the

tool is touching the rim of the wax

guard. Slowly pull the wax guard

straight out.

Regular care & maintenance

removal side replacement side

Wax guard tool

For changing HF3 wax guard (F),

complete the following steps:

1. Brush the sound

outlet area with

the sound outlet

pointed down.

2. Insert the threaded end of the wax

guard tool into the used wax guard,

and rotate clockwise.

3. Gently pull until

the used guard is

removed.

Insertion: To insert the new wax

guard, gently press the replacement

side of the wax guard tool straight

into the hole of the sound outlet until

the outer ring lies ﬂush with the

outside of the receiver. Pull the tool

straight out. The new wax guard will

remain in place.

4. Discard

the used

guard in

the slot

located

in the wax guard kit by pressing it

into the center, sliding it to one end

of the slot, and pull until the ﬁlter

is discarded.

5. Flip the wax guard

tool around, locate

a new guard in the

dial, and press the

tip of the tool into

the center of the dial.

6. Gently pull the new

ﬁlter out of the dial.

7. Press the new guard to the canal

tip of the hearing aid. Move the

tool gently side to side and pull it

away from the hearing aid.

400707011 Rev A 2017.02

ReSound Government Services

8001 E. Bloomington Freeway

Bloomington, MN 55420

1.800.392.9932

www.resound.com/veterans

Manufacturer according

to FDA:

ReSound North America

8001 E. Bloomington Freeway

Bloomington, MN 55420

1.888.735.4327

resound.com

Manufacturer according

to Health Canada:

ReSound Canada

303 Supertest Road

Toronto, Ontario M3J 2M4

1.888.737.6863

resound.com

For more information

Refer to the user guide included in

your hearing aid box.

Your hearing care professional can

be reached at:

View ReSound hearing aid tutorial

videos at youtube.com/resoundus.

If there are any other problems not mentioned in this guide, please contact

ReSound or your hearing care professional.

SYMPTOM CAUSE POSSIBLE REMEDY

No sound Battery door not closed

Dead battery

Battery door will not close

Blocked wax guard

Turn on by closing the battery door (B)

Replace battery

Insert battery properly

Replace wax guard (F) or consult your

hearing care professional

Not loud

enough

Blocked sound outlet

Change in hearing, volume

too low

Excessive ear wax

Change wax guard (F) or consult your

hearing professional

Consult your hearing care professional

Excessive

whistling/

feedback

Incorrect placement in ear

Excessive ear wax

If none of the above

Re-insert hearing aid carefully

Clean guard/consult your hearing

care professional

Consult your hearing care professional

Troubleshooting

View ReSound hearing aid tutorial videos at youtube.com/resoundus.

Table des matières

Autres manuels ReSound Prothèse auditive

ReSound

ReSound Standard Tube Manuel utilisateur

ReSound

ReSound Standard Tube Manuel utilisateur

ReSound

ReSound LiNX Quattro MIH Manuel utilisateur

ReSound

ReSound Receiver-in-ear Hearing Instrument Manuel utilisateur

ReSound

ReSound LiNX 3D ITC Manuel utilisateur

ReSound

ReSound X-plore BTE XE71-DVI Manuel utilisateur

ReSound

ReSound SY312 Manuel utilisateur

ReSound

ReSound 3050M Manuel utilisateur

ReSound

ReSound IIC Manuel utilisateur

ReSound

ReSound BTE Manuel utilisateur

ReSound

ReSound x-Plore XE30 Manuel utilisateur

ReSound

ReSound AVENTA 3.9 Instructions de montage

ReSound

ReSound AZ30 Manuel utilisateur

ReSound

ReSound LiNX Quattro 61 Manuel utilisateur

ReSound

ReSound Essence ES50 Manuel utilisateur

ReSound

ReSound AZURE AZ10 Manuel utilisateur

ReSound

ReSound Linx Quattro Manuel utilisateur

ReSound

ReSound sparx Manuel utilisateur

ReSound

ReSound LS961-DRW LS761-DRW Manuel utilisateur

ReSound

ReSound be 9 Manuel utilisateur

ReSound

ReSound LINX 3D 61 Manuel utilisateur

ReSound

ReSound Match Series Manuel utilisateur

ReSound

ReSound SY312 Manuel utilisateur

ReSound

ReSound Nexia NX960S-DRWC Manuel utilisateur

Manuels Prothèse auditive populaires d'autres marques

Sonic

Sonic Bliss miniBTE Manuel utilisateur

Lexie

Lexie B1 Manuel de la liste des pièces

Widex

Widex FM+DEX Manuel utilisateur

Siemens

Siemens Triano Manuel utilisateur

Camplicomms

Camplicomms HC-200 Manuel utilisateur

Widex

Widex SUPER 220 S2-VSD Manuel utilisateur

Phonak

Phonak Q90 Manuel utilisateur

Williams Sound

Williams Sound SoundPlus WIR 237 Mode d’emploi

Oticon Medical

Oticon Medical Ponto SoundConnector Manuel utilisateur

Siemens

Siemens Life micon Manuel utilisateur

Starkey

Starkey Destiny Manuel utilisateur

Audicus

Audicus The Icon Manuel utilisateur

Advanced Bionics

Advanced Bionics Slim HP Standard Manuel utilisateur

Widex

Widex DREAM440 THE DREAM SERIES Manuel utilisateur

Phonak

Phonak myPilot Manuel utilisateur

NIKEN

NIKEN NK-401 Manuel utilisateur

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur

Sonetik

Sonetik GOHEAR Manuel utilisateur